The ongoing shift from an industrial to a digital economy is a significant global phenomenon. However, the driving forces behind and the tactical approach to digital transformation are still unclear to the construction industry, thereby posing challenges for construction enterprises seeking to undergo digital transformation. Therefore, this paper conducted an investigation on the subject, including the following: (1) the 17 influencing factors in the complex system of digital transformation of construction enterprises were screened and summarized from four perspectives: Environment, Technology, Organisation, and Resources. The attributes of the influencing factors were analyzed using the Decision-Making Experimentation and Evaluation Laboratory (DEMATEL) method, and the key factors were identified. (2) The Total Adversarial Interpretive Structure Model (TAISM) method was used to develop a multi-perspective adversarial recursive structure model with integrated impact values, which reflected the interrelationships between the influencing factors and the hierarchical structure. (3) Based on the analysis of the influencing factors of digital transformation of construction enterprises, the clear path mechanisms were elucidated and suggested measures from the internal and external perspectives of government and construction firms were recommended. The results can offer theoretical backing and serve as a stepping stone for the digital transformation of the construction industry.
The joints and fissures in a natural rock mass can affect the mechanical properties of the rock mass, the propagation of a blasting stress wave, and the blasting effect of the smooth surface of roadways. In the process of roadway drilling and blasting, there will inevitably be some joints between the two blast holes. Taking the joint angle as the starting point, this paper studies the rule of rock explosion crack propagation and stress variation when there are joints with different angles between two blast holes and analyzes the influence of joints on rock mechanical properties and blasting effects. The numerical simulation method and the software ANSYS/LS-DYNA are used to establish 7 rock mass models with various joint angles. When there is no joint between two holes and joints of 15°, 30°, 45°, 60°, 75°, and 90°, the propagation of explosive cracks and stress variations in the rock mass are discussed. The results show that the joints at different angles have obvious guiding and blocking effects on the propagation of explosive cracks, and as joint angles increase, the guiding effect becomes more apparent and the blocking effect becomes weaker. The effective stress of the rock mass will vary depending on the angles of the joints between the hole and the joint. As the joint angle increases, the joint’s influence on the reflection and superposition of stress waves gradually weakens, and the peak value of the effective stress of the rock mass gradually decreases. The peak effective stress of the rock mass on the blasting side of the joint is similarly impacted by the superposition of stress waves, and the extreme value may be seen at the critical node of each change curve. The explosive crack will break through at the critical location because the maximal effective stress of the rock mass is distributed in a “W” form on the blasting side of the joint.
With the decrease and depletion of shallow coal resources, the depth of mining is increasing. The mechanism of high crustal stress blasting is not clear, and the effect of crustal stress on blasting effect is obvious. The law of the differential detonation is similar without crustal stress. The crustal stress of rock masses increases linearly with the increase in excavation depth, and the influence of crustal stress on blasting effect is great. In order to study the rock-breaking process of complex differential blasting under deep high crustal stress, the instantaneous detonation of each model and the priority detonation of the central hole are numerically simulated. The evolution law of the blasting crack and the method of optimizing blasting effect by differential blasting and increasing the aperture of the priority detonation hole under high crustal stress are put forward. The authors proposed a study on the 2D optimization simulation of complex five-hole cutting blasting under different lateral pressure coefficients of 400 m and 800 m with software ANSYS/LS-DYNA and analyzed the evolution rules of blasting cracks and lateral pressure coefficients. The results show that setting delayed detonation and hole diameter and optimizing blasthole spacing can optimize the rock-breaking effect under high crustal stress and different lateral pressure coefficients.
Placing empty holes between charging holes is widely used in blasting engineering to achieve directional fracture blasting. Studies have shown that the presence of a notch along the empty hole wall enhances stress concentration and supports improved control over crack propagation. The notch angle and length are the two main parameters influencing the impact of notch holes. Therefore, in this study, we used numerical simulations to investigate how varying notch angles and lengths influence the directional fracture blasting effect. The findings suggest that, among the different types of holes used in directional fracture rock blasting, notched empty holes have the most significant guiding effect, followed by empty holes, while the absence of empty holes yields the least effective results. In the directional fracture blasting of a notched empty hole, stress concentration occurs at the notch tip following the explosion. This alters the stress field distribution around the empty hole, which shifts from a compressive to a tangential tensile state. Additionally, this concentration of stress causes the explosion energy to be focused on that location, resulting in a directional fracture blasting effect. In blasting construction, selecting the appropriate notch hole parameters is necessary to achieve optimal effects and reduce damage to surrounding rocks. Based on the notch parameters assessed in this study, the optimal effect of directional fracture blasting is achieved when the notch angle is 30°.
The comprehensive evaluation of cut blasting constitutes a multi-objective decision-making problem in underground rock engineering. When the differences among alternative blast design schemes are marginal, it is essential to account for the boundary fuzziness and mutual interactions of the various evaluation indicators to support the comparative selection of blasting schemes. This study developed an entropy-weighted optimized matter-element cloud (EW-OMEC) model based on an adaptive cloud-parameter calculation method. Three main criteria and twelve key evaluation indicators were selected to construct the blasting effect evaluation system. Damage volume derived from numerical simulations was introduced as an evaluation indicator and analyzed jointly with field-measured data. The proposed model was applied to the roadway blasting evaluation in the Liyan Coal Mine. The results show that the EW-OMEC model can effectively characterize boundary fuzziness among adjacent evaluation grades. Blasthole utilization ratio and block size distribution are the two largest indicator weights of the six schemes, corresponding to six field blasting trials. The entropy weights of blasting quality, economic benefits and adverse effects of blasting are 44.72%, 24.84% and 30.44%, respectively. According to the principle of maximum correlation degree, scheme P6 with subdrilling depths of 0.35 m for both the cut holes and the empty holes obtained the highest comprehensive evaluation among the six schemes. Further field applications under independent engineering conditions are required to assess the broader applicability of the proposed method.