Renewable energy represented by wind energy and photovoltaic energy is used for energy structure adjustment to solve the energy and environmental problems. However, wind or photovoltaic power generation is unstable which caused by environmental impact. Energy storage is an important method to eliminate the instability, and lithium batteries are an increasingly mature technique. If the capacity is too large, it would cause waste and cost would increase, but too small capacity cannot schedule well. At the same time, the size of energy storage capacity is also constrained by power consumption, whereas large-scale industrial power consumption is random and non-periodic. This is a complex problem which needs a model that can not only dispatch but also give a reasonable storage capacity. This paper proposes a model considering the cycle life of a lithium battery and the installation parameters of the battery, and the electricity consumption data and photovoltaic power generation data of an industrial park was used to establish an energy management model. The energy management system aimed to reduce operating costs and obtain optimal energy storage capacity, which is constrained by lithium battery performance and grid demand. With the operational cost and reasonable battery capacity as the optimization objectives, the Deep Deterministic Policy Gradient (DDPG) method, the greedy dynamic programming algorithm, and the genetic algorithm (GA) were adopted, where the performance of lithium battery and the requirement of power grid were the constraints. The simulation results show that compared with the current forms of energy, the three energy management methods reduced the cost of capacity and operating of the energy storage system by 18.9%, 36.1%, and 35.9%, respectively.

Paper drying is a highly energy-intensive and complicated multivariate process. The dryer section plays an important role in the energy consumption of a paper machine, especially of thermal energy. A comprehensive method for assessing the energy performance of the dryer section was investigated in this study to improve energy efficiency. This method was divided into three component processes: energy and evaporation load audit, field test and observation, and energy flow analysis and energy efficiency estimation. In a case study, we found that the method could, in addition to analyzing the key factors that restrict drying efficiency, also depict the details of energy consumption clearly. At the same time, several significant energy-saving measures were suggested to improve the energy efficiency of the paper-drying process.

The pulp and paper sector is the fourth largest industrial sector in terms of energy use in the world. Of the numerous processes involved in paper-making by a paper machine, the dryer section is the process that consumes the largest amount of energy. A model-based method for estimating energy-saving potentials of the dryer section was put forward in the present study. It was done by four steps: establishing a mathematical model about energy consumption, determining the model parameters, benchmarking the drying performance to obtain the corresponding energy-saving measures, and estimating the energy-saving potentials by using the mathematical model. In a case study, a multi-cylinder dryer section was selected to illustrate the method. After a fundamental field test and observation, several operating problems that restricted the energy performance of paper drying were found. And then several reasonable energy-saving measures were suggested to the operators. Finally, applying the mathematic model, it was found that 0.32 ton of steam will be saved when producing 1 ton of paper in recommended operating conditions. With the designed capacity of 200,000 tons/year, the annual steam-savings will be 64,000 tons. Generally, the price of steam is 130–150 Chinese Yuan (about US$21–24) in China, and the annual economic benefits will be 8.32–9.60 million Chinese Yuan (about US$1.344–1.536 million).

With the development of the customization concept, small-batch and multi-variety production will become one of the major production modes, especially for fast-moving consumer goods. However, this production mode has two issues: high production cost and the long manufacturing period. To address these issues, this study proposes a multi-objective optimization model for the flexible flow-shop to optimize the production scheduling, which would maximize the production efficiency by minimizing the production cost and makespan. The model is designed based on hybrid algorithms, which combine a fast non-dominated genetic algorithm (NSGA-II) and a variable neighborhood search algorithm (VNS). In this model, NSGA-II is the major algorithm to calculate the optimal solutions. VNS is to improve the quality of the solution obtained by NSGA-II. The model is verified by an example of a real-world typical FFS, a tissue papermaking mill. The results show that the scheduling model can reduce production costs by 4.2% and makespan by 6.8% compared with manual scheduling. The hybrid VNS-NSGA-II model also shows better performance than NSGA-II, both in production cost and makespan. Hybrid algorithms are a good solution for multi-objective optimization issues in flexible flow-shop production scheduling.

With the global energy crisis and environmental pollution intensifying, tissue papermaking enterprises urgently need to save energy. The energy consumption model is essential for the energy saving of tissue paper machines. The energy consumption of tissue paper machine is very complicated, and the workload and difficulty of using the mechanism model to establish the energy consumption model of tissue paper machine are very large. Therefore, this article aims to build an empirical energy consumption model for tissue paper machines. The energy consumption of this model includes electricity consumption and steam consumption. Since the process parameters have a great influence on the energy consumption of the tissue paper machines, this study uses three methods: linear regression, artificial neural network and extreme gradient boosting tree to establish the relationship between process parameters and power consumption, and process parameters and steam consumption. Then, the best power consumption model and the best steam consumption model are selected from the models established by linear regression, artificial neural network and the extreme gradient boosting tree. Further, they are combined into the energy consumption model of the tissue paper machine. Finally, the models established by the three methods are evaluated. The experimental results show that using the empirical model for tissue paper machine energy consumption modeling is feasible. The result also indicates that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The experimental results show that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The mean absolute percentage error of the electricity consumption model and the steam consumption model built by the extreme gradient boosting tree is approximately 2.72 and 1.87, respectively. The root mean square errors of these two models are about 4.74 and 0.03, respectively. The result also indicates that using the empirical model for tissue paper machine energy consumption modeling is feasible, and the extreme gradient boosting tree is an efficient method for modeling energy consumption of tissue paper machines.