Delong Dou

Dr. Delong Dou

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2019 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
YWYanzhong Wang
Yanzhong Wang
DDDelong Dou
Delong Dou
ESE Shiyuan
E Shiyuan
JWJianjun Wang
Jianjun Wang
The mesh stiffness and contact ratio of gear drive are very important factors which have a great impact on the dynamic load. Contact ratio also affects the fluctuation and the mode of change of the mesh stiffness. In this research, a novel high contact ratio internal gear with a circular arc contact path is introduced. However, the irregular tooth profile of non-involute gear usually causes the numerical calculation to be more complex. To get the torsional mesh stiffness of a pair of internal spur gear, the two-dimensional finite element models of involute internal gear and high contact ratio internal gear are presented and compared. In addition, the influence of input torque on torsional mesh stiffness and contact ratio are analyzed. The mesh stiffness of a single tooth pair and the effect of different engagement positions on mesh stiffness are obtained and compared. Finally, experimental measurement of contact ratio is established by strain gauge technique. It is shown that the torsional mesh stiffness increases with the increase of input torque, and the greater the contact ratio, the smoother the gear drive.

25 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YWYanzhong Wang
Yanzhong Wang
PLPeng LIU
Peng LIU
DDDelong Dou
Delong Dou
Tooth root bending stress and surface contact stress are two major determinants of the load carrying capacity of gear drives. Generally, a high contact ratio has the potential to enhance the gear strength. In this paper, the basic procedures and methods for constructing a high-contact-ratio (HCR) internal spur gear pair with the arc path of the contact are presented. The effects of design and modification parameters such as deflection angle, modification angle, and addendum coefficient on gear drive are analyzed in detail based on 2D finite-element models (FEMs). A comparison of experimental and finite-element analyses (FEA) of the bending stress, contact stress, and contact ratio between HCR and involute internal spur gear drives was conducted to demonstrate the advantages of the HCR gear drive in terms of load capacity. The results show that appropriately increasing the deflection angle and addendum coefficient is beneficial for reducing bending and contact stresses. It was also observed that the bending and contact stresses of a HCR pinion are lower than those of an involute one. Moreover, the contact ratio increases with input torque.

15 September 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
YWYanzhong Wang
Yanzhong Wang
DDDelong Dou
Delong Dou
Contact characteristics of friction pair play a crucial role in the torque transmission capacity and temperature rise prediction of automotive clutches. In this study, a Multi-cone friction pair used in wet clutches has been proposed. Each pair of conical contact is considered as the contact between a finite stiffness punch and an elastic half-plane, and 2D finite element (FE) models are developed to calculate the contact load assignments. Considering the capsizing moment and stress singularity at the end of the contact interface, an analytic model is established to obtain the contact pressure distribution on each conical contact interface based on the results of contact load assignments. Finally, the numerical examples are given, and the influences of axial load, mating material characteristics, friction coefficient, and cone angle on contact pressure distribution have been discussed in detail, which supplies the guidance of parameters design for Multi-cone friction pair.

25 June 2021
Verified
Conference Paper
Open access
YWYanzhong Wang
Yanzhong Wang
DDDelong Dou
Delong Dou
XMXiangwen Meng
Xiangwen Meng
The temperature plays a vital role in the tribology properties and failures of scuffing and excessive wear during the engagement of wet clutch. The contact pressure distribution and friction heat flux have been calculated based on the combined wear law of the conical joint, and a three-dimensional transient thermal analysis finite element (FE) model with the detailed structure for the multi-conical friction plate is established. The influence of different operating conditions on the highest transient temperature of friction plate is analyzed, and the temperature of the specified location and the radial distribution are given. The results show that the highest temperature appears near the middle of the engagement period and locates at the edge line of the cone top. The temperature of inner conical surface is higher than that of the outer conical surface.

25 February 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
YWYanzhong Wang
Yanzhong Wang
DDDelong Dou
Delong Dou
XDXiaoyan Dong
Xiaoyan Dong
The non-return mechanism is the key device that plays the role of braking in the opening-and-closing electric actuator of an amphibious aircraft hatch door. The ball-and-socket contact pair, providing the pressing force, and the multi-disc friction pair, supplying the braking torque, are two core components in the non-return mechanism. In this paper, the dynamic model of the non-return mechanism is established considering the freedom of rotation-translation. Based on MATLAB/Simulink, the solution framework of the overall dynamic model is built. The dynamic response characteristics of the non-return mechanism in the process of reverse load braking, forward load braking, and continuous closing are analyzed. The braking time and the angular displacement of the output shaft in the braking phase have been presented. Compared with forward load braking, reverse load braking has a longer braking time and smaller angular displacement of the output shaft. In addition, the compaction function of the ball-and-socket contact pair is verified by experiment, and the influence of the cone angle, distribution radius of the ball socket, and the steel ball diameter on the pressing force has been discussed. This study provides a theoretical basis and parametric design platform for the design and optimization of non-return mechanisms, which can shorten the product development time.

2 September 2022 in Research Square
Verified
Preprint
Open access
PDF file
YWYanzhong Wang
Yanzhong Wang
DDDelong Dou
Delong Dou
ZZZhen Zhang
Zhen Zhang
Non-return mechanism is the key device that plays the role of braking in the opening and closing electric actuator of amphibious aircraft hatch door, in which there are two core components, namely ball-and-socket contact pair and multi-disc friction pair. The braking response characteristics of non-return mechanism directly determine the performance and operation safety of the hatch door. In this paper, the dynamic model of non-return mechanism is established considering the freedom of rotation-translation. Based on MATLAB/Simulink, the solution framework of the overall dynamic model is built. The dynamic response characteristics of non-return mechanism in the process of reverse load braking, forward load braking and continuous closing are analyzed. The braking time and the angular displacement of the output shaft in the braking phase have been presented. The simulation demonstrates that three pairs of friction pairs can realize effective braking under the given working conditions. Compared with the forward load braking, the reverse load braking has longer braking time and smaller angular displacement of the output shaft. This study provides a theoretical basis for the design and optimization of non-return mechanism.