Deep learning techniques have, to a certain extent, solved the problem of overreliance on clinical experience for traditional acupoint localization, but the accuracy and repetition rate of its localization still need to be improved. This paper proposes a hand acupoint localization method based on the dual-attention mechanism and cascade network model. First, by superimposing the dual-attention mechanism SE and CA in the YOLOv5 model and calculating the prior box size using K-means++ to optimize the hand location, we cascade the heatmap regression algorithm with HRNet as the backbone network to detect 21 predefined key points on the hand. Finally, “MF-cun” is combined to complete the acupoint localization. The FPS value is 35 and the average offset error value is 0.0269, which is much lower than the error threshold through dataset validation and real scene testing. The results show that this method can reduce the offset error value by more than 40% while ensuring real-time performance and can combat complex scenes such as unequal lighting, occlusion, and skin color interference.
In this article, a novel optimal design method for segmented modification of cycloid gear tooth profile was proposed to improve transmission efficiency. Firstly, the cycloid tooth profile under segmented modification was analyzed. Secondly, the mathematical model of the meshing phase angle of the working segment of the cycloid gear with the highest transmission efficiency was established, and such optimization was achieved by the particle swarm algorithm,and the important indexes were calculated and compared with the basic segmented modification method. Finally, the tooth profile of the cycloid gear under the new design method was obtained by numerical solution. To verify the method, the processing technology of cycloid gear is designed, and the comparison of performance testing between the new proposed method and conventional basic segmented modification was conducted and analyzed by the assembled RV reducer prototype in accordingly. The results show the temperature rise of the RV reducer under the optimized method was reduced by 1.2℃ under the rated load, and the torsional stiffness and transmission efficiency were increased by 0.03N·m/" and 1.8%, respectively, compared with the basic segmented modification method, which shows that this method can effectively overcome the disadvantage of low transmission efficiency under the basic segmented modification method.