The search for renewable energy sources has become challenging in the current era, as conventional fuel sources are of finite origins. Recent research interest has focused on various biophotovoltaic (BPV) platforms utilizing algae, which are then used to harvest solar energy and generate electrical power. The majority of BPV platforms incorporate indium tin oxide (ITO) anodes for the purpose of charge transfer due to its inherent optical and electrical properties. However, other materials such as reduced graphene oxide (RGO) could provide higher efficiency due to their intrinsic electrical properties and biological compatibility. In this work, the performance of algae biofilms grown on RGO and ITO anodes were measured and discussed. Results indicate improved peak power of 0.1481[emsp14]mWm-2 using the RGO electrode and an increase in efficiency of 119%, illustrating the potential of RGO as an anode material for applications in biofilm derived devices and systems.

The utilization of toxic chemicals as reducing and stabilizing agents in the preparation of gold nanoparticles (AuNPs) has increased in vivo toxicity and thus limited its application in clinical settings. Herein, we propose an alternative method of preparing highly stable AuNPs, where non-toxic Curcuma mangga (CM) extract was used as a single reducing and stabilizing agent to overcome the aforementioned constraints. The morphological images enunciated that the homogeneously dispersed AuNPs exhibited spherical morphology with an average particle diameter of 15.6 nm. Fourier Transform infrared (FTIR) and cyclic voltammetry analysis demonstrated that carbonyl groups of terpenoids in CM extract played an important role in the formation and stabilization of AuNPs. Green-synthesized AuNPs were found to have good stability in physiological media after 24 h of dispersion. The AuNPs were also cytocompatible with human colon fibroblast cell (CCD-18Co) and human lung fibroblast cell (MRC-5). Hemocompatibility tests revealed that the AuNPs were blood-compatible, with less than 10% of hemolysis without any aggregation of erythrocytes. The current study suggests potential in employing a CM-extract-based method in the preparation of AuNPs for anticancer diagnosis and therapy.

Conventional three-electrode systems used in electrochemical measurement demand time-consuming and maintenance intensive procedures to enable accurate and repeatable electrochemical measurements.

Many types of materials such as inorganic semiconductors have been employed as detectors for nuclear radiation, the importance of which has increased significantly due to recent nuclear catastrophes. Despite the many advantages of this type of materials, the ability to measure direct cellular or biological responses to radiation might improve detector sensitivity. In this context, semiconducting organic materials such as deoxyribonucleic acid or DNA have been studied in recent years. This was established by studying the varying electronic properties of DNA-metal or semiconductor junctions when exposed to radiation. In this work, we investigated the electronics of aluminium (Al)/DNA/silicon (Si) rectifying junctions using their current-voltage (I-V) characteristics when exposed to alpha radiation. Diode parameters such as ideality factor, barrier height and series resistance were determined for different irradiation times. The observed results show significant changes with exposure time or total dosage received. An increased deviation from ideal diode conditions (7.2 to 18.0) was observed when they were bombarded with alpha particles for up to 40 min. Using the conventional technique, barrier height values were observed to generally increase after 2, 6, 10, 20 and 30 min of radiation. The same trend was seen in the values of the series resistance (0.5889–1.423 Ω for 2–8 min). These changes in the electronic properties of the DNA/Si junctions could therefore be utilized in the construction of sensitive alpha particle detectors.