In this article, an adaptive finite-time fault-tolerant control (FTC) strategy is proposed for state tracking of uncertain systems subject to actuator faults and input saturation. The actuator faults, which include multiplicative and time-varying additive modes, are allowed to be unknown. To deal with the coupling of the unknown model uncertainties and the actuator faults, an adaptive mechanism is designed based on a wisely chosen Lyapunov function. The proposed finite-time FTC scheme, with adaptive laws of uncertain parameters, guarantees the stability of the closed-loop system, and the practical finite-time state tracking property. Then, the algorithm is applied to a flight control system, simulation and comparison results demonstrate the effectiveness and advantages of the designed control scheme.
In this paper, a robust finite-time fault-tolerant control (FTC) scheme is developed for uncertain linear systems in the presence of actuator faults. Since the system uncertainties and actuator faults are unknown, the controller parameters are updated online by the adaptive laws without the need for fault detection and isolation. It is proved that the proposed state-feedback model reference adaptive finite-time FTC scheme can guarantee that the tracking error converges to a small neighborhood of the origin in finite time. An application example for an aircraft lateral-directional dynamic system is presented to show the effectiveness of the proposed control scheme.
14 June 2023 in IEEE Transactions on Fuzzy Systems
This paper proposes an adaptive fuzzy decentralized output feedback control scheme for large-scale systems with multichannel asynchronous event-triggering. Uncertain system dynamics, unknown interconnections and time-varying sensor faults are handled simultaneously, even though only the corrupted measured local output is available for the design procedure. First, local state estimation filters are designed to estimate the unmeasured states. Then, considering that the resource-limited communication and computation may exist in all three types of channels including state estimation filter-to-controller channel, parameter estimator-to-controller channel and controller-to-actuator channel, an asynchronous event-triggering framework with time-varying triggering threshold is developed for multiple channels to release the communication and computation burden. Compared with the existing synchronous triggering mechanism, the proposed asynchronous one has several advantages: 1) the redundant signal transmission is reduced, 2) the triggering conditions for different channels are uncorrelated, which enables the designer to adjust the signal transmission frequency of each channel independently, and 3) the robustness could be improved in the face of noise as ideal synchronous triggering is not easy to be achieved in practice. In addition, both gain and bias faults, which are allowed to be unknown and time-varying, are covered in a unified sensor fault model. It is proved that, with the proposed control scheme, all the closed-loop signals are semi-globally uniformly ultimately bounded and the output tracking error converges into an adjustable residual set without Zeno behavior. Finally, simulation and comparison results illustrate the effectiveness and advantages of the proposed control scheme.
In this paper, an adaptive finite-time fault-tolerant tracking control scheme is proposed for linear systems in the presence of actuator faults. The faults including outage, loss of effectiveness and time-varying bias are all taken into consideration. For those uncertain and varying faults, an adaptive mechanism is designed which promises the desired stability and practical finite-time state tracking properties. The simulation results on an application to an aircraft system illustrate the efficiency of the theoretical results.