Ultraviolet (UV) photodetector has attracted extensive interests due to its wide-ranging applications from defense technology to optical communications. The use of wide bandgap metal oxide semiconductor materials is of great interest in the development of UV photodetector due to their unique electronic and optical properties. In this work, deep UV photodetector based on NiO/β-Ga2O3 heterojunction was developed and investigated. The β-Ga2O3 layer was prepared by magnetron sputtering and exhibited selective orientation along the family of ( $$ \overline{2} $$ 01) crystal plane after annealing. The photodetector demonstrated good performance with a high responsivity (R) of 27.43 AW−1 under a 245-nm illumination (27 μWcm−2) and the maximum detectivity (D*) of 3.14 × 1012 cmHz1/2 W−1, which was attributed to the p-NiO/n-β-Ga2O3 heterojunction.
In this paper, we have presented the use of flexographic printing techniques in the selective patterning of gold nanoparticles (AuNPs) onto a substrate. Highly uniform coverage of AuNPs was selectively patterned on the substrate surface, which was subsequently used in the development of a glucose sensor. These AuNPs provide a biocompatible site for the attachment of enzymes and offer high sensitivity in the detection of glucose due to their large surface to volume ratio. The average size of the printed AuNPs is less than 60 nm. Glucose sensing tests were performed using printed carbon-AuNP electrodes functionalized with glucose oxidase (GOx). The results showed a high sensitivity of 5.52 μA mM−1 cm−2 with a detection limit of 26 μM. We have demonstrated the fabrication of AuNP-based biosensors using flexographic printing, which is ideal for low-cost, high-volume production of the devices.
1 December 2016 in ACS Applied Materials & Interfaces
Zero-dimensional graphene quantum dots (GQDs) exhibit many different properties, such as strong fluorescence, nonzero bandgap and solubility in solvents, compared to two-dimensional graphene. GQDs are biocompatible and have low toxicity; hence, they are widely used in the biomedical field. The edge effect of GQDs is of particular interest because edge modification can regulate the performance of nanomaterials. In this review, various preparation methods for GQDs, which can be divided into three main categories, namely top-down, bottom-up and chemical methods, are discussed. The unique optical, electrical, thermal and magnetic properties of GQDs are reviewed. The functionalization of GQDs by doping with heteroatoms and forming composites with other materials is studied, and the characteristics of these GQDs are also discussed. The applications of these GQDs in the fields of optics, electricity, optoelectronics, biomedicine, energy, agriculture and other emerging interdisciplinary fields are reviewed to highlight the enormous potential of nanomaterials. This review reports on the recent advancement in GQD research and suggests future directions for the development of GQDs.