One of the most important sources of clean energy in the future is expected to be solar energy which is considered a real time source. Research efforts to optimize solar energy utilization are mainly concentrated on the components of solar energy systems. Photovoltaic (PV) modules are considered the main components of solar energy systems and PVs’ operations typically occur without any supervisory mechanisms, which means many external and/or internal obstacles can occur and hinder a system’s efficiency. To avoid these problems, the paper presents a system to address and detect the faults in a PV system by providing a safer and more time efficient inspection system in real time. In this paper, we proposing a real time inspection and fault detection system for PV modules. The system has two cameras, a thermal and a Charge-Coupled Device CCD. They are mounted on a drone and they used to capture the scene of the PV modules simultaneously while the drone is flying over the solar garden. A mobile PV system has been constructed primarily to validate our real time proposed system and for the proposed method in the Digital Image and Signal Processing Laboratory (DISPLAY) at Western Michigan University (WMU). Defects have been detected accurately in the PV modules using the proposed real time system. As a result, the proposed drone mounted system is capable of analyzing thermal and CCD videos in order to detect different faults in PV systems, and give location information in terms of panel location by longitude and latitude.

Indoor positioning systems (IPS) have been recently adopted by many researchers for their broad applications in various Internet of Things (IoT) fields such as logistics, health, construction industries, and security. Received Signal Strength (RSS)-based fingerprinting approaches have been widely used for positioning inside buildings because they have a distinct advantage of low cost over other indoor positioning techniques. The signal power RSS is a function of the distance between the Mobile System (MS) and Access Point (AP), which varies due to the multipath propagation phenomenon and human body blockage. Furthermore, fingerprinting approaches have several disadvantages such as labor cost, diversity (in signals and environment), and computational cost. Eliminating redundancy by ruling out non-informative APs not only reduces the computation time, but also improves the performance of IPS. In this article, we propose a dimensionality reduction technique in a multiple service set identifier-based indoor positioning system with Multiple Service Set Identifiers (MSSIDs), which means that each AP can be configured to transmit N signals instead of one signal, to serve different kinds of clients simultaneously. Therefore, we investigated various kinds of approaches for the selection of informative APs such as spatial variance, strongest APs, and random selection. These approaches were tested using two clustering techniques including K-means and Fuzzy C-means. Performance evaluation was focused on two elements, the number of informative APs versus the accuracy of the proposed system. To assess the proposed system, real data was acquired from within the College of Engineering and Applied Sciences (CEAS) at the Western Michigan University (WMU) building. The results exhibit the superiority of fused Multiple Service Set Identifiers (MSSID) performance over the single SSID. Moreover, the results report that the proposed system achieves a positioning accuracy <0.85 m over 3000 m², with an accumulative density function (CDF) of 88% with a distance error of 2 m.

We propose a computer aided detection (CAD) system for the detection and classification of suspicious regions in mammographic images. This system combines a dimensionality reduction module (using principal component analysis), a feature extraction module (using independent component analysis), and a feature subset selection module (using rough set model). Rough set model is used to reduce the effect of data inconsistency while a fuzzy classifier is integrated into the system to label subimages into normal or abnormal regions. The experimental results show that this system has an accuracy of 84.03% and a recall percentage of 87.28%.

The purpose of the Fundamentals of Laparoscopic Surgery (FLS) training is to develop laparoscopic surgery skills by using simulation experiences. Several advanced training methods based on simulation have been created to enable training in a non-patient environment. Laparoscopic box trainers—cheap, portable devices—have been deployed for a while to offer training opportunities, competence evaluations, and performance reviews. However, the trainees must be under the supervision of medical experts who can evaluate their abilities, which is an expensive and time-consuming operation. Thus, a high level of surgical skill, determined by assessment, is necessary to prevent any intraoperative issues and malfunctions during a real laparoscopic procedure and during human intervention. To guarantee that the use of laparoscopic surgical training methods results in surgical skill improvement, it is necessary to measure and assess surgeons’ skills during tests. We used our intelligent box-trainer system (IBTS) as a platform for skill training. The main aim of this study was to monitor the surgeon’s hands’ movement within a predefined field of interest. To evaluate the surgeons’ hands’ movement in 3D space, an autonomous evaluation system using two cameras and multi-thread video processing is proposed. This method works by detecting laparoscopic instruments and using a cascaded fuzzy logic assessment system. It is composed of two fuzzy logic systems executing in parallel. The first level assesses the left and right-hand movements simultaneously. Its outputs are cascaded by the final fuzzy logic assessment at the second level. This algorithm is completely autonomous and removes the need for any human monitoring or intervention. The experimental work included nine physicians (surgeons and residents) from the surgery and obstetrics/gynecology (OB/GYN) residency programs at WMU Homer Stryker MD School of Medicine (WMed) with different levels of laparoscopic skills and experience. They were recruited to participate in the peg-transfer task. The participants’ performances were assessed, and the videos were recorded throughout the exercises. The results were delivered autonomously about 10 s after the experiments were concluded. In the future, we plan to increase the computing power of the IBTS to achieve real-time performance assessment.

Pixel-level depth information is crucial to many applications, such as autonomous driving, robotics navigation, 3D scene reconstruction, and augmented reality. However, depth information, which is usually acquired by sensors such as LiDAR, is sparse. Depth completion is a process that predicts missing pixels’ depth information from a set of sparse depth measurements. Most of the ongoing research applies deep neural networks on the entire sparse depth map and camera scene without utilizing any information about the available objects, which results in more complex and resource-demanding networks. In this work, we propose to use image instance segmentation to detect objects of interest with pixel-level locations, along with sparse depth data, to support depth completion. The framework utilizes a two-branch encoder–decoder deep neural network. It fuses information about scene available objects, such as objects’ type and pixel-level location, LiDAR, and RGB camera, to predict dense accurate depth maps. Experimental results on the KITTI dataset showed faster training and improved prediction accuracy. The proposed method reaches a convergence state faster and surpasses the baseline model in all evaluation metrics.

We present in this paper a framework for the automatic detection and localization of defects inside bridge decks. Using Ground-Penetrating Radar (GPR) raw scans, this framework is composed of a feature extraction algorithm using fractals to detect defective regions and a deconvolution algorithm using banded-independent component analysis (ICA) to reduce overlapping between reflections and to estimate the radar waves travel time and depth of defects. Results indicate that the defects' estimated horizontal location and depth falling within 2 cm (76.92% accuracy) and 1 cm (84.62% accuracy) from their actual values.