Atmospheric motion vectors (AMVs), derived by tracking patterns, represent the winds in a layer characteristic of the pattern. AMV height (or pressure), important for applications in atmospheric research and operational meteorology, is usually assigned using observed IR brightness temperatures with a modeled atmosphere and can be inaccurate. Stereoscopic tracking provides a direct geometric height measurement of the pattern that an AMV represents. We extend our previous work with multi-angle imaging spectro–radiometer (MISR) and GOES to moderate resolution imaging spectroradiometer (MODIS) and the GOES-R series advanced baseline imager (ABI). MISR is a unique satellite instrument for stereoscopy with nine angular views along track, but its images have a narrow (380 km) swath and no thermal IR channels. MODIS provides a much wider (2330 km) swath and eight thermal IR channels that pair well with all but two ABI channels, offering a rich set of potential applications. Given the similarities between MODIS and VIIRS, our methods should also yield similar performance with VIIRS. Our methods, as enabled by advanced sensors like MODIS and ABI, require high-accuracy geographic registration in both systems but no synchronization of observations. AMVs are retrieved jointly with their heights from the disparities between triplets of ABI scenes and the paired MODIS granule. We validate our retrievals against MISR-GOES retrievals, operational GOES wind products, and by tracking clear-sky terrain. We demonstrate that the 3D-wind algorithm can produce high-quality AMV and height measurements for applications from the planetary boundary layer (PBL) to the upper troposphere, including cold-air outbreaks, wildfire smoke plumes, and hurricanes.
The first innovative Visible Infrared Imaging Radiometer Suite (VIIRS) sensor aboard the Suomi National Polar-orbiting Partnership (SNPP) satellite has been in operation for 10 years since its launch on 28 October 2011. The second VIIRS sensor aboard the first Join Polar Satellite System (JPSS-1) satellite has been in operation for 4 years since its launch on 18 November 2017, which became NOAA-20. Well-geolocated and radiometrically calibrated Level-1 sensor data records (SDRs) from VIIRS are crucial to numerical weather prediction (NWP) and Level-2+ environmental data record (EDR) algorithms and products. The high quality of Level-2+ EDRs is a requirement for the continuity of NASA Earth science data records (ESDRs) and climate data records (CDRs), one of the two objectives of the SNPP mission and one of the three elements in the JPSS mission objective. The other objective of the SNPP mission is risk reduction for the follow-on JPSS missions. This paper summarizes the on-orbit geolocation calibration and validation (Cal/Val) activities for both VIIRS sensors onboard SNPP and NOAA-20 in the past 10 years. These activities include nominal geolocation Cal/Val activities, risk reduction activities, and improvements for the on-orbit VIIRS sensor operations. After these activities, sub-pixel geolocation accuracy is achieved. Nadir equivalent geolocation uncertainty is generally within 75 m (1-σ), or 20% imagery band pixels, in either the along-scan or along-track direction for both SNPP and NOAA-20 VIIRS sensors. The worst 16-day measured geolocation errors (radial, 3-σ) are 280 m and 267 m, respectively, in the latest SNPP and NOAA-20 VIIRS data collections, which are better than the required accuracy of 375 m (radial, 3-σ). The risk reduction activities also improved VIIRS builds for JPSS-3 and JPSS-4 satellites, and provide lessons learned for other VIIRS-like sensor builds.
