The high-temperature reactor pebble-bed module (HTR-PM) is a modular high-temperature gas-cooled reactor demonstration power plant. Its first criticality experiment is scheduled for the latter half of 2021. Before performing the first criticality experiment, a prediction calculation was performed using PANGU code. This paper presents the calculation details for predicting the HTR-PM first criticality using PANGU, including the input model and parameters, numerical results, and uncertainty analysis. The accuracy of the PANGU code was demonstrated by comparing it with the high-fidelity Monte Carlo solution, using the same input configurations. It should be noted that keff can be significantly affected by uncertainties in nuclear data and certain input parameters, making the criticality calculation challenge. Finally, the PANGU is used to predict the critical loading height of the HTR-PM first criticality under design conditions, which will be evaluated in the upcoming experiment later this year.
The maximum fuel temperature under accident condition is the most important parameter of inherently safe characteristics of HTR-PM, and the DLOFC accident may lead to a peak accident fuel temperature. And there are a variety of uncertainty sources in the maximum fuel temperature calculations, and thus the contributions of these uncertainty sources to the final calculated maximum fuel temperature should be quantified to check whether the peak value exceed the technological limit of 1620°C or not. Eight uncertainty input parameters are selected for inclusion in this uncertainty study, and their associated 2 standard deviation uncertainties and probability density functions are specified. Then, the DLOFC thermal analyses and uncertainty analysis are performed with the home-developed ATHENA and CUSA. The numerical results indicate that the pebble-bed effective conductivity and the decay heat contribute the most of the uncertainty in the DLOFC maximum fuel temperature while this peak fuel temperature is most sensitive to the initial reactor power and the decay heat. In short, uncertainties in these selected eight parameters lead to the two standard deviation (2σ) uncertainty of ±77.6°C (or 5.2%) around the mean value of 1493°C for the maximum fuel temperature under DLOFC accident of HTR-PM. At the same time, the LHS-SVDC method of CUSA is recommended to propagate uncertainties in inputs and 100–200 model simulations seem to be sufficient to get an uncertainty prediction with full confidence.