The decarburisation process is studied with the help of mathematical modelling of RH degasser with reaction interface area approach, considering multi-component mixed phase mass transport theory. An algorithm is developed by considering Ar gas, bath surface and CO gas bubbles as the reaction sites for decarburisation process. On the basis of this, the model is developed using MATLAB. The model is tested with five sets of data which are obtained from JSW Steel Plant Ltd. The results obtained from the model have been compared with the industrial data as well as the data obtained from literature survey. It is shown that the nitrogen and hydrogen removal are triggered more for higher CO evolution rate. The relations between carbon removal and factors like area of interface, time and vacuum pressure are proposed.
A recently developed phase-field model for simulating diffusion-induced grain boundary migration (DIGM) is applied to binary Fe–Zn. The driving force for the boundary migration is assumed to come from the coherency strain energy mechanism suggested by Sulonen. The effect of the angle of the grain boundary with the surface on the velocity of the boundary migration is studied in detail. The simulation results compare favorably with experimental observations, such as the oscillatory motion of the grain boundary, velocity of the moving grain boundary during DIGM, and the maximum value of mole fraction of Zn at the surface after 20 h of heat treatment.