The Arctic region plays an important role in the global climate system. To promote the application of Medium Resolution Spectral Imager-II (MERSI-II) data in the ice surface temperature (IST) inversion, we used the thermal infrared channels (channels 24 and 25) of the MERSI-II onboard Chinese FY-3D satellite and the thermal infrared channels (channels 31 and 32) of the Earth Observing System (EOS) Moderate-Resolution Imaging Spectroradiometer (MODIS) onboard the National Aeronautical and Space Administration (NASA) Aqua satellite for data analysis. Using the Observation–Observation cross-calibration algorithm to cross-calibrate the MERSI and MODIS thermal infrared brightness temperature (Tb) data in the Arctic, channel 24 and 25 data from the FY-3D/MERSI-II on Arctic ice were evaluated. The thermal infrared Tb data of the MERSI-II were used to retrieve the IST via the split-window algorithm. In this study, the correlation coefficients of the thermal infrared channel Tb data between the MERSI and MODIS were >0.95, the mean bias was −0.5501–0.1262 K, and the standard deviation (Std) was <1.3582 K. After linear fitting, the MERSI-II thermal infrared Tb data were closer to the MODIS data, and the bias range of the 11 μm and 12 μm channels was −0.0214–0.0119 K and the Std was <1.2987 K. These results indicate that the quality of the MERSI-II data is comparable to that of the MODIS data, so that can be used for application to IST inversion. When using the MERSI thermal infrared Tb data after calibration to retrieve the IST, the results of the MERSI and MODIS IST were more consistent. By comparing the IST retrieved from the MERSI thermal infrared calibrated Tb data with MODIS MYD29 product, the mean bias was −0.0612–0.0423 °C and the Std was <1.3988 °C. Using the MERSI thermal infrared Tb data after calibration is better than that before calibration for retrieving the IST. When comparing the Arctic ocean sea and ice surface temperature reprocessed data (L4 SST/IST) with the IST data retrieved from MERSI, the bias was 0.9891–2.7510 °C, and the Std was <3.5774 °C.
Sea ice is an important marine phenomenon in the Arctic region, and it is of great importance to study the motion of Arctic sea ice in the present day when its melting is accelerated by global warming. This study proposes a method to retrieve the motion of sea ice based on the maximum cross-correlation (MCC) and the successive correction method (SCM). The proposed method can apply different scales of search ranges to template matching according to the location of sea ice in the Arctic area. In addition, the data assimilation method can assign different weights to different data. We used 36.5 GHz and 89 GHz brightness temperature (Tb) data from the microwave radiometer imager (MWRI) aboard the Fengyun-3D (FY-3D) satellite, for the first time in the literature, to retrieve the sea ice motion in the Beaufort Sea from January to April 2019. The retrieved sea ice motion results were in good agreement with those obtained from the motion of the buoys. Compared with the data from the buoys, the root mean-squared error (RMSE) of the sea ice motion retrieved from FY-3D/MWRI data was 1.1418 cm/s in the zonal direction and 1.0481 cm/s in the meridional direction, and the mean absolute error (MAE) between them was 0.7166 cm/s in the zonal direction and 0.6777 cm/s in the meridional direction. The RMSE between the sea ice motion obtained from the National Snow and Ice Data Center (NSIDC) and the motion of the buoys was 0.9515 cm/s in the zonal direction and 0.67003 cm/s in the meridional direction, and the MAE between them was 0.6576 cm/s in the zonal direction and 0.4922 cm/s in the meridional direction. The of daily average velocity from the FY-3D/MWRI results and NSIDC data product was 2.2726 cm/s in zonal and 1.9270 cm/s in meridional, and the MAE was 1.5103 cm/s in zonal and 1.1071 cm/s in zonal. The density of the merged data was higher than that obtained from a single polarization or frequency in this paper. The results indicate that FY-3D/MWRI Tb data can retrieve the sea ice motion successfully.
Sea ice motion (SIM) has significant implications for sea–air interactions, thermohaline circulation, and the development of the Arctic passage. This research proposes an improved SIM retrieval method from Fengyun-3D’s (FY-3D) microwave radiometer imager’s (MWRI) brightness temperature (Tb) data based on the modified classical maximum cross-correlation (MCC) method and the multisource data merging method. This study utilized buoy data to establish the search area range, applied distinct thresholds across various Arctic regions, and merged the buoy data, reanalysis wind data, and SIM retrieved from FY-3D/MWRI Tb data. In 2019, for the final Arctic SIM results retrieved from the MWRI 89 GHz and 36.5 GHz Tb data, the root-mean-square error (RMSE) and the mean average error (MAE) in the east–west direction were 2.07 cm/s and 1.38 cm/s and those in the north–south direction were 1.96 cm/s and 1.15 cm/s, compared to the ice-tethered profiler (ITP) data. Compared with the daily average data of the National Snow and Ice Data Center (NSIDC), the RMSE and MAE of the SIM results obtained in this study were 0.74 cm/s and 0.93 cm/s in the east–west direction, and 0.56 cm/s and 0.72 cm/s in the north–south direction, respectively. The monthly average of the SIM retrieved from the MWRI Tb data in this research also showed a good agreement with the monthly average of the NSIDC SIM product. The comparison showed that the MWRI Tb data could be used to retrieve the Arctic SIM, and the Arctic SIM retrieval method presented in this paper was accurate and general.