Dwiwahju Sasongko

Prof. Dwiwahju Sasongko


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 August 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
Wibawa Hendra SaputeraWibawa Hendra Saputera
Wibawa Hendra Saputera
Amellia PutrieAmellia Putrie
Amellia Putrie
AEAli Asghar Esmailpour
Ali Asghar Esmailpour
DSDwiwahju Sasongko
Dwiwahju Sasongko
VSVeinardi Suendo
Veinardi Suendo
RMRino R. Mukti
Rino R. Mukti
Phenol acts as a pollutant even at very low concentrations in water. It is classified as one of the main priority pollutants that need to be treated before being discharged into the environment. If phenolic-based compounds are discharged into the environment without any treatments, they pose serious health risks to humans, animals, and aquatic systems. This review emphasizes the development of advanced technologies for phenol removal. Several technologies have been developed to remove phenol to prevent environmental pollution, such as biological treatment, conventional technologies, and advanced technologies. Among these technologies, heterogeneous catalytic ozonation has received great attention as an effective, environmentally friendly, and sustainable process for the degradation of phenolic-based compounds, which can overcome some of the disadvantages of other technologies. Recently, zeolites have been widely used as one of the most promising catalysts in the heterogeneous catalytic ozonation process to degrade phenol and its derivatives because they provide a large specific surface area, high active site density, and excellent shape-selective properties as a catalyst. Rational design of zeolite-based catalysts with various synthesis methods and pre-defined physiochemical properties including framework, ratio of silica to alumina (SiO2/Al2O3), specific surface area, size, and porosity, must be considered to understand the reaction mechanism of phenol removal. Ultimately, recommendations for future research related to the application of catalytic ozonation technology using a zeolite-based catalyst for phenol removal are also described.

26 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
Wibawa Hendra SaputeraWibawa Hendra Saputera
Wibawa Hendra Saputera
Aryan Fathoni AmriAryan Fathoni Amri
Aryan Fathoni Amri
RDRahman Daiyan
Rahman Daiyan
DSDwiwahju Sasongko
Dwiwahju Sasongko
The palm oil industry produces liquid waste called POME (palm oil mill effluent). POME is stated as one of the wastes that are difficult to handle because of its large production and ineffective treatment. It will disturb the ecosystem with a high organic matter content if the waste is disposed directly into the environment. The authorities have established policies and regulations in the POME waste quality standard before being discharged into the environment. However, at this time, there are still many factories in Indonesia that have not been able to meet the standard of POME waste disposal with the existing treatment technology. Currently, the POME treatment system is still using a conventional system known as an open pond system. Although this process can reduce pollutants’ concentration, it will produce much sludge, requiring a large pond area and a long processing time. To overcome the inability of the conventional system to process POME is believed to be a challenge. Extensive effort is being invested in developing alternative technologies for the POME waste treatment to reduce POME waste safely. Several technologies have been studied, such as anaerobic processes, membrane technology, advanced oxidation processes (AOPs), membrane technology, adsorption, steam reforming, and coagulation. Among other things, an AOP, namely photocatalytic technology, has the potential to treat POME waste. This paper provides information on the feasibility of photocatalytic technology for treating POME waste. Although there are some challenges in this technology’s large-scale application, this paper proposes several strategies and directions to overcome these challenges.

