This study describes the development of a small hyperspectral Unmanned Aircraft System (HyUAS) for measuring Visible and Near-Infrared (VNIR) surface reflectance and sun-induced fluorescence, co-registered with high-resolution RGB imagery, to support field spectroscopy surveys and calibration and validation of remote sensing products. The system, namely HyUAS, is based on a multirotor platform equipped with a cost-effective payload composed of a VNIR non-imaging spectrometer and an RGB camera. The spectrometer is connected to a custom entrance optics receptor developed to tune the instrument field-of-view and to obtain systematic measurements of instrument dark-current. The geometric, radiometric and spectral characteristics of the instruments were characterized and calibrated through dedicated laboratory tests. The overall accuracy of HyUAS data was evaluated during a flight campaign in which surface reflectance was compared with ground-based reference measurements. HyUAS data were used to estimate spectral indices and far-red fluorescence for different land covers. RGB images were processed as a high-resolution 3D surface model using structure from motion algorithms. The spectral measurements were accurately geo-located and projected on the digital surface model. The overall results show that: (i) rigorous calibration enabled radiance and reflectance spectra from HyUAS with RRMSE < 10% compared with ground measurements; (ii) the low-flying UAS setup allows retrieving fluorescence in absolute units; (iii) the accurate geo-location of spectra on the digital surface model greatly improves the overall interpretation of reflectance and fluorescence data. In general, the HyUAS was demonstrated to be a reliable system for supporting high-resolution field spectroscopy surveys allowing one to collect systematic measurements at very detailed spatial resolution with a valuable potential for vegetation monitoring studies. Furthermore, it can be considered a useful tool for collecting spatially-distributed observations of reflectance and fluorescence that can be further used for calibration and validation activities of airborne and satellite optical images in the context of the upcoming FLEX mission and the VNIR spectral bands of optical Earth observation missions (i.e., Landsat, Sentinel-2 and Sentinel-3).

Thermal inertia has been successfully used in remote sensing applications that span from geology, geomorphology to hydrology. In this paper, we propose the use of thermal inertia for describing snow dynamics. Two different formulations of thermal inertia were tested using experimental and simulated data related to snowpack dynamics. Experimental data were acquired between 2012 and 2017 from an automatic weather station located in the western Italian Alps at 2,160 m. Simulations were obtained using the one‐dimensional multilayer Crocus model. Results provided evidences that snowmelt phases can be recognized, and average snowpack density can be estimated reasonably well from thermal inertia observations (R² = 0.71; RMSE = 65 kg/m³). The empirical model was also validated with manual snow density measurements (R² = 0.80; RMSE = 54 kg/m³). This study is the first attempt at the exploitation of thermal inertia for snow monitoring, combining optical and thermal remote sensing data.

Glacier surfaces are highly heterogeneous mixtures of ice, snow, light-absorbing impurities and debris material. The spatial and temporal variability of these components affects ice surface characteristics and strongly influences glacier energy and mass balance. Remote sensing offers a unique opportunity to characterize glacier optical and thermal properties, enabling a better understanding of different processes occurring at the glacial surface. In this study, we evaluate the potential of optical and thermal data collected from field and drone platforms to map the abundances of predominant glacier surfaces (i.e., snow, clean ice, melting ice, dark ice, cryoconite, dusty snow and debris cover) on the Zebrù glacier in the Italian Alps. The drone surveys were conducted on the ablation zone of the glacier on 29 and 30 July 2020, corresponding to the middle of the ablation season. We identified very high heterogeneity of surface types dominated by melting ice (30% of the investigated area), dark ice (24%), clean ice (19%) and debris cover (17%). The surface temperature of debris cover was inversely related to debris-cover thickness. This relation is influenced by the petrology of debris cover, suggesting the importance of lithology when considering the role of debris over glaciers. Multispectral and thermal drone surveys can thus provide accurate high-resolution maps of different snow and ice types and their temperature, which are critical elements to better understand the glacier’s energy budget and melt rates.

Forests are critical for providing ecosystem services and contributing to human well-being, but their health and extent are threatened by climate change, requiring effective monitoring systems. Traditional field-based methods are often labour-intensive, costly, and logistically challenging, limiting their use for large-scale applications. Drones offer advantages such as low operating costs, versatility, and rapid data collection. However, challenges remain in optimising data processing and methods to effectively integrate the acquired data for forest monitoring. This study addresses this challenge by integrating drone-based LiDAR and multispectral data for forest species classification and health monitoring. We developed the methodology in Ticino Park (Italy), where intensive field campaigns were conducted in 2022 to collect tree species compositions, the leaf area index (LAI), canopy chlorophyll content (CCC), and drone data. Individual trees were first extracted from LiDAR data and classified using spectral and textural features derived from the multispectral data, achieving an accuracy of 84%. Key forest traits were then retrieved from the multispectral data using machine learning regression algorithms, which showed satisfactory performance in estimating the LAI (R² = 0.83, RMSE = 0.44 m² m⁻²) and CCC (R² = 0.80, RMSE = 0.33 g m⁻²). The retrieved traits were used to track species-specific changes related to drought. The results obtained highlight the potential of integrating drone-based LiDAR and multispectral data for cost-effective and accurate forest health monitoring and change detection.

PRISMA is a hyperspectral satellite mission launched by the Italian Space Agency (ASI) in April 2019. The mission is designed to collect data at global scale for a variety of applications, including those related to the cryosphere. This study presents an evaluation of PRISMA Level 1 (L1) and Level 2 (L2D) products for different snow conditions. To the aim, PRISMA data were collected at three sites: two in the Western European Alps (Torgnon and Plateau Rosa) and one in East Antarctica (Nansen Ice Shelf). PRISMA data were acquired contemporary to both field measurements and Sentinel‐2 data. Simulated Top of the Atmosphere (TOA) radiance data were then compared to L1 PRISMA and Sentinel‐2 TOA radiance. Bottom Of Atmosphere (BOA) reflectance from PRISMA L2D and Sentinel‐2 L2A data were then evaluated by direct comparison with field data. Both TOA radiance and BOA reflectance PRISMA products were generally in good agreement with field data, showing a Mean Absolute Difference (MAD) lower than 5%. L1 PRISMA TOA radiance products resulted in higher MAD for the site of Torgnon, which features the highest topographic complexity within the investigated areas. In Plateau Rosa we obtained the best comparison between PRISMA L2D reflectance data and in situ measurements, with MAD values lower than 5% for the 400–900 nm range. The Nansen Ice Shelf instead resulted in MAD values <10% between PRISMA L2D and field data, while Sentinel‐2 BOA reflectance showed higher values than other data sources.