For the Paulownia Clone in vitro 112 hybrid to be used in the wood industry, it is necessary to know its basic properties. Its air dry density of 231 kg/m3 is nearly 20% lower than that of Paulownia tomentosa. Its average compressive strength is 19.9 MPa, its shear strength is 4.1 MPa, the static modulus of rupture (MOR) is 32.3 MPa, and the modulus of elasticity (MOE) is 3800 MPa. Its volumetric shrinkage is 8.47%, with longitudinal 0.6%, radial 3.2% and tangential 5.0%. The ratio of tangential to radial shrinkage is very favorable, just 1.6.
Among fast-growing wood species, poplars (Populus spp.) can be grown well. Thanks to their valuable wood, they also play an important role in the world. In Europe, regarding poplar forest areas, Hungary is ranked second, where the territorial proportion of poplars has not changed in the past ten years, and currently, two-thirds of them are constituted by two species. The proportion of grey poplar (P. × canescens) is 42%, while the proportion of ’Pannonia’ hybrid (P. × euramericana cv. Pannonia) is 22%. With regard to gross wood production, they are second after black locust (Robinia pseudoacacia), and their standing tree volume is significant for up to 30 years of age. The average age of hybrid poplars is 21 years, while that of the natives is 26 years. Its wood is used by the packaging industry (pallets and boxes) and the furniture industry (700,000 m3), the plywood industry (200,000 m3), and the fiber industry (300,000 m3), but it is also an important source for energetic purposes (150,000 m3).
Because invasive tree species are being suppressed all over the world, there is a lack of basic information needed for their use in the processing industry. One piece of important information for woodworking applications is the air-dry density, which is 653 kg/m3 in the case of tree of heaven (Ailanthus altissima), 536 kg/m3 for box elder (Acer negundo), and 702 kg/m3 for green ash (Fraxinus pennsylvanica). The order of the 3 species is the same for oven-dry and basic density. In terms of compression and bending, tree of heaven has higher values than green ash. Because the strength of the tree of heaven and the green ash are largely the same as the common ash (Fraxinus excelsior), it can be replaced by these tree species. The properties of box elder wood are significantly different from those of sycamore (Acer pseudoplatanus), so this tree species is not suitable for replacement.
Besides the continuously increasing demand for wood, the significant increase in its price also contributes to the increasingly broader use of fast-growing wood species and cultivars. Newer variants are continue to be cross-bred as a result. In case of a new variant within a species, it is questionable how it would adapt to a particular climatic environment and the quality of wood it would yield. The characteristics of the Paulownia tomentosa (Robust4) wood obtained from Hungarian plantations of are generally identical to those of the Paulownia tomentosa. The value of the air dry density - as typically for paulownia species- are very low i.e. 273 kg/m3. Its strength values (compressive strength: 9,6 MPa; tensile strength: 39,3 MPa; bending strength: 41,7 MPa; modulus of elasticity: 4116 MPa; impact bending strength: 1,4 J/cm2) also reach, and in some cases, exceed those of the Paulownia tomentosa (Thunb.) Steud. and the Paulownia Clone in vitro 112 variant. Based on these, we can expect the same wood quality from the Robust4 version as from the other paulownia variants.
Invasive tree species remain underused in European forests despite timber demand. Box elder and green ash have potential as alternatives to native hardwoods, but their outdoor suitability remains insufficiently understood. This study evaluated whether thermal modification could improve their aesthetic value, dimensional stability, and durability. Wood was modified at 180 and 200 °C in an oxidative atmosphere and tested for wood–water relations, mechanical properties, color, and durability. Thermal modification caused pronounced darkening with a total color change ΔE* of 37.1–56.3 and a slight density decrease of 3.5–7.2%. Equilibrium moisture content decreased by 43–60%, and anti-swelling efficiency ranged from 18.6% to 45.9% depending on species, direction, and temperature, whereas swelling coefficients and anisotropy remained unaffected. Compressive strength and modulus of elasticity did not decrease, while static bending strength decreased by up to 38% (51% at equivalent moisture content) and impact bending strength dropped by up to 70% (74% after moisture correction) at 200 °C. Fungal decay mass loss dropped to 3.1–12.7%, upgrading green ash to durability class 2 and box elder to class 3 under EN 350. Theoretical estimates suggest that the reduced operating moisture content can effectively counterbalance cell wall degradation, indicating that 200 °C modification successfully enhances the value and outdoor potential of both species.