To estimate the state of health, charge, power, and safety (SoX) of lithium-ion batteries (LiBs) in real time, battery management systems (BMSs) need accurate and efficient battery models. The full-order partial two-dimensional (P2D) model is a common physics-based cell-level LiB model that faces challenges for real-time BMS implementation due to the complexity of its numerical solver. In this paper, we propose a method to discretise the P2D model equations using the Finite Volume and Verlet Integration Methods to significantly reduce the computational complexity of the solver. Our proposed iterative solver uses novel convergence criteria and physics-based initial guesses to provide high fidelity for discretised P2D equations. We also include both the kinetic-limited and diffusion-limited models for Solid Electrolyte Interface (SEI) growth into an iterative P2D solver. With these SEI models, we can estimate the capacity fade in real time once the model is tuned to the cell–voltage curve. The results are validated using three different operation scenarios, including the 1C discharge/charge cycle, multiple-C-rate discharges, and the Lawrence Livermore National Laboratory dynamic stress test. The proposed solver shows at least a 4.5 times improvement in performance with less than 1% error when compared to commercial solvers.

Lithium‐ion battery is the commonly used energy storage technology in electric vehicles (EVs) because of its inexpensive manufacturing cost and high energy capacity. For optimal utilization of its capacity and lifetime, reliable state of health (SoH) monitoring solutions have to be included in the battery management system (BMS). SoH of a cell is affected by several reasons such as internal degradation or external damages that need to be estimated. This article analyses the current density in electrode and electrolyte of an EV lithium‐ion cell using a simulation assisted method that leads to improvement in SoH estimation accuracy. The experimental results are analysed through the fusion of the magnetic field images captured by quantum fluxgate magnetometers, installed on the surface of the cell, together with the real‐time simulation of the multi‐physics model of the cell. The magnetic field sensors measure the magnetic field intensity with an accuracy of ±2 mT. The real‐time simulation input data is updated from the measurements of both the magnetic field sensors and the battery cycler. The multi‐physics model of the cell is developed in COMSOL modelling software, and real‐time data fusion process is implemented on dSPACE Microlabbox real‐time simulator. Results confirm that the proposed monitoring solution provides useful insight that can be employed in ageing estimation of EV batteries.

Lithium-ion batteries (LiBs) are used as the main power source in electric vehicles (EVs). Despite their high energy density and commercial availability, LiBs chronically suffer from non-uniform cell ageing, leading to early capacity fade in the battery packs. In this paper, a non-invasive, online characterisation method based on deep learning models is proposed for cell-level SoH estimation. For an accurate measurement of the state of health (SoH), we need to characterize electrochemical capacity fade scenarios carefully. Then, with the help of real-time monitoring, the control systems can reduce the LiB’s degradation. The proposed method, which is based on convolutional neural networks (CNN), characterises the changes in current density distributions originating from the positive electrodes in different SoH states. For training and classification by the deep learning model, current density images (CDIs) were experimentally acquired in different ageing conditions. The results confirm the efficiency of the proposed approach in online SoH estimation and the prediction of the capacity fade scenarios.

The privacy of electricity consumers has become one of the most critical subjects in designing smart meters and their proliferation. In this work, a multilayer architecture has been proposed for anonymous data collection from smart meters, which provides: (1) The anonymity of information for third‐party data consumers; (2) Secure communication to utility provider network for billing purposes; (3) Online control of data sharing for end‐users; (4) Low communication costs based on available Internet of things (IoT) communication protocols. The core elements of this architecture are, first, the digital twin equivalent of the cyber‐physical system and, second, the Tangle distributed ledger network with IOTA cryptocurrency. In this architecture, digital twin models are updated in real‐time by information received from trusted nodes of the Tangle distributed network anonymously. A small‐scale laboratory prototype based on this architecture has been developed using the dSPACE SCALEXIO real‐time simulator and open‐source software tools to prove the feasibility of the proposed solution. The numerical results confirm that after a few seconds of anomaly detection, the microgrid was fully stabilized around its operating point with less than 5% deviation during the transition time.

In a microgrid, real-time state estimation has always been a challenge due to several factors such as the complexity of computations, constraints of the communication network and low inertia. In this paper, a real-time event-based optimal linear state estimator is introduced, which uses the send-on-delta data collection approach over wireless sensors networks and exhibits low computation and communication resources cost. By employing the send-on-delta event-based measurement strategy, the burden over the wireless sensor network is reduced due to the transmission of events only when there is a significant variation in the signals. The state estimator structure is developed based on the linear Kalman filter with the additional steps for the centralized fusion of events data and optimal reconstruction of signals by projection onto convex sets. Also for the practical feasibility analysis, this paper developed an Internet of things prototype platform based on LoRaWAN protocol that satisfies the requirements of the proposed state estimator in a microgrid.