The presence of Contaminants of Emerging Concern (CECs) in drinking water is raising concern for potential negative effects on human health. Ozonation and adsorption on activated carbon are the most suitable processes for CECs removal in drinking water treatment plants (DWTPs). This study aims at evaluating the performance of ozonation and adsorption as in-series processes compared to those of the stand-alone processes, focusing on 18 compounds representative of various CECs families. No CECs spike was performed to evaluate the effectiveness of these processes towards CECs at their environmental concentrations. Adsorption isotherms were performed on water samples collected before and after the full-scale ozonation in a DWTP, testing different combinations of ozone and activated carbon doses. Generally, the combination of the two processes was beneficial (83% average removal) compared to adsorption and ozonation alone (71% and 34% average removal respectively). The effect of ozonation on adsorption depends on CECs reactivity with ozone, since ozonation improves the adsorption performance of poorly-oxidizable CECs, but worsens that of well-oxidizable compounds. The removal of organic matter, investigated by absorbance at 254 nm and fluorescence, by ozonation reduces competition for the subsequent CECs removal by adsorption (up to 20% increase of total CECs adsorption). Finally, the removal of both absorbance and fluorescence seems to be a good proxy variables for total CECs adsorption, with different relationships depending on the presence of ozonation. Conversely, it is not effective for ozonation, since the relationship depends on the reactivity of the specific CEC with ozone.
The occurrence and hazard risks of mixtures of Contaminants of Emerging Concern (CECs) in drinking water (DW) lead to serious consideration regarding the possible impacts on public health. Consequently, there is ongoing research, development and empowerment of risk assessment procedures to get more toxicological insight. For instance, alkylphenols and phthalates have been frequently reported to be present both in bottled and tap water, affecting different human endpoints. Currently, deterministic chemical risk assessment (CRA) is used to evaluate the compounds' mixture health risk. However, CRA deals just qualitatively with sources of uncertainty, which may lead to erroneous assessment of risks. Here, a new procedure for quantitative chemical risk assessment of CEC mixtures (QCRAMIX) is proposed. Its potential is illustrated by a case study where the risks related to the presence of mixtures of alkylphenols or phthalates in tap versus bottled DW are compared. Uncertainties in both exposure and hazard assessment steps of the procedure are included to calculate a probabilistic mixture Benchmark Quotient (BQMIX). The QCRAMIX procedure highlighted the non-negligible health risks posed by those compounds in both DW sources based on overall water consumption. In fact, DW consumers' behaviour in 13 different countries, in terms of total DW consumption and fraction of bottled and tap water consumed, were considered to evaluate the influence on health risk. For alkylphenols, the total water consumption was found to be the most relevant factor in increasing the health risk, while for phthalates the risk was found to be mainly influenced by the percentage of bottled water consumed. Hence, the proposed QCRAMIX procedure can be a valuable tool for prioritization of CECs to be included in DW regulations which aim to minimize the overall risk, accounting for actual DW consumption.