In this work, a 2D pore pressure cohesive zone model is presented to simulate the hydraulic fracture propagation in naturally fractured formation, in which the fracturing process is governed by a bilinear cohesive zone model equipped with Coulomb's friction law and the fluid flow within the hydraulic fracture is described by the lubrication equation. In this model, fluid leak‐off into rock matrix is ignored and a fully explicit temporal integration scheme is adopted to overcome the convergence issue of conventional implicit scheme (eg, Newton‐Raphson method). The advantage of the proposed model is that it does not require any special crossing criterion to determine the interaction behavior when the hydraulic fracture hits the natural fracture. Implementation of the model was described in detail, and then, the model was verified with well‐known analytical solution of KGD problem and criteria of hydraulic fracture crossing natural fracture. The capability of the proposed model to capture the interaction behavior between hydraulic fracture and natural fracture was demonstrated by the good agreement of the modeling result and analytical solution. Several numerical cases were performed to investigate the impact of key factors on fracture network evolution during hydraulic fracturing treatment. Results show that fracture network is not only governed by the spatial distribution of natural fracture, but also greatly affected by the initial hydraulic aperture of natural fracture and in situ stress contrast.
1 January 2020 in Fluid Dynamics & Materials Processing
Existing “evaluation indicators” are selected and combined to build a model to support the optimization of shale gas horizontal wells. Towards this end, different “weighting methods”, including AHP and the so-called entropy method, are combined in the frame of the game theory. Using a relevant test case for the implementation of the model, it is shown that the horizontal section of the considered well is in the middle sweet spot area with good physical properties and fracturing ability. In comparison with the FSI (flow scanner Image) gas production profile, the new model seems to display better abilities for the optimization of horizontal wells.
17 October 2024 in Arabian Journal for Science and Engineering
Errors in in situ stresses narrow the mud-weight window and compromise wellbore stability and hydraulic fracture containment, yet remains the most poorly constrained stress component. Wellbore deformation relative to a known reference configuration can constrain the stresses, but conventional caliper and image logs measure borehole shape rather than the material displacement field required by the inversion; analytical inversion based on the Kirsch solution assumes a circular borehole in a homogeneous elastic medium. Finite element modeling offers a route beyond this restriction, but gradient-free optimizers require thousands of forward solves. We present INSIDE (IN Situ stress Inversion from wellbore DEformation), which couples a GPU-accelerated finite element forward model with L-BFGS-B optimization to recover the far-field stresses and from wellbore wall deformation. While the problem has only two unknowns and each finite-difference gradient requires only three forward solves, the iterative workflow is deliberately retained as a general nonlinear inversion path for stress-dependent constitutive models. The forward model reproduces the Kirsch solution with wall-displacement errors below 0.24%, while noise-free twin experiments recover both stresses with relative errors below 0.01%. Monte Carlo ensembles of 100 seeds per noise level give mean stress errors of 1.60% () and 2.18% () at 20% noise, converging within 4–6 iterations regardless of initial guess. Young’s modulus is the dominant error channel, with stress errors scaling nearly one-to-one with modulus uncertainty. This study deliberately focuses on a pure-elastic baseline in a circular, homogeneous, and isotropic medium. Extending this framework to non-circular geometries, heterogeneous media, and elastoplastic behavior represents the primary direction for future work.