Modular input-series–output-parallel (ISOP) converters are very suitable for high-voltage and high-power applications. In order to ensure the normal operation of ISOP converters, it is necessary to realize the input-voltage and output-current equalization of each submodule. However, there are few studies on the input-voltage and output-current equalization performance of the ISOP system. In this paper, the input-voltage and output-current equalization characteristics of a Boost + LLC modular ISOP converter are studied based on the small-signal model. In this paper, the small-signal model of an ISOP system is first established, and then the input-voltage and output-current equalization performance of the ISOP system under the condition of inconsistent submodule parameters are analyzed. Finally, simulations and experiments are reported to verify the results. The experimental results show that the ISOP system composed of a Boost + LLC cascaded module has excellent voltage and current self-equalization performance.
Irregular wheel wear can significantly degrade wheel–rail interaction performance and, in severe cases, compromise the safety of high-speed trains. Accurate and timely monitoring of wheel wear is crucial for maintaining operational reliability. Existing monitoring methods often rely on high-end sensors or are sensitive to environmental disturbances, limiting their practical deployment. This study proposes a novel method for monitoring irregular wheel wear by analyzing the stator current spectrum of traction motors. Firstly, an electromechanical coupled model is developed by integrating the electric drive system with the vehicle–track dynamic model to capture the propagation of wear-induced excitation. The effect of polygonal wear on the stator current is investigated, revealing the presence of harmonic components coupled with the wear excitation frequency. To extract these features, a comb filter based on Variational Mode Decomposition (VMD) is introduced. The method effectively isolates wheel wear-related harmonics from existing electrical harmonics in the stator current signal. Simulation results demonstrate that the proposed approach can accurately detect harmonic features caused by polygonal wear, validating its applicability. This method provides a feasible and non-intrusive solution for wheel wear monitoring, offering theoretical support for condition-based maintenance of high-speed rail systems.