Gökhan ÖZDEMİR

Prof. Dr. Gökhan ÖZDEMİR


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2023 in Buildings
Verified
Journal Article
Open access
PDF file
CYCansu Yasar
Cansu Yasar
VKVolkan Karuk
Volkan Karuk
OKOnur Kaplan
Onur Kaplan
ECEsengul Cavdar
Esengul Cavdar
GÖGökhan ÖZDEMİR
Gökhan ÖZDEMİR
In this paper, new formulations to predict the change in mechanical properties, namely, post-yield stiffness and characteristic strength of lead rubber bearings (LRBs) at low ambient temperatures, are proposed based on test results. Proposed formulations consider not only the effect of low temperature but also the effect of exposure time to low temperature. Accordingly, a full-scale LRB was tested dynamically after being conditioned at temperatures of −20, −10, 0, and 20 °C for 3, 6, and 24 h. During the displacement-controlled cyclic tests, various levels of shear strain were applied to the isolator with loading frequencies of 0.1 Hz and 0.5 Hz. Then, force-displacement curves of LRB were recorded, and the corresponding amplifications in its hysteretic properties were noted. The accuracy of existing equations to estimate the amount of amplification in mechanical properties was evaluated through the experimental results. It was found that the existing formulas do not represent the effect of exposure time on LRB characteristics at low temperatures. On the other hand, the proposed equations result in highly accurate estimations of post-yield stiffness and characteristic strength of LRB at low temperatures for different exposure times.


1 September 2022 in Teknik Dergi
Verified
Journal Article
Closed access
PDF file
EÇEsengül Çavdar
Esengül Çavdar
GÖGökhan ÖZDEMİR
Gökhan ÖZDEMİR
VKVolkan Karuk
Volkan Karuk
This study investigates the response modification in a bridge seismically isolated with lead rubber bearings (LRBs), due to change of ambient temperature from 20oC to -30oC. Accordingly, a large-size LRB was tested after conditioned at corresponding temperatures and change in its hysteretic properties was noted. Use of analytical tool in modeling nonlinear response of the tested LRB was justified by comparing the experimentally and analytically obtained force-displacement curves. Then, verified analytical representation of LRB was employed in nonlinear response history analyses conducted to quantify the change in response of a representative LRB isolated bridge when subjected to bidirectional ground motion excitations at 20°C and -30°C. Analyses results are also employed to assess the use of property modification factor, , to change isolator properties in order to represent low temperature behavior. It is revealed that for the selected ground motion records, the average isolator force remains almost the same for both ambient temperatures. Moreover, using property modification factor will result in accurately estimated isolator displacements, but overestimated isolator forces, in an average sense.

6 April 2018 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Verified
Journal Article
Closed access
PDF file
EÇEsengül Çavdar
Esengül Çavdar
GÖGökhan ÖZDEMİR
Gökhan ÖZDEMİR
Bu çalışmada, sismik taban izolasyonu uygulaması kurşun çekirdekli kauçuk izolatörler (KÇKİ) kullanılarak gerçekleştirilen tipik bir yapıda, maksimum izolatör deplasmanlarındaki (MİD) değişim deprem etkime açısına bağlı olarak incelenmiştir. Bu amaçla, seçilen deprem kayıtlarının orijinal halleri 10º aralıklarla 180º boyunca döndürülerek aynı deprem hareketinin farklı etkime açılarına sahip versiyonları oluşturulmuştur. Yürütülen doğrusal olmayan dinamik analizlerde, dikkate alınan deprem hareketine ait her iki yatay deprem bileşeni oluşturulan yapısal modele eş zamanlı olarak tatbik ettirilmiştir. Analizlerde kullanılan deprem hareketleri, yakın saha kaynaklı kayıtlar arasından seçilmiş olup, tasarım deprem (TD) ve maksimum deprem (MD) seviyelerini temsil edecek şekilde ölçeklendirilmiştir. Analizlerde, maruz kalınan harekete bağlı olarak KÇKİ’nin histeretik eğrilerinde, kurşun çekirdekteki ısınmaya bağlı, dayanım kaybını dikkate alabilen malzeme modeli kullanılmıştır. Ayrıca, incelemeye konu olan deprem etkime açısına bağlı MİD’deki değişimin izolasyon periyoduna olan hassasiyetini belirleyebilmek adına dört farklı özellikte izolatör tasarlanmıştır. Yapılan analizler sonucunda, orijinal deprem kayıtlarının döndürülmesi sonucu MİD’deki artışın ihmal edilebilir seviyede (ortalama olarak %2 mertebesinde) olduğu gözlenmiştir. Bu artış miktarının TD ve MD seviyeleri için farklılaşmadığı tespit edilmiştir. Ayrıca, deprem hareketinin farklı etkime açısına bağlı olarak ortaya çıkan MİD’deki artışın, izolasyon periyodundaki değişimden etkilenmediği görülmüştür.

Verified
Open access
PDF file
GÖGökhan ÖZDEMİR
Gökhan ÖZDEMİR
UAUgurhan Akyuz
Ugurhan Akyuz
Nonlinear response history analyses (NRHA) of a 3-story isolated reinforced concrete (RC) building are carried out under both uni- and bi-directional earthquake excitations of near-field records. NRHA are conducted for a wide range of yield strength (Q/W) of lead rubber bearings (LRB), and isolation period (T). Selected near-field records are used to investigate both the contribution of orthogonal components on maximum isolator displacements and accuracy of equivalent lateral force (ELF) procedure on estimation of maximum isolator displacements. Analyses results show that both the contribution of orthogonal components and accuracy of ELF procedure depend on the soil condition where isolation system is implemented.