In contemporary civilization, the electromagnetic radiation from electronic devices and communication systems has become a substantial pollutant. High-performance electromagnetic absorbers have become a solution for absorbing unwanted electromagnetic waves. This research proposed a lightweight and flexible electromagnetic absorber produced from natural rubber filled with conductive carbon black (CCB) and Fe3O4. The effect of CCB, Fe3O4, and a combination of CCB and Fe3O4 as a hybrid filler on foam morpholog, electromagnetic reflectivity, tensile strength, and compression set properties were investigated. In addition, the effect of the alternating layered structure of CCB and Fe3O4 on electromagnetic absorption was investigated. The results indicated that the composite foam exhibited an interconnected network structure that enhanced the electromagnetic attenuation in the absorber. CCB increased the electromagnetic absorption of the foam, whereas Fe3O4 had less of an effect. The foam filled with the hybrid filler at the CCB/Fe3O4 ratio of 8/2 exhibited excellent electromagnetic absorption. The composite foam had a higher tensile modulus and higher strength compared to neat foam. The addition of CCB decreased the compression set; however, the compression set was improved by the incorporation of Fe3O4. Composite foams filled with hybrid filler can serve as highly efficient electromagnetic absorbing materials.
The influence of filler type and content on the wettability and interfacial bonding between thermoplastic elastomer (TPE) and polypropylene (PP) by using the injection overmolding process was investigated in this study. Calcium carbonate (CaCO 3 ) and talcum (Talc) masterbatchs, ranging from 0 to 40 percent by weight (wt%), were mixed into the PP matrix as fillers. The bond strength of TPE overmolded onto PP composites was characterized by the tensile and tear tests. Good compatibility was observed between TPE and PP filled with various amounts of CaCO 3 and Talc. In the case of the tensile test, the crack initiation stress, ultimate tensile strength, strain at break, and bond energy were found to decrease with increasing filler content. The results obtained from the tear test indicated that the propagation strength, ultimate tear strength, strain at break, and bond energy of injection overmolded TPE-PP filled with various CaCO 3 contents did not significantly change compared to those obtained from Talc. This can be attributed to the high reinforcing efficiency of Talc in comparison with CaCO 3 , which can enhance the stiffness and thermal resistance of the PP matrix. As a result, the contact area becomes more resistant to molecular diffusion of TPE chains, particularly at high Talc loadings (30 and 40 wt%), leading to the reduction of interfacial bonding.