Based on the third-order shear deformation theory (TSDT), the investigation of the free vibration response of a continuously graded carbon nanotube-reinforced (CGCNTR) cylindrical shell is presented. The volume fractions of randomly oriented straight single-walled carbon nanotubes are assumed to be graded in the thickness direction. An embedded carbon nanotube in a polymer matrix and its surrounding inter-phase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The Mori–Tanaka scheme as an accurate micromechanics model is used for estimating the homogenized material properties of nanocomposites reinforced with equivalent fibers. The equations of motion and the associated boundary conditions are derived using the Hamilton’s principle based on TSDT. The discretization of the system by means of the Generalized Differential Quadrature Method leads to a standard linear eigenvalue problem. Detailed parametric studies have been carried out to study the impacts of the various types of equivalent fiber distribution, different boundary conditions and geometrical parameters on the vibration characteristics of CGCNTR cylindrical shells. The interesting finding of the present study is that the graded CNT volume fractions with symmetric distribution through the shell thickness have high capabilities to reduce or increase the natural frequency in comparison with uniformly and asymmetric CNT distribution.
1 November 2011 in European Journal of Mechanics - A/Solids
In this paper, a finite element simulation, based on abaqus software is presented for analyzing the temperature history and the residual stress states in multipass welds in stainless steel pipe. The uncoupled thermal–mechanical a three-dimensional (3D) model and a two-dimensional (2D) model are developed. The volumetric heat source with double ellipsoidal distribution for front and rear heat source, proposed by Goldak and Akhlaghi, has also been used. Furthermore, a moving heat source has been modeled by abaqus subroutine DFLUX. A user subroutine FILM has also been used to simulate the combined thermal boundary conditions. The results of both a 3D model and a 2D axisymmetric model which are compared with the available experimental measurements show good agreements. Predictions show that the axial and hoop residual stresses in a 3D model and a 2D axisymmetric model have the same distributions in all locations except the starting point of welding. The effects of welding sequences on the thermal and structural analysis are also investigated. Four types of welding sequences for circular welds of pipe have been used and thermal history and axial and hoop residual stresses are compared. Predictions show that for other locations (except the starting point of welding) there are no important differences of axial and hoop residual stresses for welding sequences and they have the same distribution along axial direction.