Radio frequency identification (RFID) and wireless sensors networks (WSNs) are two fundamental pillars that enable the Internet of Things (IoT). RFID systems are able to identify and track devices, whilst WSNs cooperate to gather and provide information from interconnected sensors. This involves challenges, for example, in transforming RFID systems with identification capabilities into sensing and computational platforms, as well as considering them as architectures of wirelessly connected sensing tags. This, together with the latest advances in WSNs and with the integration of both technologies, has resulted in the opportunity to develop novel IoT applications. This paper presents a review of these two technologies and the obstacles and challenges that need to be overcome. Some of these challenges are the efficiency of the energy harvesting, communication interference, fault tolerance, higher capacities to handling data processing, cost feasibility, and an appropriate integration of these factors. Additionally, two emerging trends in IoT are reviewed: the combination of RFID and WSNs in order to exploit their advantages and complement their limitations, and wearable sensors, which enable new promising IoT applications.

This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding’s environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.

A design study of coil antennas aimed to be used as Interrogators in high-frequency (HF) radio frequency identification (RFID) is presented. The magnetic field (H-field) of the coil is enhanced by defining optimally the number of turns of the antenna, and optimizing and exploiting the internal area of an initial coil. The distributed turns coil antennas are designed for highest possible H-field without compromising the Q-factor of the antenna with respect to an initial design. To achieve best solution, a non-uniformly distributed turns design is proposed and whose radiating elements are formulated accordingly. The analytical and simulated results show reasonable agreement to validate the designs. The enhanced H-field of the antenna shows an unconstrained Q-factor, indicates a potential rise to the interrogating coverage and as a result a higher efficient antenna.

This paper describes a telematic system based on an intelligent van which is capable of tracing pharmaceutical drugs over delivery routes from a warehouse to pharmacies, without altering carriers’ daily conventional tasks. The intelligent van understands its environment, taking into account its location, the assets and the predefined delivery route; with the capability of reporting incidences to carriers in case of failure according to the established distribution plan. It is a non-intrusive solution which represents a successful experience of using smart environments and an optimized Radio Frequency Identification (RFID) embedded system in a viable way to resolve a real industrial need in the pharmaceutical industry. The combination of deterministic modeling of the indoor vehicle, the implementation of an ad-hoc radiating element and an agile software platform within an overall system architecture leads to a competitive, flexible and scalable solution.

We propose a multi-crossover and adaptive island based population algorithm (MAIPA). This technique divides the entire population into subpopulations, or demes, each with a different crossover function, which can be switched according to the efficiency. In addition, MAIPA reverses the philosophy of conventional genetic algorithms. It gives priority to the autonomous improvement of the individuals (at the mutation phase), and introduces dynamism in the crossover probability. Each subpopulation begins with a very low value of crossover probability, and then varies with the change of the current generation number and the search performance on recent generations. This mechanism helps prevent premature convergence. In this research, the effectiveness of this technique is tested using three well-known routing problems, i.e., the traveling salesman problem (TSP), capacitated vehicle routing problem (CVRP), and vehicle routing problem with backhauls (VRPB). MAIPA proves to be better than a traditional island based genetic algorithm for all these three problems.

Radio Frequency Identification (RFID) is a technology that uses radio frequency signals to identify objects. RFID is one of the key technologies used by the Internet of Things (IoT). This technology enables communication between the main devices used in RFID, the reader and the tags. The tags share a communication channel. Therefore, if several tags attempt to send information at the same time, the reader will be unable to distinguish these signals. This is called the tag collision problem. This results in an increased time necessary for system identification and energy consumption. To minimize tag collisions, RFID readers must use an anti-collision protocol. Different types of anti-collision protocols have been proposed in the literature in order to solve this problem. This paper provides an update including some of the most relevant anti-collision protocols.