Stefania Mottola

Dr. Stefania Mottola

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 December 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Antonietta MancusoAntonietta Mancuso
Antonietta Mancuso
SMStefania Mottola
Stefania Mottola
Olga SaccoOlga Sacco
Olga Sacco
Vincenzo VaianoVincenzo Vaiano
Vincenzo Vaiano
Iolanda De MarcoIolanda De Marco
Iolanda De Marco
Heterogeneous photocatalysis is a promising technique for removing pollutants from water. In this work, supercritical antisolvent (SAS)-micronized ZnO (ZnOSAS) is coupled with commercial anatase TiO2 (PC50) to study the photocatalytic degradation of ceftriaxone under UV and visible light. Diffuse ultraviolet–visible reflectance (UV−vis DRS) measurement revealed that the presence of ZnO leads to a slight absorption in the visible region. Wide-angle X-ray diffraction (WAXD) analysis showed the presence of both ZnO wurtzite and TiO2 anatase crystalline phases in the composite. Photocatalytic tests proved that the activity of the ZnOSAS/PC50 composite is higher than that of commercial ZnO, SAS-micronized ZnO, and PC50, allowing complete ceftriaxone degradation under UV light after only 2 min of irradiation time. In contrast, about 90% of ceftriaxone degradation is achieved after 180 min of visible-light irradiation. The photocatalytic results for an experiment carried out in the presence of probe scavenger molecules for reactive oxygen species show that hydroxyl radicals and positive holes are both reactive species involved in the ceftriaxone photocatalytic degradation mechanism. Finally, reuse cycles of the ZnOsas/PC50 composite are performed, demonstrating the stability and recyclability of the photocatalyst.

Verified
Journal Article
Open access
PDF file
SMStefania Mottola
Stefania Mottola
GIANLUCA VISCUSIGIANLUCA VISCUSI
GIANLUCA VISCUSI
GIGiovanna Iannone
Giovanna Iannone
Raffaella BelvedereRaffaella Belvedere
Raffaella Belvedere
APAntonello Petrella
Antonello Petrella
Giuliana GorrasiGiuliana Gorrasi
Giuliana Gorrasi
Fibrous membranes of thermoplastic polyurethane (TPU) were fabricated through a uni-axial electrospinning process. Fibers were then separately charged with two pharmacological agents, mesoglycan (MSG) and lactoferrin (LF), by supercritical CO2 impregnation. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analysis proved the formation of a micrometric structure with a homogeneous distribution of mesoglycan and lactoferrin. Besides, the degree of retention is calculated in four liquid media with different pHs. At the same time, angle contact analysis proved the formation of a hydrophobic membrane loaded with MSG and a hydrophilic LF-loaded one. The impregnation kinetics demonstrated a maximum loaded amount equal to 0.18 ± 0.20% and 0.07 ± 0.05% for MSG and LT, respectively. In vitro tests were performed using a Franz diffusion cell to simulate the contact with the human skin. The release of MSG reaches a plateau after about 28 h while LF release leveled off after 15 h. The in vitro compatibility of electrospun membranes has been evaluated on HaCaT and BJ cell lines, as human keratinocytes and fibroblasts, respectively. The reported data proved the potential application of fabricated membranes for wound healing.

30 July 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
SMStefania Mottola
Stefania Mottola
Antonietta MancusoAntonietta Mancuso
Antonietta Mancuso
Olga SaccoOlga Sacco
Olga Sacco
Vincenzo VaianoVincenzo Vaiano
Vincenzo Vaiano
Iolanda De MarcoIolanda De Marco
Iolanda De Marco
Emerging contaminants are a significant issue in the environment. Photocatalysis is proposed as a solution for the degradation of pollutants contained in wastewater. In this work, ZnO-based photocatalysts have been produced and tested for the photocatalytic degradation of an antibiotic; specifically, ceftriaxone has been used as a model contaminant. Moreover, there is particular interest in combining small-size ZnO particles and β-cyclodextrin (β-CD), creating a hybrid photocatalyst. Zinc acetate (ZnAc) (subsequently calcinated into ZnO) and β-CD particles with a mean diameter of 0.086 and 0.38 µm, respectively, were obtained using the supercritical antisolvent process (SAS). The produced photocatalysts include combinations of commercial and micronized particles of ZnO and β-CD and commercial and micronized ZnO. All the samples were characterized through UV–Vis diffuse reflectance spectroscopy (DRS), and the band gap values were calculated. Raman and FT-IR measurements confirmed the presence of ZnO and the existence of functional groups due to the β-cyclodextrin and ZnO combination in the hybrid photocatalysts. Wide-angle X-ray diffraction patterns proved that wurtzite is the main crystalline phase for all hybrid photocatalytic systems. In the photocatalytic degradation tests, it was observed that all the photocatalytic systems exhibited 100% removal efficiency within a few minutes. However, the commercial ZnO/micronized β-CD hybrid system is the photocatalyst that shows the best performance; in fact, when using this hybrid system, ceftriaxone was entirely degraded in 1 min.

