The present research involves producing graphene oxide (GO) using the Hummers method, generating a composite using GO and PVA, and analyzing these composites’ structural and optical characteristics. PVA and GO were used in varied percentages to deal with the issue of how the features of GO/PVA alter depending on concentration. The impact of thermal annealing on the structure and optical characteristics of GO/PVA materials at various concentrations were also investigated. UV-VIS was used to investigate the band gap value of GO/PVA composites. The band gap value changed due to an increase in the concentration of GO in the composites in the PVA and the impact of thermal annealing. The band gap value, specific resistance, and dielectric constant were all found to be well controlled by varying the thermal annealing temperature and the concentration of GO in this case. Differential Scanning Calorimetry (DSC) and thermogravimetric analysis (TGA) were performed on pure PVA and GO/PVA samples in various percentages of GO in order to examine the effect of temperature on the physical properties of (n = 1, 2, 3, 5, 20%) nGO%/PVA nanocomposites. Thermal stability increased as the fraction of GO in the PVA polymer matrix increased.

In this study, porous polysiloxane (PS)/multi-walled carbon nanotube (MWCNT) nanocomposite films were developed as high-performance triboelectric layers for flexible triboelectric nanogenerators (TENGs). TENGs convert mechanical motion into electricity and offer a promising solution for self-powered electronic systems. The nanocomposites were fabricated using a doctor blading method, and porosity was introduced via a simple, scalable salt-leaching technique. Sieved salt particles of varying sizes produced films with fine, medium, and large pores. Raman spectroscopy confirmed uniform MWCNT dispersion and strong interfacial interaction within the PS matrix. SEM analysis verified controlled pore morphology. Dielectric measurements showed reduced permittivity with increasing pore size due to air void incorporation. Triboelectric performance improved significantly with porosity; the medium porosity sample exhibited the best output with an open-circuit voltage of 65 V, short-circuit current of 6.9 μA, and a power density of 280.6 mW m⁻². This enhancement is attributed to the optimized combination of surface roughness, contact area, and dielectric behavior, promoting efficient charge generation and transfer. These results highlight the potential of microstructural engineering in porous nanocomposites for next-generation energy harvesting applications.

Cd_xZn_1–xS nanoparticles were obtained by sonochemical method and were characterized by X-ray Diffraction (XRD), Energy Dispersive X-ray (EDX), Scanning Electron Microscopy (SEM), Ultraviolet-Visible (UV-vis), Fourier-transform infrared Spectroscopy (FTIR). Band gap of Cd_xZn_1–xS nanoparticles were determined in the range of 2.1 eV to 3.4 eV. Lattice structure of nanoparticles are changes from cubic to hexagonal by increasing of x value. At the formation process using three different capping agents (Polyvinyl alcohol (PVA),3-mercaptopropionic acid (MPA) and Styrene). From XRD results, the average sizes of Cd_0.4Zn_0.6S/PVA,Cd_0.4Zn_0.6S/Styrene and Cd_0.4Zn_0.6S/MPA nanoparticles were determined as 7 nm, 9 nm, and 5 nm, respectively. From SEM results, sizes of Cd_0.4Zn_0.6S/MPA and Cd_0.4Zn_0.6S/PVA nanoparticles are 10–15 nm and 4–5 nm. From EDX result, the elements ratio in finally formed sample overlaps with the initial ratios. The shift of the absorption band to the low frequency is due to the particle formation in the stabilizer, reduction of energy and the weakening of the vibration movement.

Graphene oxide (GO) nanosheets were functionalized with Schiff base and reduced Schiff base. Covalent and non-covalent functionalized GO nanostructures have been tested for the removal of pesticides with different chemical structures and properties (e.g., Epoxiconazole, Dimethomorph, Cyprodinil, Chlorothalonil, Acetochlor, Trifluralin) from aqueous solutions. The structure and morphology characteristics of the prepared structures were analyzed using techniques such as solid-state nuclear magnetic resonance (SSNMR), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Results of the experiments showed that, although the non-covalent functionalization did not affect the adsorption properties of GO much, the covalent functionalization increased the adsorption capacity of GO against the mentioned pesticides.

Herein, we introduce a simple precipitation method for preparing graphene oxide–silver nanoparticle (GO/AgNP) composites, utilizing Calendula officinalis (C. officinalis) seed extract as both a reducing and stabilizing agent. Our research combines the sustainable preparation of graphene oxide (GO) with the green synthesis of silver nanoparticles (AgNPs), aiming to explore the potential of the obtained composite as a novel antibacterial material. To establish a benchmark, the synthesis was also performed using sodium citrate, a conventional reducing agent. The resultant GO/AgNP composites were characterized through several analytical techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDS), Raman spectroscopy, X-ray diffraction (XRD), infrared (IR) spectroscopy, and ultraviolet–visible (UV-vis) spectroscopy, confirming the successful functionalization of GO with AgNPs. The antibacterial effectiveness of the composites was systematically assessed against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with nanoparticle concentrations spanning from 0 to 250 µg/mL, utilizing mostly disk diffusion and colony-forming unit (CFU) count assays. The AgNPs were characterized by a size range of 15–50 nm. Notably, the GO/AgNP composite prepared using C. officinalis seed extract demonstrated superior antibacterial activity at all tested concentrations, outperforming both pure GO and the GO/AgNP composite prepared with sodium citrate. The most pronounced antibacterial effect was observed at a concentration of 32.0 µg/mL. Therefore, this innovative synthesis approach may offer a valuable contribution to the development of new therapeutic agents to combat bacterial infections, suggesting further exploration into antibacterial coatings or potential drug development.