This book equips the reader to understand every important aspect of the dynamics of rotating machines. Will the vibration be large? What influences machine stability? How can the vibration be reduced? Which sorts of rotor vibration are the worst? The book develops this understanding initially using extremely simple models for each phenomenon, in which (at most) four equations capture the behavior. More detailed models are then developed based on finite element analysis, to enable the accurate simulation of the relevant phenomena for real machines. Analysis software (in MATLAB) is associated with this book, and novices to rotordynamics can expect to make good predictions of critical speeds and rotating mode shapes within days. The book is structured more as a learning guide than as a reference tome and provides readers with more than 100 worked examples and more than 100 problems and solutions.

A common energy harvesting device uses a piezoelectric patch on a cantilever beam with a tip mass. The usual configuration exploits the linear resonance of the system; this works well for harmonic excitation and when the natural frequency is accurately tuned to the excitation frequency. A new configuration is proposed, consisting of a cantilever beam with a tip mass that is mounted vertically and excited in the transverse direction at its base. This device is highly non-linear with two potential wells for large tip masses, when the beam is buckled. The system dynamics may include multiple solutions and jumps between the potential wells, and these are exploited in the harvesting device. The electromechanical equations of motion for this system are developed, and its response for a range of parameters is investigated using phase portraits and bifurcation diagrams. The model is validated using an experimental device with three different tip masses, representing three interesting cases: a linear system; a low natural frequency, non-buckled beam; and a buckled beam. The most practical configuration seems to be the pre-buckled case, where the proposed system has a low natural frequency, a high level of harvested power and an increased bandwidth over a linear harvester.