Self-modulation is a beam–plasma instability that is useful to drive large-amplitude wakefields with bunches much longer than the plasma skin depth. We present experimental results showing that, when increasing the ratio between the initial transverse size of the bunch and the plasma skin depth, the instability occurs later along the bunch, or not at all, over a fixed plasma length because the amplitude of the initial wakefields decreases. We show cases for which self-modulation does not develop, and we introduce a simple model discussing the conditions for which it would not occur after any plasma length. Changing bunch size and plasma electron density also changes the growth rate of the instability. We discuss the impact of these results on the design of a particle accelerator based on the self-modulation instability seeded by a relativistic ionization front, such as the future upgrade of the Advanced WAKefield Experiment.
The Large Hadron Collider (LHC) stores two high-energy counter-rotating particle beams consisting of multiple bunches of a nanosecond length. Precise knowledge of the number of particles within each bunch, known as the bunch intensity, is crucial for physicists and accelerator operators. From the very beginning of the LHC operation, bunch intensity was measured by four commercial fast beam current transformers (FBCTs) coupling to the beam current. However, the FBCTs exhibited several shortcomings which degraded the measurement accuracy below the required level. A new sensor, the wall current transformer (WCT), has been developed to overcome the FBCT limitations. The WCT consists of eight small radio frequency (RF) current transformers distributed radially around the accelerator’s vacuum chamber. Each transformer couples to a fraction of the image current induced on the vacuum chamber by the passing particle beam. A network of RF combiners sums the outputs of all transformers to produce a single signal which, after integration, is proportional to the bunch intensity. In laboratory tests and during beam measurements, the WCT performance was demonstrated to convincingly exceed that of the FBCT. All originally installed FBCTs were replaced by four WCTs, which have been serving as the LHC reference bunch intensity sensors since 2016.
We exploit the coherent emission of Cherenkov diffraction radiation (ChDR) by a relativistic electron beam to sense its position even in the presence of other particle beams. ChDR is produced in alumina inserts embedded in the vacuum chamber walls and recorded in a narrow band centered at 30 GHz. This nontrivial solution has been implemented for plasma wakefield accelerators, where the electron beam to be sensed can copropagate with another high-energy proton beam that generates the plasma wakefield. In addition, at variance with most existing position detectors, this method is insensitive to spurious electric charges due to the presence of plasma. We present the overall design of the detector as well as experimental results obtained in the AWAKE facility at CERN. Published by the American Physical Society 2024
Precise measurements of electrostatic fields in harsh environments are required in fields ranging from particle accelerators to industrial installations. Many techniques disrupt the field distribution due to the presence of conductors. We present a fully dielectric sensor for very harsh environmental conditions, that exploits the Pockels effect manifested by electro-optic crystals. This system is designed to allow DC measurements to be performed in the frequency domain. The paper discusses an analytical model and simulations of the system, validated with experimental results. The working principle of the measurement technique is explained in detail along the known limitations and possible solutions to further increase the performance.