Ghost imaging in the time domain has opened up new possibilities to retrieve ultrafast waveforms. A pre-requisite to ghost imaging in the time domain is a light source with random temporal intensity fluctuations that are fully uncorrelated over the duration of the temporal waveform being imaged. Here, we show that random fiber lasers are excellent candidates for ghost imaging in the time domain. We study the temporal correlations of the intensity fluctuations of a random fiber laser in different operating regimes and compare its performance in temporal ghost imaging configurations with that of a conventional multi-mode cavity-based fiber laser. Our results demonstrate that random fiber lasers can achieve superior performance for ghost imaging as compared to cavity-based fiber lasers where strong correlations at the cavity round-trip time can yield artefacts for waveforms of long duration.
Nonlinear frequency conversion of wavelength agile and high-power random fiber lasers can provide a promising way to generate continuous-wave (CW) visible and mid-infrared (MIR) light with unique properties such as the continuous modeless spectrum, low temporal/spatial coherence, and high temporal stability. Here, we report a dual-wavelength switchable and tunable random Raman fiber laser (RRFL) based on a phosphosilicate fiber that has two Raman gain peaks for the first time and demonstrate its superior capability to generate widely tunable CW visible and mid-infrared light via nonlinear frequency conversions. By using the combination of a tunable pump and two tunable gratings in Littrow configuration that can provide separated point feedback for the two Stokes wavelengths corresponding to silica- and phosphorus-related Raman peaks, the spectrum of an RRFL can be flexibly manipulated for the aim of nonlinear frequency conversions, including single-wavelength tunable emission at the 1.1 μm or 1.2 μm band for second-harmonic generation (SHG), dual-wavelength simultaneously tunable emission at the 1.1 μm and 1.2 μm bands for the sum-frequency generation (SFG), and dual-wavelength separation tunable emission for difference-frequency generation (DFG). As a result, with the combination of SHG and SFG in a periodically poled lithium niobate crystal array, we experimentally demonstrate the broadest tuning range (560–630 nm) of visible light generated from an RRFL, to the best of our knowledge. The tunable MIR light in the range of 10.7–12.3 μm is also demonstrated through DFG of an RRFL operating in separation tunable dual-wavelength emission mode in a BaGa4Se7 (BGSe) crystal, which is the first realization of >10 μm CW DFG in the BGSe crystal. We believe the developed dual-wavelength switchable and tunable RRFL can provide a new compact, robust, and cost-effective platform to realize broadly tunable light in both the visible and MIR regions, which can also find potential applications in imaging, sensing, and temporal ghost imaging in various spectral bands.
High-order random fiber laser amplification (RFLA) is an effective way for realization of ultra-long optical transmission and sensing. However, potential issues such as modulation instability (MI) and relative intensity noise (RIN) transfer would largely decrease the system performance unless the amplifying schemes and pump power are cautiously designed. In this paper, through simulations and optimizations, a 175 km repeaterless Brillouin optical time-domain analyzer (BOTDA) with uncertainty of $\pm$ 2.06 MHz and spatial resolution of 8 m is demonstrated based on the hybrid of forward 2nd-order RFLA and backward 3rd-order RFLA. The figure of merit (FoM) of the system is >200,000. As far as we know, this is the longest distance and highest FoM for repeaterless BOTDA reported so far.
Wider bandwidth always means better overall performance for an information system. Naturally, this criterion can also be applied to phase-sensitive optical time domain reflectometry (Φ-OTDR), which is a typical distributed optical fiber sensing (DOFS) system. Thus, an indispensable way to enhance the performance of Φ-OTDR is to increase the available system bandwidth, which is usually limited by the electrical components. As a kind of frequency resources, the negative frequency band (NFB) has been used in communication systems based on coherent receivers and high-order modulation, but is still rarely used in DOFS. In this paper, we make a comprehensive study on how to utilize NFB in Φ-OTDR and thus double the available system bandwidth. Moreover, the related improvement of sensing performance is experimentally demonstrated. The positive and negative frequency multiplexing is utilized together with frequency division multiplexing to break the inherent trade-off between sensing distance and scan-rate. As a result, 21.6 kHz scan-rate is experimentally achieved on a 103 km fiber, with strain resolution and 9.3 m spatial resolution. To the best of our knowledge, this is the best sensing performance in long distance Φ-OTDR > 100 km. The proposed scheme can also be applied to other DOFS systems with heterodyne-detection, opening up new possibilities for performance enhancement in DOFS systems.