The Geostationary Operational Environmental Satellite R-series (GOES-R) satellites, including GOES-16 and GOES-17, are the latest generation of GOES series satellites. The GOES-R series are the collaborative development efforts of the National Oceanic and Atmospheric Administration (NOAA) and the National Aeronautics and Space Administration (NASA). The Advanced Baseline Imager (ABI) is the primary instrument on the GOES satellites. ABI has significantly improved temporal and spatial resolutions from the imagers on previous GOES-NOP satellites. GOES-R ABI has 16 channels (bands) on three focal planes: visible/near-infrared (VNIR), midwave infrared (MWIR), and long-wave infrared (LWIR). The nadir spatial resolution ranges from 0.5 to 1 km in the visible channels and 1 to 2 km in the infrared channels. ABI level 1B (L1B) images are radiometrically calibrated and then rectified to the ABI-fixed grid coordinate system, which is a two-dimensional (2-D) angle space centered at the assigned location of the satellite in geosynchronous orbit.1 ABI has columns of detectors for each spectral channel, and it scans the fields of view of these detectors in a west to east direction to acquire swaths of Earth imagery. Each ABI L1B image is composed of two or more swaths, each swath having an effective angular height in the GOES fixed-grid of about 0.8 deg. During nominal operations, ABI produces a full disk (FD) image composed of 22 swaths every 10 to 15 min, a Conterminous US (CONUS) image composed of six swaths every 5 min, and a mesoscale (MESO) image composed of two swaths every 30 s. The FD is a circle of 17.4 deg angular diameter with center at nominal satellite nadir and circumference at the Earth limb. The CONUS images are rectangular and have a nadir extent of 5000 km in the east–west (EW) direction and 3000 km in the north–south (NS) direction. The MESO image can be acquired at any location and is also rectangular and has an extent of .2 The advanced temporal and spatial resolutions make ABIs a promising data source for imaging Earth’s surface and atmosphere. ABI data are used not only for weather forecasting but also for the detection and observation of severe environmental phenomena and climate change studies.3
26 September 2016 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The visible infrared imaging radiometer suite (VIIRS) instrument onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite was launched on October 28, 2011. The VIIRS instrument is a whiskbroom system with 22 spectral and thermal bands split between 16 moderate resolution bands (M-bands), 5 imagery resolution bands (I-bands), and a day-night band. In this study, we measure the along-scan and along-track band-to-band registration between the I-bands and M-bands from on-orbit data. This measurement is performed by computing the normalized mutual information (NMI) between shifted image band pairs and finding the amount of shift required (if any) to produce the peak in NMI value. Subpixel accuracy is obtained by utilizing a bicubic interpolation. The product of the NMI peak slope and the NMI peak value is shown to be a better criterion for evaluating the quality of the NMI result than just the NMI peak value. Registration shifts are found to be similar to prelaunch measurements and stable (within measurement error) over the instrument's first four years in an orbit.
Stereo tracking of clouds from multiple satellites permits the simultaneous retrieval of an atmospheric motion vector (“wind”) and its height in the atmosphere. The direct measurement of height is a major advantage of stereo methods over observations made from a single satellite where the height must be inferred from infrared brightness temperatures. A pair of operational geostationary satellites over the Americas provides stereo coverage where their two fields of view intersect. Stereo coverage can be extended to nearly a full hemisphere with a third satellite. We demonstrate this configuration with the operational GOES-R constellation of GOES-16 (east) and GOES-17 (west) augmented by GOES-18 in its central test slot and use the 500-m resolution Advanced Baseline Imager Band 2. We examine the consistency of the pairwise products created from GOES-18 and -16 versus GOES-18 and -17 and create a fused triple-GOES product that spans nearly the full hemisphere seen from GOES-18. We also examine the retrieval of ground points observed under clear skies and compare their retrievals to zero speed and known terrain heights. The results are compatible with a wind accuracy about 0.1 m/s with height assignment uncertainty of 175 m.
We have developed a set of geometric standards for assessing earth observing data products derived from space-borne remote sensors. We have worked with the European Space Agency (ESA) Earthnet Data Assessment Pilot (EDAP) project to provide a set of guidelines to assess geometric performance in data products from commercial electronic-optical remote sensors aboard satellites such as those from Planet Labs. The guidelines, or the standards, are based on performance from a few NASA procured sensors, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) sensors, the Visible Infrared Imaging Radiometer Suite (VIIRS) sensors and the Advanced Baseline Imager (ABI) sensors. The standards include sensor spatial response, absolute positional accuracy, and band-to-band co-registration. They are tiered in “basic”, “intermediate” and “goal” criteria. These are important geometric factors affecting scientific use of remote sensing data products. We also discuss possible approaches achieving the highest goal in geometric performance standards.