A high-strength bolt connection is the key component of large-scale steel structures. Bolt loosening and preload loss during operation can reduce the load-carrying capacity, safety, and durability of the structures. In order to detect loosening damage in multi-bolt connections of large-scale civil engineering structures, we proposed a multi-bolt loosening identification method based on time-frequency diagrams and a convolutional neural network (CNN) using vi-bro-acoustic modulation (VAM) signals. Continuous wavelet transform was employed to obtain the time-frequency diagrams of VAM signals as the features. Afterward, the CNN model was trained to identify the multi-bolt loosening conditions from the raw time-frequency diagrams intelligently. It helps to get rid of the dependence on traditional manual selection of simplex and ineffective damage index and to eliminate the influence of operational noise of structures on the identification accuracy. A laboratory test was carried out on bolted connection specimens with four high-strength bolts of different degrees of loosening. The effects of different excitations, CNN models, and dataset sizes were investigated. We found that the ResNet-50 CNN model taking time-frequency diagrams of the hammer excited VAM signals, as the input had better performance in identifying the loosened bolts with various degrees of loosening at different positions. The results indicate that the proposed multi-bolt loosening identification method based on VAM and ResNet-50 CNN can identify bolt loosening with a reasonable accuracy, computational efficiency, and robustness.
Cable force estimation is essential for security assessment of cable-stayed bridges. Cable force estimation methods based on the relationship between cable force and frequency have been extensively studied and used during both construction phase and service phase. However, the effect induced by inclination angle of the cable is not included in the establishment of frequency-cable force relationship as horizontal cable model is normally employed. This study aims to investigate the influence of the inclination angle on vibration based cable force estimation and provide practical formulas accordingly. Firstly numerical examples of fixed-fixed and hinged-hinged cables are simulated to illustrate the necessity of considering the inclination angle effect on the modal parameters and cable force estimation for inclined cables with small sag. Then practical formulas considering the inclination angle effect to estimate the cable force of fixed-fixed and hinged-hinged cables via the fundamental frequency are established accordingly. For the inclined cables with unknown boundary conditions, the coefficients reflecting boundary condition are predicted via the practical formulas for fixed-fixed and hinged-hinged cables. And the cable force considering the influence of inclination angle and unknown boundary conditions is obtained by iteration method. Finally, numerical examples are presented to demonstrate the effectiveness of the proposed method.
Operational modal analysis of structures by stochastic subspace identification with a delay index operational modal analysis;non-white noise ambient excitations;stochastic subspace identification;delay index; Practical ambient excitations of engineering structures usually do not comply with the stationary-white-noise assumption in traditional operational modal analysis methods due to heavy traffic, wind guests, and other disturbances. In order to eliminate spurious modes induced by non-white noise inputs, the improved stochastic subspace identification based on a delay index is proposed in this paper for a representative kind of stationary non-white noise ambient excitations, which have nonzero autocorrelation values near the vertical axis. It relaxes the stationary-white-noise assumption of inputs by avoiding corresponding unqualified elements in the Hankel matrix. Details of the improved stochastic subspace identification algorithms and determination of the delay index are discussed. Numerical simulations on a four-story frame and laboratory vibration experiments on a simply supported beam have demonstrated the accuracy and reliability of the proposed method in eliminating spurious modes under non-white noise ambient excitations.
Full‐field dynamic displacement (FFDD) is important for bridge condition assessment. However, it is challenging to monitor the FFDD with high accuracy due to limited sensors and environment variation. This paper proposes a FFDD reconstruction method for bridge based on modal learning. Firstly, the transfer function of dynamic strain response of finite points (SRFP) and FFDD are derived based on the beam bending theory and modal superposition method. Then iterative particle swarm optimization (IPSO) is employed to facilitate self‐learning of mode shape with the ability of adapting environment variation. Subsequently, the procedure for reconstructing bridge FFDD by utilizing SRFP and the learned transfer function is provided. Finally, the effectiveness of the proposed method is verified by numerical and experimental examples of bridge under random load, impact load, and moving load excitation, and effects of sensor placement, road roughness, and measurement noise on the reconstruction accuracy are systematically investigated. The results indicate that the proposed method can accurately reconstruct the FFDD in the presence of environment variation, road roughness, and measurement noise at the cost of limited sensors.