The structure, fluid-dynamic behavior, temperature, and radiation emission of a cold atmospheric pressure plasma jet driven by high-voltage pulses with rise time and duration of a few nanoseconds have been investigated. Intensified charge-coupled device (iCCD) imaging revealed that the discharge starts when voltage values of 5-10 kV are reached on the rising front of the applied voltage pulse; the discharge then propagates downstream the source outlet with a velocity around 10 ⁷ -10 ⁸ cm/s. Light emission was observed to increase and decrease periodically and repetitively during discharge propagation. The structure of the plasma plume presents a single front or either several branched subfronts, depending on the operating conditions; merging results of investigations by means of Schlieren and iCCD imaging suggests that branching of the discharge front occurs in spatial regions where the flow is turbulent. By means of optical emission spectroscopy, discharge emission was observed in the ultraviolet-visible (UV-VIS) spectral range (N ₂ , N ₂ ⁺ , OH, and NO emission bands); total UV irradiance was lower than 1 μW/cm2 even at short distances from the device outlet (<;15 mm). Plasma plume temperature does not exceed 45 °C for all the tested operating conditions and values close to ambient temperature were measured around 10 mm downstream the source outlet.

The transferred arc plasma torch device consists of two electrodes generating a plasma arc sustained by means of an electric current flowing through the body of the discharge. Modelling works investigating transferred electric arc discharges generated between two suspended metallic electrodes, in the so-called twin torch configuration, are scarce. The discharge generated by this particular plasma source configuration is characterized by a complex shape and fluid dynamics and needs a 3D description in order to be realistically predicted. The extended discharge length that goes from the tungsten pencil cathode to the flat copper anode without any particular confinement wall and the fluid dynamics and magnetic forces acting on the arc may induce an unsteady behaviour. In order to capture the dynamic behaviour of a twin torch discharge, a 3D time-dependent plasma arc model has been developed using a customized commercial code FLUENT form in both local thermodynamic equilibrium (LTE) and non-LTE. A two temperature (2T) model has been developed taking into account only the thermal non-equilibrium effects in argon plasma. The main differences between LTE and 2T models' results concern the increased extension of the horizontal section of the discharge and the predicted reduced (of about 60–80 V) voltage drop between the electrodes when using a 2T model.

The present work aims to investigate the interaction between a plasma jet and targets with different physical properties. Electrical, morphological and fluid-dynamic characterizations were performed on a plasma jet impinging on metal, dielectric and liquid substrates by means of Intensified Charge-Coupled Device (ICCD) and high-speed Schlieren imaging techniques. The results highlight how the light emission of the discharge, its time behavior and morphology, and the plasma-induced turbulence in the flow are affected by the nature of the target. Surprisingly, the liquid target induces the formation of turbulent fronts in the gas flow similar to the metal target, although the dissipated power in the former case is lower than in the latter. On the other hand, the propagation velocity of the turbulent front is independent of the target nature and it is affected only by the working gas flow rate.