The coronavirus disease 2019 (COVID-19) rapidly spread to over 180 countries and abruptly disrupted production rates and supply chains worldwide. Since then, 3D printing, also recognized as additive manufacturing (AM) and known to be a novel technique that uses layer-by-layer deposition of material to produce intricate 3D geometry, has been engaged in reducing the distress caused by the outbreak. During the early stages of this pandemic, shortages of personal protective equipment (PPE), including facemasks, shields, respirators, and other medical gear, were significantly answered by remotely 3D printing them. Amidst the growing testing requirements, 3D printing emerged as a potential and fast solution as a manufacturing process to meet production needs due to its flexibility, reliability, and rapid response capabilities. In the recent past, some other medical applications that have gained prominence in the scientific community include 3D-printed ventilator splitters, device components, and patient-specific products. Regarding non-medical applications, researchers have successfully developed contact-free devices to address the sanitary crisis in public places. This work aims to systematically review the applications of 3D printing or AM techniques that have been involved in producing various critical products essential to limit this deadly pandemic’s progression.
Laser-welding is a promising technique for welding NiTi shape memory alloys with acceptable tensile strength and comparable corrosion performance for biomedical applications. The microstructural characteristics and localized corrosion behavior of NiTi alloys in a simulated body fluid (SBF) environment are evaluated. A microstructural examination indicated the presence of fine and equiaxed grains with a B2 austenite phase in the base metal (BM), while the weld metal (WM) had a coarse dendritic microstructure with intermetallic precipitates including Ti2Ni and Ni4Ti3. The hardness decreased from the BM to the WM, and the average hardness for the BM was 352 ± 5 HV, while it ranged between 275 and 307 HV and 265 and 287 HV for the HAZ and WM, respectively. Uni-axial tensile tests revealed a substantial decrease in the tensile strength of NiTi WM (481 ± 19 MPa), with a reduced joint efficiency of 34%. The localized corrosion performance of NiTi BM was superior to the WM, with electrochemical test responses indicating a pitting potential and low corrosion rate in SBF environments. The corrosion rate of the NiTi BM and WM was 0.048 ± 0.0018 mils per year (mpy) and 0.41 ± 0.019 mpy, respectively. During welding, NiTi’s strength and biocompatibility properties changed due to the alteration in microstructure and formation of intermetallic phases as a result of Ti enrichment. The performance and safety of welded medical devices may be impacted during welding, and it is essential to preserve the biocompatibility of NiTi components for biomedical applications.
1 November 2019 in Applied Mechanics and Materials
Wear is one of the foremost issues faced in manufacturing industries that reduces the lifestyles of machine elements and will increase the running costs. Therefore, hardfacing is extensively employed by industry professionals to minimise the wear of moving components. In this research work, a nickel based alloy recognized as Hastelloy C-276 was strengthened on stainless steel (316L) substrate via the usage of Gas Metal Arc Welding (GMAW) technique. The coating thickness used to be assorted was from 1 to 3 mm on the substrate. The optical microstructure of the interface revealed the defect-free fusion between hardface and substrate metals. Microhardness (Hv) and three-body abrasive put on test have proven that the hardfaced alloy metal posses higher hardness and effective wear resistance. The worn surface morphologies have been found using SEM in order to perceive the involved wear mechanisms.
The Coronavirus disease 2019 (COVID-19) rapidly spread to over 180 countries and abruptly disrupted the production rates and supply chains worldwide. Since then, 3D printing also recognized as additive manufacturing (AM) and known to be a novel technique that uses layer-by-layer deposition of material to produce the intricate 3D geometry, has been engaged in reducing the distress caused by the outbreak. During the early stages of this pandemic, shortages of Personal Protection Equipment (PPE), including facemasks, shields, respirators, and other medical gears, were significantly answered by remotely 3D printing them. Amidst the growing testing requirements, the 3D printing emerged as a potential and fast solution manufacturing process to meet the production needs due to its flexibility, reliability, and rapid response capabilities. In the recent past, some of the other medical applications that have gained prominence in the scientific community include 3D printed ventilator splitters, device components, and patient-specific products. Regarding the non-medical applications, researchers have successfully developed contact-free devices to address the sanitary crisis in public places. This work aims to systematically review the applications of 3D printing or AM techniques that have been involved in producing various critical products essential to limit this deadly pandemic's progression.