In order to expand and improve the reachable workspace of planar parallel manipulators, a 2-DOF 5R parallel mechanism with a coaxial-driven layout is proposed. The configuration analysis and structural design are carried out, and the kinematic model is presented to conduct simulation analysis. The results indicate that the layout with the axes of the two driving devices overlapping has a larger workspace and a more compact structure. Meanwhile, a closed-loop PID control system is established to evaluate the accuracy of the proposed mechanism and analyse the kinematic error under different gain parameters. Simulation results indicate that the kinematic performance of the mechanism has improved. The control system is constructed based on using a motion control card as the primary control component and two servo motors as the drive device. Additionally, gain values are adjusted by the driver to reduce the deviation of the servo motors. Finally, the design of the prototype is deployed, and the experiment proved that the 2-DOF 5R planar parallel mechanism (PPM) with a coaxial-driven layout has the advantages of a large workspace, fast dynamic response, high stiffness, and easy control. The design of the 2-DOF 5R PPM solves the problem of single operation and high repeatability, which is increasingly utilized in the fields of electronics, food, daily chemicals, and pharmaceuticals.
3 July 2024 in Biomimetic Intelligence and Robotics
Wearing an exoskeleton, the human body constantly experiences mechanical loading. However, quantifying internal loads within the musculoskeletal system remains challenging, especially during unconstrained dynamic activities such as manual material handling. Currently, exoskeleton systems are commonly integrated with sensor technologies to gather data and assess performances. This is mainly performed to evaluate the physical exoskeletons, and cannot provide real-time feedback during the development phase. Firstly, a powered wearable elbow exoskeleton with variable stiffness is proposed. Through theoretical calculation, the power efficiency formula of exoskeleton is derived. Then, a human musculoskeletal model is built using the AnyBody Modeling System and coupled to the elbow exoskeleton. Under set experimental conditions, the simulation reveals that, when compared with the exoskeleton, the biceps and triceps muscle force parameters of the human model were reduced by 24% and 12%. The muscle activity was diminished by 28–31%, and muscle length shortened by about 6%, in comparison to the condition without the exoskeleton. Finally, through the muscle force experiment, it was verified that the power efficiency of the elbow exoskeleton in the real transport was about 18%. The project reduces costs in the development phase of the exoskeleton and can provide new insights into muscle function and sports biomechanics.