Elisabetta Maria Cepollaro

Dr. Elisabetta Maria Cepollaro

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
ECElisabetta Maria Cepollaro
Elisabetta Maria Cepollaro
RBRenata Botti
Renata Botti
GFGiorgia Franchin
Giorgia Franchin
Luciana LisiLuciana Lisi
Luciana Lisi
Paolo ColomboPaolo Colombo
Paolo Colombo
Stefano CiminoStefano Cimino
Stefano Cimino
Geopolymer-based monoliths manufactured by direct ink writing, containing up to 60% by weight of presynthesized ZSM5 with low Si/Al ratio, were investigated as structured catalysts for the NH3-SCR of NOx. Copper was introduced as the active metal by ion exchange after a preliminary acid treatment of the monoliths. Monolithic catalysts were characterized by morphological (XRD and SEM), textural (BET and pore size distribution), mechanical (compressive strength), chemical (ICP–MS), redox (H2-TPR) and surface (NH3-TPD) analyses, showing the preservation of Cu-exchanged zeolite features in the composite monoliths. NH3-SCR tests, carried out on both monolithic and powdered samples in the temperature range 70–550 °C, confirmed that composite monoliths provide a very good activity and a high selectivity to N2 over the whole range of temperatures explored due to the hierarchical structure of the materials, in addition to a good mechanical resistance—mostly related to the geopolymer matrix.

19 January 2024 in Catalysts
Verified
Journal Article
Open access
PDF file
ECElisabetta Maria Cepollaro
Elisabetta Maria Cepollaro
Stefano CiminoStefano Cimino
Stefano Cimino
MDMarco D'Agostini
Marco D'Agostini
Nicola GargiuloNicola Gargiulo
Nicola Gargiulo
GFGiorgia Franchin
Giorgia Franchin
Luciana LisiLuciana Lisi
Luciana Lisi
Monoliths manufactured by Direct Ink Writing containing 60% SSZ-13 (SiO2/Al2O3 = 23) and SiO2 with 10% laponite as a binder were investigated as self-standing structured catalysts for NH3-SCR of NOx after a short (4 h) and prolonged (24 h) ion exchange with copper and then compared with pure SSZ-13 exchanged under the same conditions. The catalysts were characterized by morphological (XRD and SEM), textural (BET and pore size distribution), chemical (ICP-MS), red-ox (H2-TPR), and surface (NH3-TPD) analyses. The silica-based binder uniformly covered the SSZ-13 particles, and copper was uniformly distributed as well. The main features of the pure Cu-exchanged SSZ-13 zeolite were preserved in the composite monoliths with a negligible contribution of the binder fraction. NH3-SCR tests, carried out on both monolithic and powdered samples in the temperature range of 70–550 °C, showed that composite monoliths provided very good activity, and that the intrinsic activity of SSZ-13 was enhanced by the hierarchical structure of the composite material.

28 August 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
ECElisabetta Maria Cepollaro
Elisabetta Maria Cepollaro
Stefano CiminoStefano Cimino
Stefano Cimino
Luciana LisiLuciana Lisi
Luciana Lisi
Mattia BiesuzMattia Biesuz
Mattia Biesuz
BSBalanand Santhosh
Balanand Santhosh
GSGian Domenico Soraru
Gian Domenico Soraru
The catalytic methanation of CO2 via the strongly exothermic equilibrium Sabatier reaction requires the development of structured catalysts with enhanced mass- and heat-transfer features to limit hot-spot formation, avoid catalyst deactivation, and control process selectivity. In this work, we investigated the use of polymer-derived SiC open-cell foams as structured carriers onto which γ-Al2O3 was applied by either dip-coating or pore-filling methods; eventually, Ru was dispersed by impregnation. The formation of an undesired insulating SiO2 layer on the surface of the SiC struts was prevented by a pyrolysis treatment under an inert atmosphere at temperatures varying from 800 up to 1800 °C. SiC foam substrates and their corresponding structured catalysts were characterized by SEM, XRD, N2 physisorption, and compressive strength measurements, and their CO2 methanation activity was tested at atmospheric pressure in a fixed bed flow reactor operated in the temperature range from 200 to 450 °C. SiC foams obtained at intermediate pyrolysis temperatures (1000–1200 °C) showed good mechanical strength and high compatibility with the Ru/Al2O3 active catalytic overlayer.

17 June 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
Stefano CiminoStefano Cimino
Stefano Cimino
ECElisabetta Maria Cepollaro
Elisabetta Maria Cepollaro
MFMichele Emanuele Fortunato
Michele Emanuele Fortunato
Luciana LisiLuciana Lisi
Luciana Lisi
Platinum was supported on ZSM5 at loadings from 0.1 to 1 wt% and tested for the Selective Catalytic Reduction of NO with H2 under excess O2 in a fixed bed reactor to address the issue of NOx emission abatement from H2-fueled internal combustion engines avoiding the additional devices for urea storage and injection. To reduce the undesired NO oxidation to NO2, which is activated by platinum at T > 200 °C, the 0.1%Pt/ZSM5 catalyst was further promoted with sodium. 5 wt% loading of Na strongly inhibited the NO oxidation while giving only a limited impact on the H2-SCR activity. Unpromoted and Na-promoted catalysts were characterized by XRD, SEM/EDX, N2 physisorption, and NH3-TPD to investigate the morphological, structural, and acid properties; H2 pulse chemisorption and DRIFTS of CO chemisorption were used to investigate the nature of Pt active species. Steady-state and transient operando DRIFTS experiments under NO+H2+O2 flow were employed to identify the adsorbed NOx species interacting with H2, and reaction intermediates as a function of the reaction conditions. The formation of ammonium intermediates via the reduction of surface nitrate species, playing a key role in H2-SCR catalyzed by 0.1Pt/ZSM5, was preserved at low Na load whilst NO2 formation was largely inhibited.

1 May 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
Luciana LisiLuciana Lisi
Luciana Lisi
ECElisabetta Maria Cepollaro
Elisabetta Maria Cepollaro
MFMichele Emanuele Fortunato
Michele Emanuele Fortunato
Stefano CiminoStefano Cimino
Stefano Cimino
This study investigates the synergistic promotional effects of CeO2 and La2O2SO4 as composite catalytic oxygen storage systems for soot oxidation in Gasoline Particulate Filters (GPFs) across a broad operating temperature range. Two 5 wt % CeO2-promoted Lanthanum oxysulfate compounds were prepared by mechanical mixing of pure phases or by supporting CeO2 via incipient wetness impregnation with a cerium nitrate precursor. The soot oxidation activity was evaluated using Thermogravimetric Analysis coupled with Mass Spectrometry (TG-MS) under both anaerobic and lean-O2 (1% vol.) environments, with the performance benchmarked against pure La- or Pr-oxysulfates and CeO2 reference materials. Comprehensive characterization via XRD, SEM, N2-physisorption, and H2-TPR revealed that the observed synergistic effects transcend the simple additive properties of the individual components.