Chengliang Hu

Prof. Dr. Chengliang Hu


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2020 in Friction
Verified
Journal Article
Open access
PDF file
Kuniaki DohdaKuniaki Dohda
Kuniaki Dohda
MYMasahito Yamamoto
Masahito Yamamoto
CHChengliang Hu
Chengliang Hu
LDLaurent Dubar
Laurent Dubar
KEKornel F. Ehmann
Kornel F. Ehmann
Galling phenomena in metal forming not only affect the quality of the engineered surfaces but also the success or failure of the manufacturing operation itself. This paper reviews the different galling conditions in sheet and bulk metal forming processes along with their evolution and the effects of temperature on galling. A group of anti-galling methods employed to prevent galling defects are also presented in detail. The techniques for quantitatively measuring galling are introduced, and the related prediction models, including friction, wear, and galling growth models, are presented to better understand the underlying phenomena. Galling phenomena in other processes similar to those occurring in metal forming are also examined to suggest different ways of further studying galling in metal forming. Finally, future research directions for the study of galling in metal forming are suggested.

30 March 2023 in Friction
Verified
Journal Article
Open access
PDF file
CHChengliang Hu
Chengliang Hu
SOShogo Osaki
Shogo Osaki
BCBaixuan Cai
Baixuan Cai
MAMitsuru Aoyama
Mitsuru Aoyama
KDKuniaki Dohda
Kuniaki Dohda
This study evaluated dry-in-place lubricants used for cold forging. A group of isothermal compression tests with a strain rate ( $$\dot \varepsilon $$ ε ˙ ) range of 0.001–1 s−1 and temperature (T) range of 30–400 °C were completed. The flow stress (σ) curves of annealed steel S45C were obtained, and a corresponding Hensel—Spittel model was developed to support finite element (FE) simulation. The sensitivity of the steady combined forward and backward extrusion (SCFBE) test proposed in another study was improved by approximately 20% after it was optimized using the results of the FE simulations. Key parameters were identified, and the calibration curves after optimization were obtained. On the basis of the optimized test, a friction testing setup with a heating system was developed, in which the die temperature could be adjusted from room temperature (RT) to 230 °C. Three dry-in-place lubricants and conventional phosphating lubricant were tested, and the friction factors (m), forming loads, and ejection loads were measured. The surface features of the specimens after testing were also investigated. According to the testing results, of the three tested dry-in-place lubricants, the mica type was the best. In addition, the optimized friction testing design was verified as effective.

3 May 2018 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
CHChengliang Hu
Chengliang Hu
LCLunqiang Chen
Lunqiang Chen
ZZZhen Zhao
Zhen Zhao
AGAijun Gong
Aijun Gong
WSWeibing Shi
Weibing Shi

8 June 2024 in Metals
Verified
Journal Article
Open access
PDF file
DHDaxin Han
Daxin Han
CHChengliang Hu
Chengliang Hu
The extensive use of carbon fiber-reinforced composites and aluminum alloys represents the highest level of automotive body-in-white lightweighting. The effective and secure joining of these heterogeneous materials remains a prominent and actively researched topic within the scientific community. Among various joining techniques, clinching has emerged as a particularly cost-effective solution, experiencing significant advancements. However, the application of clinching is severely limited by the properties of the joining materials. In this work, various clinching processes for the joining of composites and aluminum alloys reported in recent research are described in detail according to three broad categories based on the principle of technological improvement. By scrutinizing current clinching technologies, a forward-looking perspective is presented for the future evolution of clinching technology in terms of composite–aluminum joints, encompassing aspects of tool design, process analysis, and the enhancement of joint quality. This work provides an overview of current research on clinching of CFRP and aluminum and serves as a reference for the further development of clinching processes.

22 July 2022 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
CHChengliang Hu
Chengliang Hu
YZYue Zhuo
Yue Zhuo
LZLinlin Zhu
Linlin Zhu
XHXiongrong Huang
Xiongrong Huang
HLHongyu Liu
Hongyu Liu

1 December 2009 in Transactions of Nonferrous Metals Society of China
Verified
Journal Article
Closed access
CHChengliang Hu
Chengliang Hu
ZZZhen Zhao
Zhen Zhao
GYGuan-Ren Yin
Guan-Ren Yin
ZYZhao-Feng Yuan
Zhao-Feng Yuan
XXXiang-Long Xu
Xiang-Long Xu