The self-propulsion of a spherical squirmer – a model swimming organism that achieves locomotion via steady tangential movement of its surface – is quantified across the transition from viscously to inertially dominated flow. Specifically, the flow around a squirmer is computed for Reynolds numbers ( $Re$ ) between 0.01 and 1000 by numerical solution of the Navier–Stokes equations. A squirmer with a fixed swimming stroke and fixed swimming direction is considered. We find that fluid inertia leads to profound differences in the locomotion of pusher (propelled from the rear) versus puller (propelled from the front) squirmers. Specifically, pushers have a swimming speed that increases monotonically with $Re$ , and efficient convection of vorticity past their surface leads to steady axisymmetric flow that remains stable up to at least $Re=1000$ . In contrast, pullers have a swimming speed that is non-monotonic with $Re$ . Moreover, they trap vorticity within their wake, which leads to flow instabilities that cause a decrease in the time-averaged swimming speed at large $Re$ . The power expenditure and swimming efficiency are also computed. We show that pushers are more efficient at large $Re$ , mainly because the flow around them can remain stable to much greater $Re$ than is the case for pullers. Interestingly, if unstable axisymmetric flows at large $Re$ are considered, pullers are more efficient due to the development of a Hill’s vortex-like wake structure.
The locomotion of a spherical squirmer — a model organism that achieves self-propulsion via steady tangential movement of its surface — is quantified at small Reynolds number R. Matched asymptotic expansions are employed to calculate the swimming velocity of the squirmer through O(R2). Approximations to the velocity and vorticity fields around the squirmer that are uniformly valid to O(R) are also constructed.
Understanding the flow created by particle motion at interfaces is a critical step toward understanding hydrodynamic interactions and colloidal self organization. We have developed correlated displacement velocimetry to measure flow fields around interfacially trapped Brownian particles. These flow fields can be decomposed into interfacial hydrodynamic multipoles, including force monopole and dipole flows. These structures provide key insights essential to understanding the interface’s mechanical response. Importantly, the flow structure shows that the interface is incompressible for scant surfactant near the ideal gaseous state and contains information about interfacial properties and hydrodynamic coupling with the bulk fluid. The same dataset can be used to predict the response of the interface to applied, complex forces, enabling virtual experiments that produce higher order interfacial multipoles.
Controlled assembly of microscale objects can be achieved by exploiting interactions that dominate at that length scale. Capillary interactions are an excellent candidate for this purpose; microparticles trapped at fluid interfaces disturb the interface shape, migrate, and assemble to minimize the interfacial area. These interactions are independent of microparticle material properties and so can be used to assemble objects of arbitrary materials. By using a magnetic robot as a mobile distortion source, additional control over assembly can be achieved. For example, millimeter-scale magnetic robots that are heavy enough to distort the interface have been used to generate long range capillary attractions and collect passive particles that are hundreds of micrometers in diameter. However, for smaller robots and particles, gravity is less important, and capillary interactions rely on interface distortions from undulated contact lines. We use a magnetic microrobot to manipulate passive microparticles at the water/hexadecane interface via an interplay of hydrodynamic and capillary interactions. Furthermore, we demonstrate preferred docking at corners of a square microrobot without the need for high resolution position control. We modulate the strength of docking interactions, allowing structure assembly and release. Finally, we design undulated docking stations with multiple stable sites for cargo delivery. The ability to dynamically manipulate microparticles and their structures at fluid interfaces creates new possibilities for manufacturing of complex microstructures.
We derive expressions for the leading-order far-field flows generated by externally driven and active (swimming) colloids at planar fluid–fluid interfaces. We consider colloids adjacent to the interface or adhered to the interface with a pinned contact line. The Reynolds and capillary numbers are assumed much less than unity, in line with typical micron-scale colloids involving air– or alkane–aqueous interfaces. For driven colloids, the leading-order flow is given by the point-force (and/or torque) response of this system. For active colloids, the force-dipole (stresslet) response occurs at leading order. At clean (surfactant-free) interfaces, these hydrodynamic modes are essentially a restricted set of the usual Stokes multipoles in a bulk fluid. To leading order, driven colloids exert Stokeslets parallel to the interface, while active colloids drive differently oriented stresslets depending on the colloid's orientation. We then consider how these modes are altered by the presence of an incompressible interface, a typical circumstance for colloidal systems at small capillary numbers in the presence of surfactant. The leading-order modes for driven and active colloids are restructured dramatically. For driven colloids, interfacial incompressibility substantially weakens the far-field flow normal to the interface; the point-force response drives flow only parallel to the interface. However, Marangoni stresses induce a new dipolar mode, which lacks an analogue on a clean interface. Surface-viscous stresses, if present, potentially generate very long-ranged flow on the interface and the surrounding fluids. Our results have important implications for colloid assembly and advective mass transport enhancement near fluid boundaries.
We assess the ability of a self-propelled swimmer to displace a volume of fluid that is large compared to its own volume via the mechanism of partial drift. The swimmer performs rectilinear locomotion in an incompressible, unbounded Newtonian fluid. The partial drift volume is the volume of fluid enclosed between the initial and final profiles of an initially flat circular disk of marked fluid elements; the disk is initially aligned perpendicular to the direction of locomotion and subsequently distorted due to the passage of the swimmer, which travels a finite distance. To focus on the possibility of large-scale drift, we model the swimmer simply as a force dipole aligned with the swimming direction. At zero Reynolds number (), we demonstrate that grows without limit as the radius of the marked fluid disk is made large, indicating that a swimmer at can generate a partial drift volume much larger than its own volume. Next, we consider a steady swimmer at small , which is modeled as the force-dipole solution to Oseen's equation. Here, we find that no longer diverges with , which is due to inertial screening of viscous forces, and is effectively proportional to the magnitude of the force dipole exerted by the swimmer. The validity of this result is extended to —the realm of intermediate- swimmers such as copepods—by taking advantage of the fact that, in this case, the flow is also described by Oseen's equations at distances much larger than the characteristic linear dimension of the swimmer. Next, we utilize an integral momentum balance to demonstrate that our analysis for a steady inertial swimmer also holds, in a time-averaged sense, for an unsteady swimmer that does not experience a net acceleration over a stroke cycle. Finally, we use experimental data to estimate for a few real swimmers. Interestingly, we find that depends heavily on the kinematics of swimming, and, in certain cases, can be significantly greater than the volume of the swimmer at . Our work also highlights that due to a self-propelled body is fundamentally different than that due to a body towed by an external force. In particular, predictions of in the latter case cannot be utilized to estimate for a self-propelled swimmer.