Mohammad Javad Dianat

Mr. Mohammad Javad Dianat


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 September 2022 in Water
Verified
Journal Article
Open access
PDF file
Parnian GhanbarizadehParnian Ghanbarizadeh
Parnian Ghanbarizadeh
MPMohammad Mehdi Parivazh
Mohammad Mehdi Parivazh
MAMohsen Abbasi
Mohsen Abbasi
Shahriar OsfouriShahriar Osfouri
Shahriar Osfouri
MDMohammad Javad Dianat
Mohammad Javad Dianat
Mohammad AkramiMohammad Akrami
Mohammad Akrami
One of the most advantageous methods for lowering water hardness is the use of low-cost adsorbents. In this research, the effectiveness of natural zeolite (clinoptilolite type), activated carbon, and activated alumina was evaluated. These adsorbents were sequentially modified by NaCl, HCl, and NaCl-HCL to improve their ability to adsorb. The contact time and the amount of adsorbent used in the adsorption process were investigated experimentally to determine their effects. The results indicated that the best contact time for hardness reduction was 90 min, and the best concentrations of adsorbents in drinking water for zeolite, activated carbon, and activated alumina were 40, 60, and 60 g/L, respectively. In addition, for groundwater, these figures were 60, 40, and 40 g/L, respectively. The greatest possible decreases in total hardness under the best conditions by natural zeolite, activated carbon, and activated alumina adsorbents were 93.07%, 30.76%, and 56.92%, respectively, for drinking water and 59.23%, 15.67 %, and 39.72% for groundwater. According to the results obtained from experiments, NaCl-modified zeolite, natural zeolite, and NaCl-HCl-modified activated carbon performed better in terms of parameter reduction. The equilibrium data were well fitted by the Langmuir isotherm model, whereas the kinetic data for the adsorption process were consistent with the pseudo-second-order model. The equilibrium study of the adsorption process by the Morris–Weber model revealed that both chemical and physical adsorption are involved.
1

17 February 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
TSTahereh Setayeshmanesh
Tahereh Setayeshmanesh
MPMohammad Mehdi Parivazh
Mohammad Mehdi Parivazh
MAMohsen Abbasi
Mohsen Abbasi
Shahriar OsfouriShahriar Osfouri
Shahriar Osfouri
MDMohammad Javad Dianat
Mohammad Javad Dianat
Mohammad AkramiMohammad Akrami
Mohammad Akrami
In this research, the influence of a variety of operational factors such as the temperature of the reaction, gas flow rate, concentration of NaCl, and the amount of Ca(OH)2 for reducing the environmental impacts of desalination reject brine using the calcium oxide-based modified Solvay process were investigated. For this purpose, response surface modeling (RSM) and central composite design (CCD) were applied. The significance of these factors and their interactions was assessed using an analysis of variance (ANOVA) technique with a 95% degree of certainty (p < 0.05). Optimal conditions for this process included: a temperature of 10 °C, a Ca(OH)2/NaCl concentration ratio of 0.36, and a gas flow rate of 800 mL/min. Under these conditions, the maximum sodium removal efficiency from the synthetic sodium chloride solution was 53.51%. Subsequently, by employing the real brine rejected from the desalination unit with a 63 g/L salinity level under optimal conditions, the removal rate of sodium up to 43% was achieved. To investigate the process’s kinetics of Na elimination, three different kinds of kinetics models were applied from zero to second order. R squared values of 0.9101, 0.915, and 0.9141 were obtained in this investigation for zero-, first-, and second-degree kinetic models, respectively, when synthetic reject saline reacted. In contrast, according to R squared’s results with utilizing real rejected brine, the results for the model of kinetics were: R squared = 0.9115, 0.9324, and 0.9532, correspondingly. As a result, the elimination of sodium from real reject brine is consistent with the second-order kinetic model. According to the findings, the calcium oxide-based modified Solvay method offers a great deal of promise for desalination of brine rejected from desalination units and reducing their environmental impacts. The primary benefit of this technology is producing a usable solid product (sodium bicarbonate) from sodium chloride in the brine solution.