Designing heterojunction photocatalysts with matched band structure and good interface contact is an effective method to improve the photoelectrochemical activity. Herein, novel CaIn 2 S 4 /TiO 2 nanotube arrays (NTAs) heterojunction photoanodes were successfully prepared by electrochemical anodization and hydrothermal method. The microstructures, compositions, crystal structures, chemical valence states and light absorption performances of the composites were evaluated by field emission scanning electron microscopy, energy dispersive x-ray spectroscopy transmission electron microscope, high-resolution transmission electron microscope, x-ray diffractometer, x-ray photoelectron spectroscopy and ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS), respectively. The photocathodic protection performances of CaIn 2 S 4 /TiO 2 composites for 316 stainless steel (SS) and the influences of the CaIn 2 S 4 content on the performances were studied. The microstructural examination revealed the uniform doping of CaIn 2 S 4 nanofragments on the TiO 2 NTAs, and the composite was made up cubic CaIn 2 S 4 and anatase TiO 2 . The photogenerated electrons were transferred from the TiO 2 to CaIn 2 S 4 at the interface of the composite. Compared with pure TiO 2 NTAs, CaIn 2 S 4 /TiO 2 NTAs exhibited better photocathodic protection performance for 316 SS under visible light. Potential drop reached 0.78 V versus saturated calomel electrode for the 316 SS coupled with CaIn 2 S 4 /TiO 2 NTAs. The photocurrent density of the 316 SS coupled with the composite photoanode (235.4 μ A cm –2 ) was 17.4 times that of TiO 2 . The improved photocathodic protection property of CaIn 2 S 4 /TiO 2 NTAs was ascribed to the enhanced separation efficiency of the photogenerated carriers and the strong visible light absorption of the material. The CaIn 2 S 4 /TiO 2 NTAs exhibited continuous protection of the 316 SS for more than 12 h even in the dark. Therefore, the CaIn 2 S 4 /TiO 2 NTAs heterojunction composite is an outstanding and efficient photoanode for the photocathodic protection of metals.
To improve the photocathodic protection performance of traditional TiO 2 photoanodes for metals, constructing a Z-scheme heterojunction is one of the most promising and creative strategies. Herein, we fabricated a novel Z-scheme MgIn 2 S 4 nanosheets/TiO 2 nanotube nanocomposite through anodization and hydrothermal method. The optimized Z-scheme MgIn 2 S 4 /TiO 2 nanocomposites exhibited stronger visible light absorption, higher separation efficiency of photoelectrons and photocathodic protection performances in comparison to pure TiO 2 . The theoretical analysis and experimental results show that the Z-scheme heterojunction and oxygen vacancies jointly improved the separation efficiency of photogenerated electron–hole pairs and visible light absorption capacity, thereby improving the photoelectric conversion performance of the MgIn 2 S 4 /TiO 2 nanocomposites. Furthermore, the influence of the precursor solution concentration on the photocathodic protection performances of the composites was investigated. As a result, when the concentration of magnesium source in the precursor solution was 0.06 mmol, the prepared MgIn 2 S 4 /TiO 2 -0.06 displayed the best photocathodic protection performance. In addition, the hydroxyl radicals (·OH) generated in the electron spin resonance (ESR) experiment verified the Z-scheme heterojunction mechanism of the MgIn 2 S 4 /TiO 2 composite, and also demonstrated the excellent redox performance of the composite. This work provides valuable reference for the construction of high-performance Z-scheme heterojunctions for photocathode protection of metals.
CuInSe2 nanoparticles were successfully deposited on the surface of TiO2 nanotube arrays (NTAs) by a solvothermal method for the photocathodic protection (PCP) of metals. Compared with TiO2 NTAs, the CuInSe2/TiO2 composites exhibited stronger visible light absorption and higher photoelectric conversion efficiency. After 316 Stainless Steel (SS) was coupled with CuInSe2/TiO2, the potential of 316 SS could drop to −0.90 V. The photocurrent density of CuInSe2/TiO2 connected to 316 SS reached 140 μA cm−2, which was four times that of TiO2 NTAs. The composites exhibited a protective effect in the dark state for more than 8 h after 4 h of visible light illumination. The above could be attributed to increased visible light absorption, the extended lifetime of photogenerated electrons, and generation of oxygen vacancies.