Pt-based electrocatalysts are essential to direct methanol fuel cells (DMFCs), but their sluggish reaction kinetics, poor stability, inefficient Pt utilization and susceptibility to CO poisoning hamper the widespread application of DMFCs. Herein, 3.28 nm CoFe@Pt nanoparticles were encapsulated into N-doped carbon shells (CoFe@Pt-NCs) via pyrolysis of polydopamine-coated CoFe2O4 nanoparticles followed by a galvanic displacement reaction. The structures (thickness of NCs, reduction degree, and Pt content) in the CoFe@Pt-NCs were modified by varying the experimental parameters (amount of polydopamine, pyrolysis temperature, and time of the galvanic displacement reaction), to establish a structure–activity relationship between the CoFe@Pt-NCs and the methanol oxidation reaction (MOR) performance. Under optimal conditions, the mass activity (914.80 mA mgPt−1) and specific activity (0.98 mA cmPt−2) of CoFe@Pt-NCs (Pt, 4.39 wt%) were 3.3 and 2.6 times higher than those of Pt/C, respectively. Moreover, the peak potential of the CO electrooxidation was negatively shifted by 104 mV compared with Pt/C. After carrying out chronoamperometry measurements, the current density of the CoFe@Pt-NCs was 3.3 times greater than that of Pt/C. The prominent MOR performance of the CoFe@Pt-NCs is attributed to the confinement and anchoring effects, as well as to the ion/electron transport of the three-dimensional porous NCs and the modulation effects of CoFe on Pt in conjunction with the high dispersion of Pt (small particle size, low Pt content). Our work might pave the way for a controllable and facile strategy that involves the integration of multiple strategies to improve the performance of Pt-based electrocatalysts for the MOR.
29 April 2023 in International Journal of Hydrogen Energy
Pt-based catalysts play a significant role in the advancement of direct methanol fuel cells (DMFCs). However, their inefficient reaction kinetics, low resistance to CO poisoning, and unstable performance hinder the commercialization of DMFCs. To address these issues and enhance both the catalytic efficiency and stability of Pt-based catalysts for the methanol oxidation reaction (MOR), in this work MnO–Co@Pt nanocomposites were prepared by encapsulating them into N-doped porous carbon (NPC), which was confirmed through physicochemical characterizations, such as HR-TEM, XRD, and XPS. The catalyst structures were controllably synthesized by adjusting the calcination temperature and reaction time of galvanic replacement. MnO–Co@Pt NPCs demonstrated significantly improved performance compared to Pt/C catalysts for the MOR. The mass activity of 925.72 mA mgPt−1 and current density after a 3600 s I–t test of MnO–Co@Pt NPC 800 15 min 15% were 3.3 times and 3.8 times higher than those of the Pt/C catalyst, respectively. The peak potential of CO electrooxidation exhibited a negative shift of 73 mV when compared with the Pt/C catalyst. The exceptional MOR performance of MnO–Co@Pt NPCs can be attributed to the binding and encapsulation effects of the NPCs, which facilitate the isolation, preventing the sintering and expansion of MnO–Co@Pt nanoparticles. This study not only presents a simple method for developing low Pt nanostructures but also offers possibilities for designing nanocomposites with carbon protection layers and coated catalysts incorporating different transition metals. These advancements significantly improve the performance of Pt-based electrocatalysts for the MOR process.
11 November 2019 in Journal of Polymer Science Part A: Polymer Chemistry
Side-chain type sulfonated poly(phenylquinoxaline) (SPPQ)-based proton exchange membranes (PEMs) with different ionic exchange capacity (IEC) were successfully synthesized by copolymerization from 4,4′-bis (2-diphenyletherethylenedione) diphenyl ether, 4,4′-bis (2-phenylethylenedione) diphenyl ether and 3,3′,4,4′-tetraaminobiphenyl, and post-sulfonation process. The sulfonic acid groups were precisely grafted onto the p-position of phenoxy groups in the side chain of PPQ after the convenient condition of the post-sulfonation process, which was confirmed by 1H NMR spectra and FTIR. The sulfonic acid groups of side-chain type SPPQ degraded at around 325 °C, and their maximum stress was higher than 47 MPa, indicating great thermal and mechanical stability. The water uptake increased with the increasing IEC and temperature. The size change in their plane direction was shown to be lower than 6%, indicating the stability of membrane electrode assembly. The SPPQ PEMs displayed higher proton conductivity than that of main chain. In the single cell test, the maximum power density of side-chain type SPPQ-5 was 63.8 mW cm−2 at 20 wt% methanol solution and O2 at 60 °C, which is largely higher than 18.4 mW cm−2 of NR212 under the same conditions. The SPPQ PEMs showed high performance (62.8 mW cm−2) even when the methanol concentration was as high as 30 wt%.