Dye and nitro-compound pollution has become a significant issue worldwide. The adsorption and degradation of dyes and nitro-compounds have recently become important areas of study. Different methods, such as precipitation, flocculation, ultra-filtration, ion exchange, coagulation, and electro-catalytic degradation have been adopted for the adsorption and degradation of these organic pollutants. Apart from these methods, adsorption, photocatalytic degradation, and chemical degradation are considered the most economical and efficient to control water pollution from dyes and nitro-compounds. In this review, different kinds of dyes and nitro-compounds, and their adverse effects on aquatic organisms and human beings, were summarized in depth. This review article covers the comprehensive analysis of the adsorption of dyes over different materials (porous polymer, carbon-based materials, clay-based materials, layer double hydroxides, metal-organic frameworks, and biosorbents). The mechanism and kinetics of dye adsorption were the central parts of this study. The structures of all the materials mentioned above were discussed, along with their main functional groups responsible for dye adsorption. Removal and degradation methods, such as adsorption, photocatalytic degradation, and chemical degradation of dyes and nitro-compounds were also the main aim of this review article, as well as the materials used for such degradation. The mechanisms of photocatalytic and chemical degradation were also explained comprehensively. Different factors responsible for adsorption, photocatalytic degradation, and chemical degradation were also highlighted. Advantages and disadvantages, as well as economic cost, were also discussed briefly. This review will be beneficial for the reader as it covers all aspects of dye adsorption and the degradation of dyes and nitro-compounds. Future aspects and shortcomings were also part of this review article. There are several review articles on all these topics, but such a comprehensive study has not been performed so far in the literature.

Sugarcane (Saccharum officinarum) bagasse (SCB) is one of the most widely produced lignocellulosic biomasses and has great potential to be recycled for sustainable food production as ruminant animal feed. However, due to severe lignification, i.e., lignin-(hemi)-cellulose complexes, ruminants can only ferment a minor fraction of the polysaccharides trapped in such recalcitrant lignocellulosic biomasses. This study was therefore designed to systematically evaluate the improvement in nutritional value, the in vitro dry matter digestibility (IVDMD), and the rate and extent of in vitro total gas (IVGP) and methane (CH₄) production during the 72 h in vitro ruminal fermentation of SCB, bioprocessed with Agaricus bisporus, Pleurotus djamor, Calocybe indica and Pleurotus ostreatus under solid-state fermentation (SSF) for 0, 21 and 56 days. The contents of neutral detergent fiber, lignin, hemicellulose and CH₄ production (% of IVGP) decreased (p < 0.05), whereas crude protein (CP), IVDMD and total IVGP increased (p < 0.05) after the treatment of SCB for 21 and 56 days with all white-rot fungi (WRF) species. The greatest (p < 0.05) improvement in CP (104.1%), IVDMD (38.8%) and IVGP (49.24%) and the greatest (p < 0.05) reduction in lignin (49.3%) and CH₄ (23.2%) fractions in total IVGP were recorded for SCB treated with C. indica for 56 days. Notably, C. indica degraded more than (p < 0.05) lignin and caused greater (p < 0.05) improvement in IVDMD than those recorded for other WRF species after 56 days. The increase in IVGP was strongly associated with lignin degradation (R² = 0.72) and a decrease in the lignin-to-cellulose ratio (R² = 0.95) during the bioprocessing of SCB. Our results demonstrated that treatment of SCB with (selective) lignin-degrading WRF can improve the nutritional value and digestibility of SCB, and C. indica presents excellent prospects for the rapid, selective and more extensive degradation of lignin and, as such, for the improvement in nutritional value and digestibility of SCB for ruminant nutrition.

In this study, the effects of epiphytic microbiota from different forages on the fermentation characteristics and microbial community structure of forage sorghum silage were investigated. The gamma irradiated sterilized forage sorghum was treated through sterile water, epiphytic microbiota of forage sorghum (FSm), Sudan grass (SDm), Napier grass (NPm), and maize (MZm). NPm and SDm inoculated silages showed similar pH value and lactic acid (LA) and acetic acid (AA) contents at day 3 and 60 of ensiling. The final silage of FSm and MZm showed lower (p < 0.05) pH and AA content and a higher LA content compared to the NPm and SDm silages. Bacterial species from the Weisella genus were predominantly present in FSm, NPm, and SDm, while Lactococcus dominated the MZm silage during early ensiling. Lactobacillus was predominant in all inoculated terminal silages. Overall, the four inoculated microbiota decreased the pH value of silage and were dominated by lactic acid bacteria (LAB); however, the NPm and SDm treatments resulted in comparatively higher AA contents which could have an inhibitory effect on the secondary fermentation developed by the yeast and enhanced the aerobic stability of forage sorghum silage.

This study aimed to assess the fermentation characteristics, bacterial community structure, co-occurrence networks, and their predicted functionality and pathogenic risk in high-moisture Italian ryegrass (IR; Lolium multiflorum Lam.) silage. The IR harvested at heading stage (208 g dry matter (DM)/kg fresh weight) was spontaneously ensiled in plastic silos (10 L scale). Triplicated silos were opened after 1, 3, 7, 15, 30, and 60 days of fermentation, respectively. The bacterial community structure on days 3 and 60 were investigated using high-throughput sequencing technology, and 16S rRNA-gene predicted functionality and phenotypes were determined by PICRUSt2 and BugBase tools, respectively. After 60 days, the IR silage exhibited good ensiling characteristics indicated by large amounts of acetic acid (~58.7 g/kg DM) and lactic acid (~91.5 g/kg DM), relatively low pH (~4.20), acceptable levels of ammonia nitrogen (~87.0 g/kg total nitrogen), and trace amounts of butyric acid (~1.59 g/kg DM). Psychrobacter was prevalent in fresh IR, and Lactobacillus became the most predominant genus after 3 and 60 days. The ensilage process reduced the complexity of the bacterial community networks in IR silage. The bacterial functional pathways in fresh and ensilaged IR are primarily characterized by the metabolism of carbohydrate and amino acid. The pyruvate kinase and 1-phosphofructokinase were critical in promoting lactic acid fermentation. A greater (p < 0.01) abundance of the “potentially pathogenic” label was noticed in the bacterial communities of ensiled IR than fresh IR. Altogether, the findings indicated that the high-moisture IR silage exhibited good ensiling characteristics, but the potential for microbial contamination and pathogens still remained after ensiling.