This review is dedicated to the potential use of natural zeolites for wastewater treatment and carbon dioxide capture. Zeolites, due to their microporous structure and high surface activity, are used as sorbents. One effective application of zeolites is in wastewater treatment, which leads to the removal of pollutants and improvement in water quality. Zeolites can also be used for carbon dioxide capture, which helps reduce its concentration in the atmosphere and addresses climate change issues. This review examines recent research on the use of natural zeolites for the removal of heavy metals from water and CO2 capture. It explores the broad applications of natural zeolites by understanding their adsorption capabilities and the mechanisms affecting their performance in water purification from heavy metals and CO2 capture.
16 April 2020 in Russian Journal of Physical Chemistry A
Cobalt-containing catalysts are studied via BET, XRD, SEM, and TPR-H2. Their activity in the reaction of carbon dioxide methane conversion and the process of Fischer–Tropsch synthesis is studied. It was shown that unlike impregnation, preparing Co/γ-Al2O3 via solution combustion increases the dispersibility of the active phase of the catalyst and facilitates the reduction of cobalt oxide, which enhances the activity of the catalyst.
This study presents a comparative analysis of the CO2 sorption properties of natural zeolites sourced from the Tayzhuzgen (Tg) and Shankanay (Sh) deposits in Kazakhstan. The Tayzhuzgen zeolite was characterized by a Si/Al ratio of 5.6, suggesting partial dealumination, and demonstrated enhanced specific surface area following mechanical activation. Modification of the Tayzhuzgen zeolite with magnesium oxide significantly improved its CO2 sorption capacity, reaching 8.46 mmol CO2/g, attributed to the formation of the CaMg(Si2O6) phase and the resulting increase in basic active sites. TPD-CO2 analysis confirmed that MgO/Tg exhibited the highest basicity of the modified samples, further validating its potential for CO2 capture applications.
Физико-химические характеристики природных цеолитов Тайжузгенского и Шанканайского месторождения исследованы методами БЭТ, СЭМ, РФА и ИК-Фурье спектроскопией. Сорбционные свойства природных цеолитов по диоксиду углерода исследованы в проточном режиме в интервале температур 50-300 °С. Среди исследованных образцов наиболее активным в процессе улавливания СО2 оказался природный цеолит Тайжузгенского месторождения, при температуре 300 °С адсорбционная емкость по углекислому газу составила 27,4%. Высокая адсорбционная емкость по СО2 природного цеолита Тайжузгенского месторождения обусловлена его удельной поверхностью и высоким соотношением Si/Al.