7 September 2022 in Molecules
Verified
Journal Article
Open access
PDF file
Sara LiparotiSara Liparoti
Sara Liparoti
SMStefania Mottola
Stefania Mottola
GIANLUCA VISCUSIGIANLUCA VISCUSI
GIANLUCA VISCUSI
Raffaella BelvedereRaffaella Belvedere
Raffaella Belvedere
APAntonello Petrella
Antonello Petrella
Iolanda De MarcoIolanda De Marco
Iolanda De Marco
The development of targeted therapies for wound repair is knowing a growing interest due to the increasing aging of the population and the incidence of chronic pathologies, mainly pressure ulcers. Among molecules recruiting cell populations and promoting the formation of new vital tissue, sodium mesoglycan (MSG) has been proven to be effective in wound healing. In this work, MSG impregnation of polymer matrices has been attempted by a supercritical carbon dioxide-based process. Polymeric matrices are composed of polycaprolactone blends, where water-soluble polymers, polyethylene glycol, polyvinyl pyrrolidone, gelatin, and thermoplastic starch, have been employed to modulate the MSG release, making the devices potentially suitable for topical administrations. Two different techniques have been used to obtain the films: the first one is compression molding, producing compact and continuous structures, and the second one is electrospinning, producing membrane-like designs. A higher amount of MSG can be loaded into the polymeric matrix in the membrane-like structures since, in these films, the impregnation process is faster than in the case of compression molded films, where the carbon dioxide has firstly diffused and then released the active molecule. The type of water-soluble polymer influences the drug release rate: the blend polycaprolactone-gelatin gives a prolonged release potentially suitable for topical administration.

20 December 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SMStefania Mottola
Stefania Mottola
Iolanda De MarcoIolanda De Marco
Iolanda De Marco
In this study, corticosteroid–β-cyclodextrin (β-CD) inclusion complexes were prepared by using supercritical antisolvent (SAS) precipitation to enhance the dissolution rate of dexamethasone (DEX) and prednisolone (PRED), which are poorly water soluble drugs. The processing of the active principles in the absence of a carrier led to their almost complete extraction (the small amount of obtained material precipitates in the form of crystals). The coprecipitation of the ingredients in the presence of β-CD was investigated at different concentrations, pressures, and molar ratios. For both the corticosteroids, the optimized operating conditions were 40 °C, 120 bar, an equimolar ratio, and a concentration in DMSO of 20 mg/mL; these conditions led to the attainment of microparticles with mean diameters equal to 0.197 ± 0.180 μm and 0.131 ± 0.070 μm in the case of DEX and PRED, respectively. Job’s method confirmed the formation of inclusion complexes with a 1/1 mol/mol ratio. Compared to the pure ingredients, the obtained powders have an improved release rate, which is about three times faster in both cases. The release curves obtained under the best operating conditions were fitted using different models. The best fitting was obtained using the Weibull model, whose parameters are compatible with a combined release mechanism involving Fickian diffusion and controlled release.

23 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SMStefania Mottola
Stefania Mottola
Iolanda De MarcoIolanda De Marco
Iolanda De Marco
Antioxidants are contained in fruits and vegetables and are commonly obtained through food. However, it is frequently necessary to supplement the diet with substances that are often poorly soluble in water and sensitive to light and oxygen. For this reason, in this work, luteolin (LUT) and naringenin (NAR), two compounds with antioxidant activity and potential health benefits, were precipitated through the supercritical antisolvent technique using polyvinylpyrrolidone and β-cyclodextrin as the carriers. The precipitation occurred from dimethylsulfoxide using supercritical carbon dioxide as the antisolvent. The influence of pressure (9–12 MPa), active substance/carrier concentration in the solution (20–200 mg/mL), and their ratio (1/1 and 1/2 mol/mol) on morphology, particle mean size, and distribution were investigated. Under the optimized operating conditions, spherical microparticles with a mean diameter equal to 2.7 ± 0.9 μm (for LUT) and 5.5 ± 1.9 μm (for NAR) were obtained. The active ingredients were protected from the external environment by the presence of the carrier, and the dissolution rate was notably increased by processing them with β-cyclodextrin. It was sixty times faster and three times faster than that of the antioxidant alone for LUT and NAR, respectively.