Aerodynamic drag reduction is required with new stringent constraints on pollutant emissions and fuel efficiency of ground vehicles. In this context, active flow control is a promising approach to achieve this target. This study focuses on applying different flow control strategies on the square-back Ahmed model to reduce aerodynamic drag. A steady blowing jet, a synthetic jet and an unsteady jet are located at the back edges of the model as flow control devices. A numerical study based on the 3D WMLES simulation was performed to evaluate the drag reduction capabilities of these devices at different operating conditions. The results showed that a maximum aerodynamic drag reduction of 26.51% was achieved when using a steady blowing jet, and 17.27% with an unsteady jet. In contrast, the effect of the synthetic jet on the aerodynamic drag of the model is solely at high control frequencies.

Traffic congestion is becoming more prevalent as the number of vehicles on the roads continues to rise.To shorten travel times and enhance driver comfort, a range of Advanced Driver Assistance Systems (ADAS) has been developed to assist drivers in urban areas and on highways. The demand for increasing road capacity has introduced the concept of vehicle platooning, where the use of the Adaptive Cruise Control (ACC) system is a key function within the advanced driver assistance (ADAS) technology, this technology manages the vehicle's longitu-dinal control in specific driving conditions. Cars equipped with ACC can efficiently maintain a set distance from the vehicle ahead, easing the driver’s workload while offering advantages such as improved road capacity, lower fuel consumption, and reduced pollution emissions. However, they can be susceptible to string instability, resulting in the amplification of oscillations caused by speed variations along the platoon's rear. This paper presents a string stability analysis of car platoons equipped with ACC system based on a heuristic method by choosing of the constant time headway policy (CTHP). The constant time headway policy selection for string stability is based on the Nyquist diagram of the transfer function of the spacing errors between two cars. A platoon operated by using distance-based ACC control structures is implemented. These structures employ a linear quadratic regulator (LQR) using a dual integrator. The simulation results were acquired by modeling and simulating the studied platoon within Matlab/Simulink.

Metals cover with high thermal conductivity on the top of processors die which calls Integrated Heat Spreader (IHS), The function of this metal plate is for spreading the heat from small area or processors die to the larger area of its surface for the better heat dissipation, then transfer the heat to the various cooling components. In the current technology, the IHS mostly is made of solid copper plate. In high performance processors for super computer producing a power of over 300 Watts requires lower spreading thermal resistance of IHS, however this is limited by the thermal conductivity of copper metal. The average thermal spreading resistance between the processor die and the copper IHS is a significant ratio to overall thermal resistance. This paper presents a newly solution to improve the thermal spreading resistance between processor die and the IHS by using two phase micro channel vapor chamber. The structure of micro channel vapor chamber was designed to utilize the combination of high thermal conductivity in short distance and high speed of vapor spreading in longer distance.

Comparative Study of Drag Reduction of Square-back Vehicle Geometry using Steady blowing and Fluidic Oscillators Method

With the continuous increase in ship size combined with the generally slower increase in the sizes of waterways, the need for the prediction of ship maneuvering in shallow waterways continues to attract attention from the international scientific community. Ship behavior in shallow water is relevant in seabed effects that result in changing the hydrodynamic forces acting on a ship. In this study, the maneuvering characteristics of a container ship with four degrees of freedom in shallow water are analyzed. The Reynolds-Averaged Navier Stokes approach in Ansys Fluent code is used to produce the maneuvering coefficients through the simulations of forward running, static drift, static heel, circular motion, the combined motions, and the pure roll motion of the KRISO container ship. The maneuvering characteristics of the ship are estimated for evaluating the ship behaviors in shallow-water conditions. The obtained results show that the roll has a significant decrease and the ship’s turning diameter has a significant increase when the ship operates in a shallow waterway. The predicted maneuvering characteristics of the ship are in good agreement with those of free-running model tests, indicating that the numerical simulation based on the Computational Fluid Dynamics method has good capability to predict the maneuvering derivatives and the four-DOF ship maneuvering motion in shallow water as well.