The Organic Rankine Cycle (ORC) is widely considered as a promising technology to produce electrical power output from low-grade thermal sources. In the last decade, several power plants have been installed worldwide in the MW range. However, despite its market potential, the commercialization of ORC power plants in the kW range did not reach a high level of maturity, for several reasons. Firstly, the specific price is still too high to offer an attractive payback period, and secondly, potential costumers for small-scale ORCs are typically SMEs (Small-Medium Enterprises), generally less aware of the potential savings this technology could lead to. When it comes to small-scale plants, additional design issues arise that still limit the widespread availability of the technology. This review paper presents the state of the art of the technology, from a technical and economic perspective. Working fluid selection and expander design are illustrated in detail, as they represent the bottleneck of the ORC technology for small-scale power production. In addition, a European market analysis is presented, which constitutes a useful instrument to understand the future evolution of the technology.
Modern heavy duty diesel engines can well extend the goal of 50% brake thermal efficiency by utilizing waste heat recovery (WHR) technologies. The effect of an ORC WHR system on engine brake specific fuel consumption (bsfc) is a compromise between the fuel penalty due to the higher exhaust backpressure and the additional power from the WHR system that is not attributed to fuel consumption. This work focuses on the fuel efficiency benefits of installing an ORC WHR system on a heavy duty diesel engine. A six cylinder, 7.25ℓ heavy duty diesel engine is employed to experimentally explore the effect of backpressure on fuel consumption. A zero-dimensional, detailed physical ORC model is utilized to predict ORC performance under design and off-design conditions. The ORC model includes a detailed exhaust gas heat exchanger model and a thermodynamic ORC submodel to explore the effect of recovering various amounts of waste heat on ORC thermal efficiency under the same engine load and speed conditions. This study focuses on maximum engine power conditions where the engine exhaust gas and temperature are maximized. The results show that increasing the heat exchanger surface area leads to higher heat recovered at the expense of higher exhaust backpressure and higher WHR system weight, as the ΔT between the fluids approaches zero. At the same time, the weight increase of the heat exchange is illustrated as the main parameter that limits the ORC system design in vehicular applications. Finally, the optimum heat exchanger length is a trade-off between exhaust backpressure, the required net ORC power and weight increase.