In this work, we propose a hybrid and unique process combining solar irradiation and post-plasma catalysis (PPC) for the effective oxidation of toluene over a highly active and stable MnO2/GFF (bifunctional graphene fin foam) catalyst. The bifunctional GFF, serving as both the catalyst support and light absorber, is decorated with MnO2 nanofins, forming a hierarchical fin-on-fin structure. The results show that the MnO2/GFF catalyst can effectively capture and convert renewable solar energy into heat (absorption of >95%), leading to a temperature rise (55.6 °C) of the catalyst bed under solar irradiation (1 sun, light intensity 1000 W m–2). The catalyst weight (9.8 mg) used in this work was significantly lower (10–100 times lower) than that used in previous studies (usually 100–1000 mg). Introducing solar energy into the typical PPC process via solar thermal conversion significantly enhances the conversion of toluene and CO2 selectivity by 36–63%, reaching ∼93% for toluene conversion and ∼83% for CO2 selectivity at a specific input energy of ∼350 J L–1, thus remarkably reducing the energy consumption of the plasma-catalytic gas cleaning process. The energy efficiency for toluene conversion in the solar-enhanced post-plasma catalytic (SEPPC) process reaches up to 12.7 g kWh–1, ∼57% higher than that using the PPC process without solar irradiation (8.1 g kWh–1), whereas the energy consumption of the SEPPC process is reduced by 35–52%. Moreover, the MnO2/GFF catalyst exhibits an excellent self-cleaning capability induced by solar irradiation, demonstrating a superior long-term catalytic stability of 72 h at 1 sun, significantly better than that reported in previous works. The prominent synergistic effect of solar irradiation and PPC with a synergistic capacity of ∼42% can be mainly attributed to the solar-induced thermal effect on the catalyst bed, boosting ozone decomposition (an almost triple enhancement from ∼0.18 gO3 g–1 h–1 for PPC to ∼0.52 gO3 g–1 h–1 for SEPPC) to generate more oxidative species (e.g., O radicals) and enhancing the catalytic oxidation on the catalyst surfaces, as well as the self-cleaning capacity of the catalyst at elevated temperatures driven by solar irradiation. This work opens a rational route to use abundant, renewable solar power to achieve high-performance and energy-efficient removal of volatile organic compounds.
Highly-oriented, interconnected graphene frameworks have been considered as promising candidates to realize high-performance thermal management in microelectronics. However, the obvious thermal boundary resistance and anisotropic heat conduction still remain major bottlenecks for efficient heat dissipation. Herein, a biomimetic design enabled by radially aligned, bimodal graphene frameworks (RG-Fin) is proposed to achieve highly efficient and isotropic thermal transport. An interconnected RG skeleton is prepared via a radial ice-template method, serving as the primary expressway for isotropic heat conduction. Tree-leaf-like graphene nanofins are vertically grown on the RG surface to provide additional thermal pathways for bimodal phonon transportation, which can reduce the thermal boundary resistance without degrading the thermal properties of the skeleton. An RG-Fin composite exhibits a superior thermal conductivity of 4.01 W m−1 K−1 (almost 20 times that of a polymer) at an ultralow loading of 1.53 vol%, demonstrating an exceptionally large thermal conductivity enhancement efficiency of 1247%, which far exceeds those of graphene-based polymer composites. Further theoretical analysis and finite element simulations reveal the critical role of the nanofins in significantly decreasing the thermal boundary resistance (by almost 27-fold). Finally, the practical thermal management of running a CPU module is demonstrated, in which the heating-up rate of the RG-Fin composite is ∼2.0 times that of a pure polymer. This strategy provides an innovative avenue for designing radially aligned networks to realize isotropic and efficient thermoconductive composites for thermal management.
Supercapacitors with high energy and power densities have become highly desirable in practical applications. Ionic liquids (ILs) are considered as promising electrolytes of supercapacitors owing to their excellent electrochemical stability window (approx. 4–6 V) and good thermal stability. However, the high viscosity (up to 102 mPa s) and low electric conductivity (<10 mS cm−1) at room-temperature extremely reduce the ion diffusion dynamics in the energy storage process, resulting in the unsatisfactory power density and rate performance of supercapacitors. Herein we propose a novel binary ionic liquids (BILs) hybrid electrolyte composed of two kinds of ILs in an organic solvent. Along with the organic solvent with high dielectric constant and low viscosity, the addition of binary cations effectively improves the electric conductivity and reduces the viscosity of IL electrolytes. By mixing trimethyl propylammonium bis(trifluoromethanesulfonyl)imide ([TMPA][TFSI]) and N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([Pyr14][TFSI]) with an equal mole ratio in acetonitrile (1 M), the as-prepared BILs electrolyte shows superior electric conductivity (44.3 mS cm−1), low viscosity (0.692 mPa s), and a wide electrochemical stability window (4.82 V). The supercapacitors assembled with activated carbon electrodes (commercial mass loading) and this BILs electrolyte achieve a high working voltage of 3.1 V, leading to a maximum energy density of 28.3 W h kg−1 at 803.35 W kg−1 and a maximum power density of 32.16 kW kg−1 at 21.17 W h kg−1, which are obviously superior to those of commercial supercapacitors based on organic electrolytes (2.7 V).
In-plasma catalysis has been considered as a promising technology to degrade volatile organic compounds. Heterogeneous catalysts, especially binary metal oxide catalysts, play an important role in further advancing the catalytic performance of in-plasma catalysis. This work investigates the toluene decomposition performance over Co–Ce binary metal oxide catalysts within the in-plasma catalysis. Co–Ce catalysts with different Co/Ce molar ratios are synthesized by a citric acid method. Results show that the catalytic activity of Co–Ce catalysts is obviously superior to those of monometallic counterparts. Especially, Co0.75Ce0.25Ox catalyst simultaneously realizes highly efficient toluene conversion (with a decomposition efficiency of 98.5% and a carbon balance of 97.8%) and a large energy efficiency of 7.12 g kW h−1, among the best performance in the state-of-art literature (0.42 to 6.11 g kW h−1). The superior catalytic performance is further interpreted by the synergistic effect between Co and Ce species and the significant plasma–catalyst interaction. Specifically, the synergistic effect can decrease the catalyst crystallite size, enlarge the specific surface area and improve the amount of oxygen vacancies/mobility, providing more active sites for the adsorption of surface active oxygen species. Meanwhile, the plasma–catalyst interaction is able to generate the surface discharge and reinforce the electric field strength, thereby accelerating the plasma-catalytic reactions. In the end, the plasma-catalytic reaction mechanism and pathways of toluene conversion are demonstrated.