Synthetic aperture radar (SAR) tomography has been strongly developed in the last years for the analysis at fine scale of data acquired by high-resolution interferometric SAR sensors as a technique alternative to classical persistent scatterer interferometry and able to resolve also multiple scatterers. SqueeSAR is a recently proposed solution which, in the context of SAR interferometry at the coarse scale analysis stage, allows taking advantage of the multilook operation to filter interferometic stacks by extracting, pixel by pixel, equivalent scattering mechanisms from the set of all available interferometric measurement collected in the data covariance matrix. In this paper, we investigate the possibilities to extend SqueeSAR by allowing the identification of multiple scattering mechanisms from the analysis of the covariance matrix. In particular, we present a new approach, named “Component extrAction and sElection SAR” algorithm, that allows taking advantage of the principal component analysis to filter interferograms relevant to the decorrelating scatterer, i.e., scatterers that may exhibit coherence losses depending on the spatial and temporal baseline distributions, and to detect and separate scattering mechanisms possibly interfering in the same pixel due to layover directly at the interferogram generation stage. The proposed module allows providing options useful for classical interferometric processing to monitor ground deformations at lower resolution (coarse scale), as well as for possibly aiding the data calibration preliminary for the subsequent full-resolution interferometric/tomographic (fine scale) analysis. Results achieved by processing high-resolution Cosmo-SkyMed data, characterized by the favorable features of a large baseline span, are presented to explain the advantages and validate this new interferometric processing solution.

The new generation of synthetic aperture radar (SAR) sensors is providing images with very high spatial resolution, improved up to the meter scale. Such a resolution increase allows more accurate monitoring capabilities by means of interferometric approaches. The use of higher frequency enhances the sensitivity of the system even to minute changes, such as thermal dilations. This phenomenon has an impact on the interferometric products, particularly on the deformation velocity maps, if not properly handled. Man-made structures, such as steel core bridges and specific buildings, may be very sensible to thermal dilation effects. By extending the multitemporal differential interferometry SAR processing chains, in our case based on the multidimensional imaging (MDI) approach, an additional parameter related to temperature differences at acquisition instants, the thermal coefficient, can be accurately estimated. This parameter provides interesting perspectives in application to infrastructure monitoring: It brings information about the thermal behavior of the imaged objects. In this letter, we investigate the thermal response of the Musmeci bridge (Potenza, Italy), by experimenting the extended MDI approach on a real TerraSAR-X data set. Results highlight the possibility of such a technique to obtain measurements of the motion that is highly correlated with temperature, thus providing useful information about the static structure of bridges.

With reference to the application to the imaging and monitoring of infrastructures and buildings in urban areas, SAR tomography has been mainly developed and tested at full resolution. In this work, we investigate the possibility related to the use of a multilook approach for fine resolution analysis of ground structures that combines SAR tomography and a method, CAESAR, recently proposed for classical DInSAR analysis at coarse resolution over large areas. Shown results, achieved by processing two 3 m spatial resolution (stripmap mode) COSMO-SKYMED datasets relative to the urban areas of Naples and Rome (Italy), clearly indicate that the proposed multilook-based method allows achieving an impressive density of detected scatterers over buildings and infrastructures, much higher than those achievable with standard full-resolution methods.