The linear anionic class of polysaccharides, glycosaminoglycans (GAGs), are critical throughout the animal kingdom for developmental processes and the maintenance of healthy tissues. They are also of interest as a means of influencing biochemical processes. One member of the GAG family, heparin, is exploited globally as a major anticoagulant pharmaceutical and there is a growing interest in the potential of other GAGs for diverse applications ranging from skin care to the treatment of neurodegenerative conditions, and from the treatment and prevention of microbial infection to biotechnology. To realize the potential of GAGs, however, it is necessary to develop effective tools that are able to exploit the chemical manipulations to which GAGs are susceptible. Here, the current knowledge concerning the chemical modification of GAGs, one of the principal approaches for the study of the structure-function relationships in these molecules, is reviewed. Some additional methods that were applied successfully to the analysis and/or processing of other carbohydrates, but which could be suitable in GAG chemistry, are also discussed.
Many industrial processes make use of sodium because sodium is the fifth most abundant metal and the seventh most abundant element on Earth. Consequently, there are many sodium-containing industrial wastes that could potentially be used for carbon capture, paving the way towards a circular and biobased economy. For example, a common industrial chemical is NaOH, which is found in black liquor, a by-product of the paper and pulp industry. Nonetheless, the literature available on CO2 absorption capacity of aqueous NaOH is scarce for making a fair comparison with sodium-containing waste. Therefore, to fill this gap and set the foundation for future research on carbon capture, the CO2 absorption capacity of NaOH solutions in a concentration range of 1–8 w/w% was evaluated, a wider range compared with currently available data. The data set presented here enables evaluating the performance of sodium-based wastes, which are complex mixtures and might contain other compounds that enhance or worsen their carbon capture capacity. We designed a customized reactor using a 3D-printer to facilitate in-line measurements and proper mixing between phases without the energy of stirring. The mixing performance was confirmed by computational fluid dynamics simulations. The CO2 absorption capacity was measured via weight analysis and the progress of carbonation using a pH meter and an FTIR probe in-line. At 5 w/w% NaOH and higher, the reaction resulted in precipitation. The solids were analyzed with X-ray diffraction and scanning electron microscope, and nahcolite and natrite were identified. With our setup, we achieved absorption capacities in the range of 9.5 to 78.9 g CO2/L for 1 w/w% and 8 w/w% of NaOH, respectively. The results are in fair agreement with previously reported literature, suggesting that non-forced mixing reactors function for carbon capture without the need of stirring equipment and a possible lower energy consumption.
Upon the search for a suitable processing method for cellulose, the dissolution in NaOH(aq) presents a real green potential, including its ability to sorb environmental CO2(g) affecting dissolution. Here, CO2(g) was delivered in a controlled way to the cellulose/NaOH(aq) system during the in-situ analysis with FTIR, pH and temperature meters, resulting in efficient coagulation of cellulose. Surprisingly, the coagulation occurred with a minimal loss of alkalinity. This was considered an effect of a specific interaction between the dissolved polymer and gas, resulting in the introduction of carbonate species, highly influential in the coagulation process. The process repeated at 25 °C and 5 °C suggested a strong influence of temperature. The conversion routes of the CO2(g) coagulant were also related to the dissolved state of the polymer. The recovered cellulose appeared competitive with EtOH recovery in terms of structure. The presented finding put a perspective on the utilisation of both the coagulation process and final materials in cellulose technology.
This work evaluated the hydrodynamic properties of heparin hydrolysed at temperatures ranging from 40 °C to 80 °C in buffered acid and alkaline environments. The correlation between hydrodynamic parameters led to the conclusion that polymer conformational changes appeared to be minimal until chain depolymerisation, initiated at pH 1 and 80 °C. However, the synergy of conformational changes, even if minimal, and sulphate loss observed at pH 1, pH 3 and pH 12 (various temperatures) resulted in a loss of the antifactor Xa activity. Therefore, the ‘contribution’ of conformational changes should be added to the generally recognized effect of desulphation towards the activity of heparin. This is of significance as the processing of medical heparin is complex, and requires adjustment of several physical and chemical factors, including pH and temperature.
Development of transgenic lignocellulosic biomass with increased cell wall accessibility could benefit development of resource efficient biorefinery concepts. Transgenic callose enriched aspen, reported to show an increased cell wall mesoporosity including increased cellulose-lignin distance and improved accessibility to enzymatic hydrolysis, has been assessed for its behaviour in industrially relevant decoupling processes: autohydrolysis mediated extraction and kraft pulping (not performed in sequence). Under mild autohydrolysis conditions (130 °C, initial 20 min of extraction) and during initial mild phase of kraft pulping (10–20 min) this modification indeed led to a modestly but consistently enhanced extractability of wood components of slightly higher molar mass. These results point out the potential of the callose enriched wood for new prospects of mild resource efficient biorefining.