26 August 2022 in Molecules
Verified
Journal Article
Open access
PDF file
GYGita Yuniar
Gita Yuniar
Wibawa Hendra SaputeraWibawa Hendra Saputera
Wibawa Hendra Saputera
DSDwiwahju Sasongko
Dwiwahju Sasongko
RMRino R. Mukti
Rino R. Mukti
JRJenny Rizkiana
Jenny Rizkiana
HDHary Devianto
Hary Devianto
Methane is one of the promising alternatives to non-renewable petroleum resources since it can be transformed into added-value hydrocarbon feedstocks through suitable reactions. The conversion of methane to methanol with a higher chemical value has recently attracted much attention. The selective oxidation of methane to methanol is often considered a “holy grail” reaction in catalysis. However, methanol production through the thermal catalytic process is thermodynamically and economically unfavorable due to its high energy consumption, low catalyst stability, and complex reactor maintenance. Photocatalytic technology offers great potential to carry out unfavorable reactions under mild conditions. Many in-depth studies have been carried out on the photocatalytic conversion of methane to methanol. This review will comprehensively provide recent progress in the photocatalytic oxidation of methane to methanol based on materials and engineering perspectives. Several aspects are considered, such as the type of semiconductor-based photocatalyst (tungsten, titania, zinc, etc.), structure modification of photocatalyst (doping, heterojunction, surface modification, crystal facet re-arrangement, and electron scavenger), factors affecting the reaction process (physiochemical characteristic of photocatalyst, operational condition, and reactor configuration), and briefly proposed reaction mechanism. Analysis of existing challenges and recommendations for the future development of photocatalytic technology for methane to methanol conversion is also highlighted.

15 October 2021 in Molecules
Verified
Journal Article
Open access
PDF file
Wibawa Hendra SaputeraWibawa Hendra Saputera
Wibawa Hendra Saputera
Aryan Fathoni AmriAryan Fathoni Amri
Aryan Fathoni Amri
RMRino R. Mukti
Rino R. Mukti
VSVeinardi Suendo
Veinardi Suendo
HDHary Devianto
Hary Devianto
DSDwiwahju Sasongko
Dwiwahju Sasongko
Disposal of palm oil mill effluent (POME), which is highly polluting from the palm oil industry, needs to be handled properly to minimize the harmful impact on the surrounding environment. Photocatalytic technology is one of the advanced technologies that can be developed due to its low operating costs, as well as being sustainable, renewable, and environmentally friendly. This paper reports on the photocatalytic degradation of palm oil mill effluent (POME) using a BiVO4 photocatalyst under UV-visible light irradiation. BiVO4 photocatalysts were synthesized via sol-gel method and their physical and chemical properties were characterized using several characterization tools including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), surface area analysis using the BET method, Raman spectroscopy, electron paramagnetic resonance (EPR), and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS). The effect of calcination temperature on the properties and photocatalytic performance for POME degradation using BiVO4 photocatalyst was also studied. XRD characterization data show a phase transformation of BiVO4 from tetragonal to monoclinic phase at a temperature of 450 °C (BV-450). The defect site comprising of vanadium vacancy (Vv) was generated through calcination under air and maxima at the BV-450 sample and proposed as the origin of the highest reaction rate constant (k) of photocatalytic POME removal among various calcination temperature treatments with a k value of 1.04 × 10−3 min−1. These findings provide design guidelines to develop efficient BiVO4-based photocatalyst through defect engineering for potential scalable photocatalytic organic pollutant degradation.

22 December 2015 in Asia-Pacific Journal of Chemical Engineering
Verified
Journal Article
Closed access
PDF file
DSDwiwahju Sasongko
Dwiwahju Sasongko
NANugraha Yohannes Arifpin
Nugraha Yohannes Arifpin
CRCarolus Borromeus Rasrendra
Carolus Borromeus Rasrendra
AIAntonius Indarto
Antonius Indarto

11 May 2017 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
DSDwiwahju Sasongko
Dwiwahju Sasongko
CRCarolus Borromeus Rasrendra
Carolus Borromeus Rasrendra
AIAntonius Indarto
Antonius Indarto
Devolatilisation is the release of volatile compounds from coal matrix by thermal decomposition. During coal devolatilisation, fragmentation could occur due to pressure build-up of accumulated volatiles. A fragmentation model is necessary to ensure the safe operation of coal combustion and optimum process condition. In this study, the refinement of fragmentation model of coal devolatilisation was done. In order to obtain a comprehensive model, a fluidised bed combustion experiment was conducted using two Indonesian coals (Musi Banyuasin and Berau) and the results were then compared with the model simulation. Using a coal diameter of 0.8–17 mm at a combustion temperature of 850°C, it shows that the fragmentation probability and number of fragments could be affected by the coal particle diameter, convective pore diameter, and porosity. Predictions made by the developed model were close to the experimental fragmentation data, with an error range of less than 5.1%.