Cavitation is one of the important elements influencing the performance of sea water hydraulic axial piston pump. To understand the working performance of sea water hydraulic axial piston pump under cavitation effects, a fully dynamic numerical model was developed in this article, which has taken into account the fluid compressibility effect, dynamic processes of gaseous, vaporous, pseudo-cavitation and cavitation damage, and the simulation was conducted through a three-dimensional computational fluid dynamics code PumpLinx. The cavitation characteristics of the pump were presented with a set of working conditions, as well as the cavitation damage power, dynamic gas volume fraction and vapor volume fraction inside the intake, piston and port plate chamber. A test rig was developed to validate the computational fluid dynamics simulations for the case of sea water hydraulic axial piston pump. Comparisons between the measured and simulated instantaneous discharge pressure, average flow as well as the vibration characteristics under different extents of cavitation by varying the inlet pressure and rotational speed of the pump were presented.

Seawater axial piston pump is a critical power component in seawater fluid power system. As the properties of high bulk modulus and low viscosity of seawater, the pressure and vibration characteristics of the seawater axial piston pump will be getting poorer than the traditional oil pump. In this study, the pressure, flow, and vibration characteristics for a seawater axial piston pump are investigated. The three-dimensional computational fluid dynamics simulations for the port plate with non-grooved, U-shaped, and triangle-based pyramid silencing groove designs have been conducted over a range of operating conditions, which consider the fluid compressibility effect and cavitation damage. Measurements of pressure ripple and pump vibration are carried out at various loading conditions to verify the results of simulation. The experiment turned out that the well-designed port plate can mitigate both pressure ripples as well as vibrations of the pump. This research will lay the foundation for the further development of a low fluid noise seawater axial piston pump.

This paper proposes a scheme to control the low-frequency vibration of pipelines by using magneto-rheological (MR) vibration reduction technology. The state equation and the transfer function of the pipeline system are established, and its stability and the sinusoidal excitation response are analyzed. The prototype of MR damper is developed. The dynamic characteristics of MR damper are tested and the double-sigmoid model of MR damper is established. The two-state control, Proportion Integration Differentiation (PID) control and sliding-mode-variable-structure (SMVS) control methods of pipeline vibration using MR damper are analyzed comparatively, and the vibration control laws are deduced. The simulation analyses are carried out to predict the control effect of different pipeline vibration control algorithms. The verification tests through a semi-active measurement and control platform are carried out, and the feasibility and applicability of different pipeline vibration control strategies are analyzed. The test results show that the three kinds of pipeline vibration control methods based on MR damper can effectively control the pipeline vibration. Especially, SMVS control has the best vibration control effect, the pipeline amplitude drop and the acceleration drop can reach 22.31 dB and 16.34 dB respectively, while the amplitude attenuation rate and the acceleration attenuation rate can reach 92.34% and 84.77%, respectively.