Stable, quiet, and efficient propulsion methods are essential for underwater robots to complete their tasks in a complex marine environment. However, with a single propulsion method, such as propeller propulsion and bionic propulsion, it is difficult to achieve high efficiency and high mobility at the same time. Based on the advantages of the high-efficiency propulsion of a bionic undulating fin and the stable control of the propeller, an underwater robot based on the hybrid propulsion of a quadrotor and undulating fin is proposed in this paper. This paper first introduces the mechanical implementation of the underwater robot. Then, based on kinematic modeling and theoretical derivation, the underwater motion and attitude of the robot are analyzed and the 6-DOF dynamic equation of the robot is established. Finally, the underwater motion performance of the robot is verified through field experiments. The experimental results show that the robot can realize the heave motion, surge motion, and in-situ steering motion independently and can hover stably. When the undulating frequency is 6 Hz, the maximum propulsion speed of the robot can reach up to 1.2 m/s (1.5 BL/s).

Amphibious robots have broad prospects in the fields of industry, defense, and transportation. To improve the propulsion performance and reduce operation complexity, a novel bionic amphibious robot, namely AmphiFinbot-II, is presented in this paper. The swimming and walking components adopt a compound drive mechanism, enabling simultaneous control for the rotation of the track and the wave-like motion of the undulating fin. The robot employs different propulsion methods but utilizes the same operation strategy, eliminating the need for mode switching. The structure and the locomotion principle are introduced. The performance of the robot in different motion patterns was analyzed via computational fluid dynamics simulation. The simulation results verified the feasibility of the wave-like swimming mechanism. Physical experiments were conducted for both land and underwater motion, and the results were consistent with the simulation regulation. Both the underwater linear and angular velocity were proportional to the undulating frequency. The robot’s maximum linear speed and steering speed on land were 2.26 m/s (2.79 BL/s) and 442°/s, respectively, while the maximum speeds underwater were 0.54 m/s (0.67 BL/s) and 84°/s, respectively. The research findings indicate that the robot possesses outstanding amphibious motion capabilities and a simplistic yet unified control approach, thereby validating the feasibility of the robot’s design scheme, and offering a novel concept for the development of high-performance and self-contained amphibious robots.

With the safety and reliability of the electrical equipment used in information systems becoming more important, prefabricated fire-extinguishing devices using heptafluoropropane as the extinguishing agent have broad application prospects. However, few studies have focused on the vaporization performance of heptafluoropropane in the context of fire suppression and the safe distance for electrical equipment. This study proposes a numerical simulation model to analyze the vaporization and cooling performance of sprayed heptafluoropropane. First, experimental measurements with no fire source are performed to verify the numerical model. Through numerical and experimental methods, the temperature, concentration, and velocity distribution of the sprayed heptafluoropropane are analyzed to improve its vaporization performance and determine the safe distance. Finally, heptafluoropropane spraying with a fire source is simulated, allowing for the discussion of its cooling effect and fire-extinguishing performance. The results illustrate that the mass ratio of liquid and gas phases in the sprayed heptafluoropropane are 20.2% and 79.8%, respectively. Heptafluoropropane spraying reduced the average temperature in the protective room, with the final value reaching 270 K. The mass fraction of the heptafluoropropane maintained a value of 0.1 at a distance of 0.8 m in front of the nozzle axis. The main findings of this research indicate the temperature variation and fluid flow performance associated with heptafluoropropane spraying, as well as providing a reference value for a safe distance from the nozzle.

The fish-like propulsion robot is becoming a profound intelligent equipment due to its excellent swimming ability and good environmental adaptability. In this paper, we propose the oscillating fin based on the fish swimming mechanism, which is compounded with the locomotion modes of sway and yaw. The kinematic and dynamic models are established to study the locomotion mechanism of the oscillating fin. The hydrodynamic performance of underwater locomotion is investigated to analyze the velocity, the propulsive force, the pressure, the propulsive efficiency, and the vortices property. Finally, the experimental measurements of the robot with oscillating fin propulsion are carried out to analyze the underwater propulsion of the oscillating fin and the unsteady fluid flow with Strouhal number. The results illustrate that the propulsive force is fluctuating, and the velocity is increasing to the maximum value. The underwater propulsion velocity could reach 1.2 m/s in a period of 0.4 s. Besides, the high- and low-pressure regions change alternatively, and the fin deforming process illustrates the vortices property and the locomotion mechanism analyses. The propulsive efficiency of the oscillating fin with compound waves is increased by 11% compared with that of the one without deformation. The experiments of the robot prototype verify the numerical simulation, and the propulsive velocity with a period of 0.4 s is two times larger than that of a period of 0.8 s. The Strouhal number of each motion mode is obtained through theoretical and experimental analyses.

As the demand for marine resource development escalates, underwater robots have gained prominence as a technological alternative to human participation in deep-sea exploration, resource assessments, and other intricate tasks, underscoring their academic and engineering importance. Traditional underwater robots, however, typically exhibit limited resilience to environmental disturbances and are readily obstructed or interfered with by aquatic vegetation, sediments, and other physical impediments. This paper examines the biological locomotion mechanisms of black ghostfish, which utilize undulatory fins and flapping wings, and presents a coupled undulatory-flapping propulsion strategy to facilitate rapid movement and precise posture adjustment in underwater robots. A multimodal undulatory-flapping bio-inspired underwater robotic platform is proposed, with a systematic explanation of its structure and motion principles. Additionally, kinematic and dynamic models for coordinated propulsion with multiple actuators are developed, and the robot’s performance under various driving modes is evaluated using computational fluid dynamics simulations. The simulation outcomes confirm the viability of the developed dynamic model. A prototype was constructed, and a PID-based control algorithm was developed to assess the robot’s performance in linear movement, turning, and other behaviors in both undulatory fin and flapping modes. Experimental findings indicate that the robot, functioning in undulatory fin propulsion mode at a frequency of 2.5 Hz, attains a velocity of 0.35 m/s, while maintaining attitude angle fluctuation errors within ±5°. In the flapping propulsion mode, precise posture modifications can be executed. These results validate the feasibility of the proposed multimodal bio-inspired underwater robot design and provide a new approach for the development of high-performance, autonomous bio-inspired underwater robots.