The function of boundary temperature variation with time, f(t) is generally defined according to measured data. For f(t), which has a complicated expression, a corresponding one-dimensional heat conduction model was constructed under the first type of boundary conditions (Dirichlet conditions) in a semi-infinite domain. By taking advantage of the Fourier transform properties, a theoretical solution was given for the model, under the condition that f(t) does not directly participate in the transformation process. The solution consists of the product of erfc(t) and f(0) and the convolution of erfc(t) and the derivative of f(t). The piecewise linear interpolation equation of f(t), based on the measured data of temperature, was substituted into the theoretical solution, thus quickly solving the model and deriving a corresponding analytical solution. Based on the analytical solution under the linear decay function boundary condition, the inflection point method and curve fitting method for calculating the thermal diffusivity were introduced and exemplified, and the variation laws of the appearance moment of the inflection point were discussed. The obtained results show that the values of thermal diffusivity calculated by the two methods are basically consistent, and that the inflection point values rise with the increasing values of the initial temperature variation of the boundary, the decrease in boundary temperature velocity, and the distance from the boundary, respectively.
The effect of water temperature variation in a river channel on groundwater temperature in the confined aquifer it cuts can be generalized to a one-dimensional thermal convection-conduction problem in which the boundary water temperature rises instantaneously and then remains constant. The basic equation of thermal transport for such a problem is the viscous Burgers equation, which is difficult to solve analytically. To solve this problem, the Cole–Hopf transform was used to convert the second-order nonlinear thermal convection-conduction equation into a heat conduction equation with exponential function-type boundary conditions. Considering the difficulty of calculating the inverse of the image function of the boundary function, the characteristics and properties of the Laplace transform were used to derive the theoretical solution of the model without relying on the transformation of the boundary function, and the analytical solution was obtained by substituting the boundary condition into the theoretical solution. The analytical solution was used to analyze the temperature response laws of aquifers to parameter variation. Subsequently, a 40-day numerical simulation was conducted to analyze the boundary influence range and the results from the analytical method were compared to those from the numerical method. The study shows that: (1) the greater the distance from the river canal and the lower the aquifer flow velocity, the slower the aquifer temperature changes; (2) the influence range of the river canal boundary increases from 18.19 m to 23.19 m at the end of simulation period as the groundwater seepage velocity v increases from 0.08 m/d to 0.12 m/d; (3) the relative errors of the analytical and numerical methods are mostly less than 5%, confirming the rationality of the analytical solution.
For the needs of the whole region’s emergency regulation of the nullah sudden water pollution event, the emergency regulation strategy of the accident section and upstream and downstream of the sudden water pollution event is studied. For the accident section, the duration of the whole emergency event is calculated using the parameter quantification method; for the upstream of the accident section, the NSGA-II is used to adjust the gate opening to ensure the water level stability of the upstream pools; for the downstream section, the optimized partition method is used to identify the unfavorable pools and close the unfavorable pool to extend the water supply time. Based on the example of an emergency event in the section of the Liyanghe gate–Guyunhe gate of the middle line project, the research results are as follows: the accident section is identified as the Xiaohe gate–Hutuohe gate, the upstream of the accident section is the Liyanghe gate–Xiaohe gate, and the downstream of the accident section is the Hutuohe gate–Gangtou Tunnel gate. The duration of the emergency event in the accident section is 7.9 h; the maximum average water level deviation before the gate upstream of the accident section is 0.05 m; two unfavorable canal pools are identified in the stream of the accident section, and the water supply time of the unfavorable pools is extended by 6.13 and 5.61 d.
One-dimensional heat-conduction models in a semi-infinite domain, although forced convection obeys Newton’s law of cooling, are challenging to solve using standard integral transformation methods when the boundary condition φ(t) is an exponential decay function. In this study, a general theoretical solution was established using Fourier transform, but φ(t) was not directly present in the transformation processes, and φ(t) was substituted into the general theoretical solution to obtain the corresponding analytical solution. Additionally, the specific solutions and corresponding mathematical meanings were discussed. Moreover, numerical verification and sensitivity analysis were applied to the proposed model. The results showed that T(x,t) was directly proportional to the thermal diffusivity (a) and was inversely proportional to calculation distance (x) and the coefficient of cooling ratio (λ). The analytical solution was more sensitive to the thermal diffusivity than other factors, and the highest relative error between numerical and analytical solutions was roughly 4% under the condition of 2a and λ. Furthermore, T(x,t) grew nonlinearly as the material’s thermal diffusivity or cooling ratio coefficient changed. Finally, the analytical solution was applied for parameter calculation and verification in a case study, providing the reference basis for numerical calculation under specific complex boundaries, especially for the study of related problems in the fields of fluid dynamics and peridynamics with the heat-conduction equation.
Due to issues such as heat accumulation, the site area, and project investment, the reasonable determination of the hole spacing for heat exchangers has become one of the key design points of the ground-coupled heat pump system. Based on the definition of heat penetration in heat transfer and the research method of the inverse problem, a direct algorithm of the heat penetration distance in the aquifer was proposed using the analytical solution to the mathematical model for one-dimensional heat convection–conduction problems. Taking a vertical ground-coupled heat pump project in Hefei, Anhui Province, China, as an example, a three-dimensional hydro-thermal coupling numerical simulation model was established, and the influence radius during the refrigeration and heating periods under the action of a single borehole heat exchanger was determined. Comparing the heat penetration distance with the influence radius, the results show that the relative errors of the results obtained by the two methods are less than 10%, which verifies the rationality and effectiveness of the calculated penetration distance in the aquifer. At the end of the cooling or heating period, the heat penetration distance in the aquifer is calculated to be 7.59 m. Therefore, the proposed method is straightforward and efficient, which can provide a convenient approach to determining the reasonable hole spacing of the heat pump system.
For heat transfer outside borehole heat exchanger (BHE) arrays in aquifers, existing analytical models mostly adopt Neumann or Robin boundary conditions, whereas constant-temperature (Dirichlet) boundaries are more practical and convenient for monitoring in engineering applications. Considering the coupled effects of heat advection and conduction induced by groundwater seepage, and based on the engineering reality that vertical heat flow is much smaller than horizontal heat flow, this study idealized the BHE array as a constant-temperature boundary and established a one-dimensional simplified model. The advection term of the governing equation was removed through the exponential transformation of the dependent variable, and an analytical solution was derived using Fourier transformation. A three-dimensional coupled hydro-thermal numerical model was established in FEFLOW for validation. The results indicate that relative errors between analytical and numerical solutions remain below 3% outside the BHE array; however, the analytical method is inapplicable inside the array due to significant thermal interference, and independent field validation is precluded by prior thermal disturbances. The proposed solution features fast computation and clear physical interpretation, providing a simple and efficient tool for rapid estimation of temperature variations during preliminary feasibility studies of ground-source heat-pump projects.