In this work, the effect of pretreatment conditions (10% H2/Ar flow rate 25 mL/min and 400 °C, 3 h or 600 °C, 17 h) on the catalytic performance of 1 wt.% Pd/γ-Al2O3 has been evaluated for hydrogenation of 2-methyl-3-butyn-2-ol in continuous-flow mode. Two palladium catalysts have been tested under different conditions of pressure and temperature and characterized using various physicochemical techniques. The catalytic performance of red(400 °C)-Pd/γ-Al2O3 and red(600 °C)-Pd/γ-Al2O3 are affected by the coexistence of several related factors like the competition between PdH and PdCx formation during the reaction, structure sensitivity, hydrogen spillover to the alumina support and presence or absence of Pd–Al species. High-temperature reduction leads to formation of Pd–Al species in addition to pure Pd. The Pd–Al species which reveal unique electronic properties by decreasing the Pdδ− surface concentration via electron transfer from Pd to Al, leading to a weaker Pd–Alkyl bonding, additionally assisted by the hydrogen spillover, are the sites of improved semi-hydrogenation of 2-methyl-3-butyn-2-ol towards 2-methyl-3-buten-2-ol (97%)—an important intermediate for vitamin A synthesis.
Active carbon supported nickel catalysts prepared with nickel(II) nitrate and nickel(II) chloride precursors after reduction at 673 or 1173 K were investigated in the aqueous phase hydrodechlorination of 1,1,2-trichloroethene (TCE). These nickel catalysts facilitate the purification of water via decomposing TCE, but their catalytic properties depend on the chemistry of the nickel precursor used for Ni/C synthesis and pretreatment conditions. The chemistry of precursor catalysts affects the particle size, which in turn is correlated with catalytic activity. We observed the highest activity for Ni/C with the largest nickel particles. The application of high temperature reduction of nickel precursors increases the activity and minimizes the differences between the catalytic properties of the samples prepared from different salts.