This article illustrates the University of L'Aquila model 4 (UAQ4) Italian maglev train, a transportation system with zero motion resistance (except aerodynamic drag) and greatly reduced energy consumption, approaching zero at a low constant speed. The project is the result of more than 40 years of research in the field of nonconventional highspeed transportation systems. Its technological feasibility has been tested in the laboratory at the University of L'Aquila, Italy.
1 February 2020 in International Journal of Hydrogen Energy
It is now recognized that high-temperature superconducting (HTS) technology has a significant potential for future magnetic levitation (Maglev) transit system applications due to the advantages of self-stable levitation, being free of electric power and magnetic drag to the vehicle motion, and system simplicity. This article provides a characterization method of the experimental transport system Maglev levitation module developed at the University of L’Aquila (Italy). More specifically, the lifting and guiding behavior of a single V-shaped Maglev module, which is unique for this type of application, is analyzed and tested. Its working principle is based on the interaction between HTS “skate” onboard of the vehicle and the magnetic field generated by the permanent magnets distributed on the guideway (PMG). A single scaled levitation module was built and tested under quasi-static conditions using dedicated measuring equipment by varying system parameters such as vertical gap, lateral offset, and field cooling height. The latter determines the amount of interacting magnetic field that is trapped in the HTS core during its transition from the resistive to the superconducting state and which, in turn, interacts with the field generated by the PMG to create the suspension phenomenon. The Maglev module’s dual behavior due to the double phenomenon of repulsion and attraction has been verified and tested in terms of vertical and lateral forces by varying system parameters. The dual “push and pull” force allows the phenomenon of vehicle driving to be enhanced.
This paper presents the design and application of hybrid power train for city bus with zero greenhouse emissions and high work efficiency. The vehicle system configuration is based on two separately electric driven wheels powered by an hybrid unit composed by a hydrogen fuel cell and flywheel energy storage system. Numerical models were built to simulate the powertrain components and to downsize the fuel cell power satisfying the transient loads by the flywheel energy storage device. A simulation of the city bus (15 passengers of carrying capacity) was run over the European urban standard drive cycle in order to size the powertrain components. Finally the hydrogen production by water electrolysis was considered and consumption and CO 2 emission per bus were estimated.
1 November 2016 in IET Intelligent Transport Systems
This study presents an analysis of a hydrogen‐fuelled city bus with ‘zero’ emission solar–hydrogen cycle. The study considers an electric vehicle based on four separately powered wheels, connected to a hybrid unit composed by a hydrogen fuel cell and a high‐speed kinetic energy storage system. A bus with 21 passengers carrying capacity is simulated to run along urban drive cycles with different slopes. Vehicle power‐train components are designed. The balance between the energy consumption for a yearly bus travel and the energy production by means of photovoltaic panels is performed for three different Italian locations and the results are also discussed in terms of CO 2 emissions.
21 August 2023 in Zeitschrift für angewandte Mathematik und Physik